ASME B18.6.3 Accredited Testing Labs Worldwide
6 accredited laboratories in 3 countries hold ASME B18.6.3 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASME B18.6.3 scope entries most often cover Al, Angle, Angles in Steel.
Available in 3 Countries
Top matrices for ASME B18.6.3
Top analytes for ASME B18.6.3
- Al (1)
- Angle (1)
- Angles (1)
- Length (1)
- Pitch Diameter (1)
- Straightness (1)
- Tensile Strength (1)
Sample labs
ASME B18.6.3; FIP 1000 Wobble3 Phillips: #1 to #4 Pozi #2 Square #2 1.1° Wobble gage / ASME B18.6.3 Concentricity, Perpendicularity, and Run Out3 Up to 0.19 in 0.00 15 in Dial indicator and fixture, Zoo
Dimensional Testing1 Parameter Range CMC2 (±) Technique / Standard Length (Linear) – 1D 2D Up to 150 mm Up to 300 mm Up to 25 mm X: Up to 200 mm Y: Up to 150 mm 0.04 mm 0.06 mm 0.004 mm 0.0
ASME B18.6.3, B18.6.4 (Withdrawn 2005), B18.6.5M Surface Roughness2 Up to 6.4 µm Profilometer / ASME B46.1 Threads2 – System 21 & 222 External Thread 2 Internal Thread2 (#2 to 1-1/8) in
ASME B18.6.3 Recess penetration/ASME B18.3, B18.3.1M (1986); ISO 23429; DIN 912 (1983) Recess penetration/ ISO 10664; ASME B18.6.3 GO/NO GO gage/ISO 23429; ASME B18.3 Wobble (±15°) Phillips: #1 to #3 51”
ASME B18.6.3 Flat Head3 Up to 1 in 0.00065 in Protrusion gage/ ASME B18.6.3 Straightness3 Up to 1 ½ in .0022 in Linear (0.2”) CMM 3D −− 0-20 in Linear Angular (up to 360°) (560 + 19L) µin
ASME B18.6.3 Threads2 – System 21 2 External Thread Internal Thread #2 – 1 inch M2 – M24 #3 – 1 inch M2.5 – M24 #3 – 1 inch M2.5 – M24 Thread ring gage, ASME B1.2, ASME B1.16M; ISO 1502