ASTM D6110 Accredited Testing Labs Worldwide
11 accredited laboratories in 2 countries hold ASTM D6110 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D6110 scope entries most often cover Aluminum, Fogging, Notch Depth in Plastics.
Available in 2 Countries
Top matrices for ASTM D6110
Top analytes for ASTM D6110
- Aluminum (1)
- Fogging (1)
- Notch Depth (1)
Sample labs
ASTM D6110 Ionic Cleanliness - Conductivity IPC-A-600; IPC-4202; IPC-6012; IPC-TM-650 (Methods 2.3.25.1 and 2.3.25); MIL-P-50884 2; MIL-PRF-50884 2; MIL-PRF-31032 2; MIL-PRF-55110 2 Mass and Thickness (Reusable Bags) ANA-0024
ASTM D6110 ASTM E8/E8M ASTM E112 ASTM E1251 Coefficient of Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E831 Rubber – Determination of Tensile Stress-Strain Properties ISO 37 Determinatio
Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60
ASTM D6110 Test Method for Determining th e Charpy Impact Resistance of Notched Specimens of Plastics ASTM D6264 Test Method for Measuring the Damage Resistance of a Fibe r-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-S
ASTM D6110; JIS K7111-1, JIS K6911 (Section 5.20); ISO 179-1; UL746A (Section 15); CSA C22 No.17 (Section 5.2) Heat Deflection Temperature (HDT) UL746A; ASTM D648; ISO 75-1, 75-2; JIS K7191-1, JIS K7191-2 Vica
ASTM D6110; DIN 53453; GMW14093, ISO 179, ISO 180; Rivian RTS.1776; Toyota TSM 0501G
Test(s): Test Method(s) 1: Peel Strength ASTM D903, D3330/D3330M Pendulum Impact ASTM D256, D4812, D6110; ISO 179-1, 180 Shear ASTM C273 / C273M, D732, D2344 Slow Rate Puncture ASTM F1306; MIL STD 3010 Tea
ASTM D6110; FAA AC 150/5345-42 Accelerated Life Test FAA AC 150/5345-46; FAA EB-67 Humidity 2 (5 to 95) %RH MIL-STD-810 (C/E/F/G/H), Methods 507 and 520; MIL-STD-202 (F/G/H), Methods 103 and 106; SAE J1455, Sections 4.2 and 4.1
ASTM D6110 Standard test method for determining the Charpy impact resistance of notched specimens of plastics ASTM D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds (section 7 only) ASTM D6662 Standard specific
Building AP14 Test: Test Method(s): Non-Metallic Materials Testing Specimen Preparation of Composite Materials ASTM D5687/D5687M Specimen Conditioning ASTM D5229, EN 3615 Mechanical Properties Charpy / IZOD Impact ASTM D2
IV. Plastic Industry: Specific Measurements Parameter/Equipment Range CMC2 (±) Comments Verification of Izod or Charpy Notch Depth – Radius Angle Depth Up to 0.5 in (15 to 45)° (0.001 to 0.5) in