ASTM A380 Accredited Testing Labs Worldwide
10 accredited laboratories in 4 countries hold ASTM A380 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM A380 scope entries most often cover Fe, Hardness in Fasteners, Metal, Water.
Available in 4 Countries
Top matrices for ASTM A380
Top analytes for ASTM A380
- Fe (1)
- Hardness (1)
Sample labs
ASTM A380/380M; AWS D1.6/D1.6M; BS EN ISO 17639 Micro Examination BS EN ISO 17639 Failure Analysis ASM Handbook Vol 11, API 571 and Methods listed on scopes SEM and EDS ASTM B 748, ASTM E 1508; EL-M-OP-MET-DOH-MD011
Test: Test Method(s): Hydrogen Embrittlement ASTM F606/F606M; F.I.P. 1000; SAE J81, J1237, J78; ISO 15330; SAE USCAR 7; ASME B18.13, B18.13.1M, B18.6.3, B18.6.5M;
ASTM A380/A380M, A967/A967M, F1089 Peel ASME (Section IX) Powder Characterization Apparent Density (Carney) ASTM B417 Apparent Density (Hall) ASTM B212 Apparent Density (Scott) ASTM B329 Carney Flow Rate ASTM B964 Flow Rate (Hal
ASTM A380 (Paragraph 7.2.5.3) Metallographic Evaluation Grain Size (Comparison) ASTM E112 Microstructure Evaluation ASM HBK Vol. 9 Failure Analysis MM00091; ASM Handbook Vol. 11 Optical Microscopy MM00201 1In-house method
ASTM A380; MIL-STD-753 (Method 102) Exfoliation Corrosion ASTM G34 Humidity Testing AMS-QQ-P-35; AMS2700 Intergranular Corrosion Susceptibility ASTM A262 (Practices A and E), ASTM G110 Salt Spray (Fog) ASTM B117; ISO 9227; MIL-STD-810
ASTM A380/A380M, A967/A967M Degree of Rusting - Visual and Image Analysis Software ASTM D610 Mechanical Tests Tensile/Tension ASTM A48/A48M, A370, B557, E8/E8M, E517, F606/F606M, E646 Lap Shear ASTM D1002 Hardness Superfic
ASTM A380/A380M (8.2.5.2); ASTM A967/A967M (14.2 Practice B); ASTM D1735; ASTM D2247; ASTM D4585/D4585M;
ASTM A380/A380M Nondestructive Analysis Magnetic Permeability ASTM A342/A342M (Method 3) XRF PMI Analysis Niton Alloy Analyzer User’s Guide Ultrasonic Testing ASTM E114, A388/A388M
ASTM A380, A967 Practice B & D Humidity Exposure MIL-STD-1312-3; NASM 1312-3 Corrosion Testing Determining the Susceptibility to Intergranular Corrosion of 5xxx Series Aluminum Alloys by Mass Loss after Exposure to Nitric Acid (NA
ASTM A380 Metallographic examinations 29. Duplex stainless steel Determination of the volume fraction of ferrite (delta-ferrite) in Duplex stainless steels ML 00302 E In house method ASTM E562 Ri