ASTM D4541 Accredited Testing Labs Worldwide
12 accredited laboratories in 7 countries hold ASTM D4541 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D4541 scope entries most often cover Air Leakage, Carbon, Compressive Strength in Water, Drinking water, Oil.
Available in 7 Countries
Top matrices for ASTM D4541
Top analytes for ASTM D4541
- Air Leakage (1)
- Carbon (1)
- Compressive Strength (1)
- Pull-Off Strength (1)
- Volatile Organic Compound Content (1)
- Weight Loss (1)
Sample labs
ASTM D4541 BS EN ISO 4624 Coat 011 KES Resistance to humidity (Cyclic Condensation) BS 3900-F2 KES Resistance to Sulphur Dioxide ISO 22479 KES (Humid Atmosphere) BS EN ISO 3231:1998 Salt Spray Testing ASTM B1
ASTM D4541 Method D; API RP 5L7 Appendix 9; ISO 4624 Method B Adhesion by Tape Test ASTM D3359; ISO 2409 Water Vapor Transmission ASTM D1653, Method B-Wet Cup, Condition C; ASTM E96/ASTM E96M, Water Method; Water Absorption ASTM D570
ASTM D4541 Pull-Off Strength of Coatings Using Portable Adhesion Testers ASTM D6532 Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens ASTM D6578 Determination of Graffit
ASTM D4541; ISO 4624, ISO 2409; ASTM D3359 Peel Strength Test ISO 21809-3 Annex H; ISO 21809-1 Annex C; EN 12068 Thickness ISO 2808 method 7B2; ASTM B499; ASTM A775; ASTM D7091; ISO 21809-1 Annex A; ISO 21809-3 Annex B Environm
ASTM D4541-22 - solo/only Metodo E _ Pitture/Paints, Vernici/Varnishes Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Brillantezza a 20 gradi, a 60 gradi e 85 gradi/Gloss value at 20 degrees, 60 degree
ASTM D4541 Tg by DMA ASTM D7028 Flatwise Tensile Strength of Sandwich Constructions ASTM C297 Climbing Drum Peel for Adhesives ASTM D1781 Tensile Properties of Plastics ASTM D638 Tensile Strength ISO 527-2 and -5 Compression of Rigid
ASTM D4541, D7234; ISO 4624, 16276-1 Construction Weight AMS3819 – 3.1, 3.6.1; ASTM D3776M Color/Cleanliness AMS3819 – 3.3, 3.4 Workmanship Silicone Greases and Oils AMS3819 – 3.5 AMS3819-4.7.7; ASTM E168 Water Absorption
ASTM D4541 Annex A4 Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking ASTM D4797 Evaluation of Color and Calculating (Yellowness and Whiteness Indices) of Thermoplastic Material ASTM D4960 Standa
ASTM D4541, ASTM D5179, EN 12068, ISO 2409, ISO 4624, ISO 6272-1, ISO 12944-6, ISO 12944-9, NORSOK M-501, ISO 21809-1, ISO 21809-2, ISO 21809-3 AM
ASTM D4541 (A4, Method E); FED-STD-141 (Method 6301.3); Ford FLTM BI 106-01; Fuji/Subaru TS430-07-082 (9.5); GM 9071P (2002); GMW14829; Harley Davidson ES805-07012 (6.3); Honda 4251Z-SEP-A000 (5.1); Honda 5100Z-SE0-0000 (6-5); Hond
ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers ASTM D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
ASTM D4541 Standard Test Method for Pull O ff Strength of Coatings Using Portable Adhesion Testers ASTM D6132 Standard Test Method for Nondest ructive Measurement of Dry Flim Thickness of Applied Organic Coatings Using an Ultrasonic Co