ASTM D1424 Accredited Testing Labs Worldwide
15 accredited laboratories in 5 countries hold ASTM D1424 in their accredited scope. We don't know yet whether 5 of them take outside work. Primary accreditors include American Association for Laboratory Accreditation, Italian Accreditation Body.
Available in 5 Countries
Sample labs
ASTM D1424 Section 7.3 Bursting Strength ASTM D3786 Section 7.4 Colorfastness AATCC TM61, 2A Section 7.5 Dimensional Change AATCC TM135 Section 7.6 Flammability ASTM D6413; AATTC TM135 (Washing 25x) Section 7.8 Actua
ASTM D1424 2021 Standard Test Method for Tearing Strength of Fabrics by Falling - Pendulum (Elmendorf-Type) Apparatus ASTM D1683/D1683M 2022 Standard Test Method for Failure in Sewn Seams of Woven Fabrics ASTM D1907/D1907M
ASTM D1424 Standard Test Method for Tearing Strength of Fabrics by Falling- Pendulum Type (Elmendorf) Apparatus ASTM D1683 Test Method for Failure in Sewn Seams of Woven Fabrics (Discontinued 1999) (as per CAN/CGSB 4.2 No. 32.2) ASTM D17
ASTM D1424 Tearing Strength of Fabrics by Tongue Procedure ASTM D2261 Vertical Wicking of Textiles AATCC 197 Vertical Wicking of Textiles AATCC 213 Warp End Count and Filling Pick Count of Woven Fabric ASTM D3775 Mass Per Unit Area (
ASTM D1424-21 Massa areica e massa per unità di lunghezza/Mass per unit area and mass per unit of lenght BS 2471:2005 Massa areica e massa per unità di lunghezza/Mass per unit area and mass per unit of lenght UNI 5114:1982 Pendolo bali
ASTM D1424, ASTM D1922, ASTM D5734 (2008); CFFA-16 a, CFFA-26 b; ISO 6383 Stitch ASTM D4705; GM9149P (2015) Tongue ASTM D751, ASTM D1117, ASTM D1938, ASTM D2261; CFFA-16 b; Chrysler LP-463KB-3-01; Honda HES D6511; ISO 4674-1
ASTM D1424 Tear Strength of Fabrics: Tongue Method ASTM D2261 Tear resistance, Rubber- or Plastics-Coated fabrics ISO 4674-1 Tear force of trouser-shaped specimens Tensile Properties of Yarn ISO 13937-2 ASTM D2256, Conditions 1-4 Ten
ASTM D1424-21 ISO 22198:2006 EN 12127:1997 ISO 9237:1995 ASTM D737-18 ASTM D3776/D3776M-20 - solo/only opzione C _ Propagazione della fiamma di provini verticali dopo lavaggio a secco/Flame spread of vertically oriented specimens aft
Test Discipline Test Name Test Method(s)1 Physical Tear Strength Textile Elmendorf Tearing Test ISO 13937-1, ASTM D 1424, ASTM D1922 Tensile Strength Tensile Strength and Elongation ASTM D638; ASTM D412; ASTM D882; ASTM D5034;
ASTM D1424-21 Pendolo balistico (Elmendorf) Pendolo balistico (Elmendorf) ASTM D3776/D3776M-20 - solo/only Opzione C, paragrafo 9 _ GB/T 2912.1:2009 Spettrofotometria UV-VIS ISO 14184-1:2011, JIS L 1041:2011, KS K ISO 14184-1:2018, S
ASTM D1424 Tensile Strength ASTM D5034, D5035 Vertical Flammability ASTM D6413 Martindale Abrasion ASTM D4966 Martindale Pilling Resistance ASTM D4970
ASTM D1424 Absorbency AATCC 79, Option B Crocking AATCC 8 Pick & End Count ASTM D3775 Home Wash AATCC 135, Option 2 Industrial Wash AATCC 96, Option 2; NFPA 2112 Shrinkage AATCC 96, Option 2; AATCC 135, Option 2; AATC
ASTM D1424; ASTM D2261; ASTM D5587; ISO 6383-1; GMW3326; HES D6506 Sec 5.6; ISO 13937-2; 8320Z-SW5-9000 Sec 5.6; NES M0154 Sec 14; TS 343-08-009 Sec 6.4; TSL3610G Sec. 7.4 Tensile/Elongation 8320Z-SW5-9000 Sec 5.4; ASTM D5034;
ASTM D1424-21 - escluso/except § 10.5 Pendolo balistico (Elmendorf) Massa areica. Metodo per piccoli campioni/Mass per unit area. Small sample method (50-350g/mq) UNI EN 12127:1999 - escluso/except paragrafo 8.4 Gravimetria pH dell'es
Anexo Técnico/Technical Annex Nº 12/LE025 Rev./Ed. 92 Pág./Page 70 de/of 105 Accreditation will remain valid until notification to the contrary. This accreditation is subject to modifications, temporary suspensions and withdrawal. Its v