ASTM B117 Accredited Testing Labs Worldwide

ASTM B117-19 ISO 9227:2022 +A1:2024. Corrosion Resistance to Modified Salt Spray (Fog) Testing (Acetic Acid) ASTM G85 – 19 ISO 9227:2022 +A1:2024. END

ASTM B117 Constant Acceleration Testing 1 Up to 20 G Forces Crash Safety Testing IEC 60068-2-7; MIL-STD 810E/F/G Sec. 513; MIL-STD 202G Method 212A RTCA DO-160 D, E, F, G Sec. 7.3 Altitude Testing1 (-2,000 to 70,000) Fe

ASTM B117; ISO 9227 Torque Tension GMW 3044; ISO 16047; SAE/USCAR 10, 11

Bereich Norm / Hausverfahren / Version Titel der Norm oder des Hausverfahrens (ggf. Abweichungen / Modifizierungen von Normverfahren angeben) Prüfbereich / Einschränkung DIN EN 62271-105 VDE 0671-105 2013-08 Hochspannungs

This document is a translation. The definitive version is the original German annex to the accreditation certificate. 3. Testing for protection against water – Examination of enclosures of technical equipment regarding the ingress of w

ASTM B117-19 Tecnica di prova O&I Nebbia salina Metodo di prova Tecnica di prova O&I Durezza Rockwell/Rockwell hardness (scala C) Durezza Vickers/Vickers hardness (HV 1 HV 0,5 HV 10) UNI EN ISO 6508-1:2024 UNI EN ISO 6507-1:2023

ASTM B117 Detection Susceptibility to Intergranular Attack in Austenitic Stainless Steels ASTM A262 Practice A and E Chemical Testing *Spark Emission Spectrometric Chemical Analysis Al Base (Si,Fe,Cu,Mn,Mg,Cr,Ni,Z

ASTM B117-73, -94, -97, -02, -03, -07, -09, -11, -16, -18, -19 Rain/Drip/Blowing Rain 1 (Up to 40mph) RTCA/DO-160 B, C, D, E, F, G (Section 10); MIL-STD-810 Base, A, B, C, D, E, F, G, H, (Method 506) Freezing Rain RTCA/DO-160

ASTM B117 2019 Standard Practice for Operating Salt Spray (Fog) Apparatus ASTM D2240 2021 Standard Test Method for Rubber Property Durometer Hardness ASTM F2913 2019 Standard Test Method for Measuring the Coefficient o

ASTM B117 Solderability ASTM B678; QQ-S-365 Taber Abrasion ASTM D4060; ASTM B1023; FED-STD-141 (Method 6192.1) Wet Tape Adhesion ASTM D3359; FED-STD-141 (Method 6301.3); MIL-DTL-5541; MIL-PRF-23377; ASTM D823 (Method D)

ASTM B117; ISO 9227 Surface Roughness ASME B46.1 Discontinuities ASTM A574, A574M (2012), F788 (Exclude Sec. S1), F812, F912; ISO 6157-1; 6157-2, 6157-3 (Exclude Sec. 3.6); XRF PMI Analysis

4.2 Prüfung der Korrosionsbeständigkeit von Werkstoffen und Bauteilen mit metallischen, anorganischen und organischen Überzügen auf metallischen und organischen Substraten in künstlichen Atmosphären – Salzsprühnebelprüfung, CASS Test, AA

ASTM B117-18 B Aeronautical and automotive components Assessment of cleanliness: Residue Quanitity Particle Size DER-LAB-TP-078 based on RRP59016 B Iron, steel, nickel alloys and titanium alloys Oxygen, Nitrogen DE

ASTM B117; FLTM BI 103-01; GMW3172; GMW3286; HES D2021 [REV 3]; HES D6501 [REV 3] Sect. 3.15; IEC 60068-2-11; IEC 60068-2-52; ISO 9227; MIL-STD-202F, G, H, Method 101; MIL-STD-810D, E, F, G, H, Method 509; NES M0140 [2014-N]; N

ASTM B117; Ford BI 103-01; GM 4298P (2010); GMW3286; Honda HES D6501, Sections 3.15.1 and 3.15.2; ISO 9227; JIS H8502; JIS Z2371; SAE USCAR-1; VOLVO STD 423-0010 Pitting Corrosion ASTM G46; Ford CA 005-01 Scanning Electron Micro

ASTM B117 BS EN ISO 9227 BS EN ISO 7253 (withdrawn) KES Scratch Resistance ISO 1518-1 Specific Electrical Insulation Resistance BS EN 10290 Annex F KES Volatile Organic Compound Content ISO 11890-1 KES Vo

ASTM B117 DO-160 EIA-364-26 MIL-STD-810 MIL-STD-38999 PRO01 Helium Leak Helium Leak Rate: (1 x 10^-5 atm.cc/s to 1 x 10^-9 atm.cc/s) EIA-364-02 MIL-STD-38999 PRO03 Altitude (Up to 100,000 Feet) Temp (-65 to 200) °C EIA 364

ASTM B117; ASTM G85; GR-487-CORE; MIL-STD-810, Method 509; NEMA 250 (2014); RTCA/DO-160, Section 14; SAE J1455; UL 50 (2007); UL 50E (2007); IEC 60068-2-11; IEC 60945, Section 8.12; GR-3121-CORE; GR-3125-CORE; GR-13-CORE; GR-77

ASTM B117 UV (Xenon, Fluorescent) ASTM G151, G154, G155

ASTM B117, D610, D1654; GM9102P (Inactive 2010); GMW15282 Environmental Humidity Salt Spray ASTM D1735, D2247 ASTM B117; FLTM BI 103-01; ISO 9227(NSS); JIS Z2371 High Heat Exposure (Up to 700° F) WI-038 Metallographic Evalua

ASTM B117; DIN 50 021-SS, DIN EN ISO 9227 NSS; HES D6501; KKK-A1822-F The laboratory is only accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specific

ASTM B117; ISO 9227 Single Shear Test (to 10 Tons) ASTM F606/F606M Tensile (to 10 Tons) Axial Only ASTM F606/F606M, E8/E8M Torsional Strength SAE J78, J81, J933, J1237

1. Determination of the corrosion resistance of surfaces and coatings using environmental simulation tests * DIN EN ISO 9227 2017-07 Corrosion tests in artificial atmospheres - Salt spray tests DIN EN 60068 -2-11 2000-02 Envi

ASTM B117-19 Assistive products for persons with disability CORROSION, SALT (salt spray) BS EN 12182:2012

ASTM B117; ISO 9227, NASM 1312-1 Humidity ASTM D1735; NASM 1312-3 Other: Failure Analysis (using the test technologies listed above) ASM Metals Handbook Vol. 11 Heat Treat3 SAE-AMS-H6875, AMS 2750

ASTM B117, B537, D610, D714, G85; GM4350M (superseded 2013 except Chip Resistance)2, GM4298P (superseded 2010)2, GM4476P (superseded 2010)2, GM9540P (superseded 2010)2; RTCA/DO-160 C/D/E/F/G/H; MIL-STD-202F; MIL-STD-810 C/D/E/F/G/H

ASTM B117 1In-house test method

ASTM B117; IEC 60068-2-52; GMW3172; MIL STD 810G Method 509.5; Ford ES-5L1T-14A067-AA Cyclic Corrosion* GMW14872; SAE J2334; Ford CEPT:00.00-L-467 Dust Testing* GMW3172; GMW3431; DTNA 49-00085; SAE J1455 Resistanc

ASTM B117; DIN 50021 (Salt Spray only); DSM ESX-71227 (4.5); FORD FLTM BI 103-01; FUJI TS371-00-009 (4.2.7), TS430-07-089 (6.5); GM 4298P (Inactive 12/10); GMW 3286, GMW3172 (9.4.8); ISO 9227; HINO HTSH1552; HONDA HES D6501 (3.15);

ASTM B117 Attaque corrosive accélérée par un brouillard salin artificiel Enceintes de brouillard salin de volumes utiles : 1150 x 800 x 1100mm 800 x 600 x 800mm # Accréditation rendue obligatoire dans le cadre réglementaire

ASTM B117; MIL-STD-810E/F/G, Method 509.4; IEC 61827 Scratch Resistance ATPD-2352 Seal/ Leakage/Immersion 49 CFR 571.108; CMVSS 108; FAA AC 150/5345, -46, -42; IEC 61827; IEC 61823; FAA AC 150/5345-26 Shock FAA AC 150/5345, -4

ASTM B117; FMVSS 108 (49 CFR 571.108); CMVSS 108; SAE J575 Aim Range FMVSS 108 (49 CFR 571.108); CMVSS 108 Lens Abrasion FMVSS 108 (49 CFR 571.108); CMVSS 108 Chemical Resistance FMVSS 108 (49 CFR 571.108); CMVSS 108; SAE J

ASTM B117 Modified Salt Spray (Fog) Testing ASTM G85 (except Annex A4) Testing Water Resistance of Coatings in 100% Relative Humidity ASTM D2247 Testing Water Resistance of Coatings Using Water Fog Apparatus ASTM D1735 Paints and varni

ASTM B117 Spec GE S400 (code AI0Q) Attaque corrosive accélérée par un brouillard salin artificiel # Accréditation rendue obligatoire dans le cadre réglementaire français précisé par le texte cité en référence dans le document Cofrac

ASTM B117-19 Tecnica di prova O&I Nebbia salina Materiali metallici e loro rivestimenti (organici ed inorganici)/Metallic materials and organic and inorganic coatings, Materiali metallici/Metallic materials, Rivestimenti metallici su su

ASTM B117, B368 (CASS); ISO 9227 Metallography Coating Thickness ASTM B244, B487, B499; ISO 1463 Discontinuities in Chromium Plating ASTM B456 (Appendix X4 and X5) Micro-Hardness Knoop (25, 50, 100, 500) gf Vickers (25, 50, 100, 5

ASTM B117 Metalliska material Ja 2 Nej SS-EN 1670 Byggprodukter Ja 2 Nej SS-EN IEC 60068-2-11 Metalliska material Ja 2 Nej SS-EN ISO 9227 Metalliska material Ja 2 Nej Excl. para 5.2.4 CASS Visuell bedömning ASTM D610 Färg och lack Ja 2 Nej

ASTM B117 I. Dimensional Testing1: Parameter Range CMC2 (±) Technique / Method Threads3 Pitch diameter #4 to 1½ in M2 to M30 Up to 2 in Up to M48 N/A N/A 0.0006 in Rings, plugs / ASME B1.2, B1.16M (System 21)

ASTM B117-19 Tecnica di prova O&I Nebbia salina Materiali metallici e loro rivestimenti (organici ed inorganici)/Metallic materials and organic and inorganic coatings, Materiali metallici/Metallic materials, Rivestimenti metallici su su

ASTM B117-19 END

ASTM B117 Salt Spray (Fog) Testing WEATHERING AND CORROSION EVALUATIONS: DRY FILM THICKNESS (DFT) ISO 2178 Thickness of Coating on Magnetic Substrates ISO 2360 Thickness of Coating on Non-Magnetic Substrates ASTM D7091 Dry Film Thick

ASTM B117 Magnetic Permeability ASTM A342/A342M Impact Testing (Charpy Only) ASTM E23; ISO 148-1 Torque Tension IFI 101; ISO 16047

ASTM B117 Practice for Operating Salt Spray (Fog); ISO 9227:2006(E) Neutral Salt Spray; MIL-DTL-81706, Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys, par. 4.5.1; MIL-DTL-5541 Chemical Conversion Coatings on Alu

ASTM B117-19 UK HELMETS Physical Testing Helmets Electrically insulating helmets for use on low voltage installations EN 50365:2002 (withdrawn) UK RESPIRATORY PROTECTION Physical & Flammability Testing

ASTM B117; ISO 9227; SAE/USCAR-1 Water Fog Humidity Test GM 4465P; GM 14729 Grain Flow Pattern SAE/USCAR 8 Chromate Conversion Coating ISO 3613 (6.5.2 C1 only); EN 15205(Withdrawn 2012); DIN 50993 (Withdrawn 2009) C

Test Description Test Method(s)1: Environmental-Climatic High/Low Temperature (continued) IEC/EN 60945 (Clause 8.2, 8.3, 8.4); EN 302 054; DEF(AUST)5681 (Clause 7.2.1, 7.2.2 Procedure B, 7.2.3, 7.2.4); DEF STAN 00-35 (Tes

ASTM B117 Salt Spray; RTCA DO160G: IEC/EN 50155:2007; 2017; 2021; MIL-STD-810 D, E, F, G, G w/Change 1, H, H w/Change 1; AECTP 300 (Edition 3); DEF STAN 00-035:2006, 2017; DEF(AUST)5681:1998; SAE J1455; MIL-STD-202G; ISO 15003; G

ASTM B117; IEC 60068-2-11; CNS 15481-4, CNS 3627; MIL-STD-202 Method 101, MIL-STD-810 Method 509; EN 50155; ISO 16750-4, ISO 9227 Industry Gas Test IEC 60068-2-42, IEC 60068-2-43, IEC 60068-2-60; EIA 364-65; GR- 63-Core; I

genormte oder ihnen gleichzusetzende Prüfverfahren [Flex A] Fachbereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren Salznebel / Korrosion VW 80000 2017-10

ASTM B117 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments ASTM D1654 Flammability of Blankets ASTM D4151 Standard Test Method for Impact Resistance of Flat, Rigid Plasti