ASTM D5035 Accredited Testing Labs Worldwide
12 accredited laboratories in 5 countries hold ASTM D5035 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle. In the register, ASTM D5035 scope entries most often cover Breaking Strength, Seam Slippage, Voc Emissions in Plastics, Textile, Bituminous material.
Available in 5 Countries
Top matrices for ASTM D5035
Top analytes for ASTM D5035
- Breaking Strength (1)
- Seam Slippage (1)
- Voc Emissions (1)
Sample labs
(A2LA Cert No. 3977.08) Revised 12/22/2025 Page 4 of 4 Test: Test Method: Non-Metallic Testing (cont.) Water Absorption ASTM D570 Melt Flow Rate ASTM D1238 Method A only; ISO 1133-1 Method A only Coefficient of Linear Expansion A
ASTM D5035 2019 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Strip Method) ASTM D5171 2020 Standard Test Method for Impact Resistance of Plastic Sew -Through Buttons ASTM D638 2022 St
ASTM D 4491a 2021 Normprüfverfahren zur Bestimmung der Wasserdurchlässigkeit von Geotextilien G ASTM D 4533 2015 Normprüfverfahren zu Bestimmung der Reißfestigkeit von Geotextilien (Trapezverfahren) G ASTM D 4595 2011
ASTM D5035 -11 2019 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) ASTM D7142 -05 2021 Standard Test Method for Holding Strength of Prong -Ring Attached Snap Fasteners ASTM F963 -17
ASTM D5035 Breakin g Force and Elongation of Textile Fabrics (Strip Method) ASTM D5045 Standard Test Method for Plane- Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials ASTM D5083 Tensile Properties of Reinfo
ASTM D5035; CFFA-17, CFFA-27; Chrysler LP-463KB-2-01, LP-463KB-22-01; DIN 53504; Ford FLTM BN 013-07, FLTM BN 150-04, GMN6753 (2012); GMW3010, GMW14148; Honda HES D6506, HES D6507, HES D6511; ISO 37, ISO 527, ISO 1184, ISO 14
ASTM D5035 Strength/Elongation, Rubber- or Plastics-Coated Fabrics ISO 1421 Stretch Properties of Knitted Fabric ASTM D2594 Stretch Properties of Textiles ASTM D6614 Stretch Properties of Woven Fabric With Stretch Yarn ASTM D3107 Taber
ASTM D5035; Chrysler LP-463KB-2-01; TSL 5100G (Section 4.3); ISO 527-1, 2; GMW3010; ISO 1926; TSM 7500G (Section 5.2); DBL 5578 (Section 7.2); DIN 53504; ISO 1798; ISO 3376
ASTM D5035 – 11 (Reapproved 2019) Bubble Emission Test (Reapproved 2021) ASTM D3078 − 02 Burst Test ASTM F1140/F1140M − 13 (Reapproved 2020) (Section 9.1 & 9.1.1 Test Method A (Burst Test, Open Package Test)) Determination of Basis We
ASTM D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) ASTM D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics
ASTM D5035; ISO 527-1,2; ASTM D903; ISO 11339; ASTM D1004; ISO 13934-1; ASTM D3330-4 (Except Type F Item 16); DBL 5404; DBL 1232 (Table 4 cons. 1); DBL 1224 (Table 3 cons. 1); LP-463KB-2-01; GMW3010(A1 and A4 sample type); MW3041_3.3.
Test Description/ Equipment Parameter Test Method(s): Linear Abrasion (Taber) (0.2 to 4.0) inch stroke length, (2 to 75) cycles/minute, 2100 gram max load GMW 14130; ISO 1518 Martindale Abrasion LP-463KC-04-03; ISO 12945-2 (pilli