10 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D6110 testing. These labs commonly handle Plastics matrices. From the accredited scope text: “ASTM D6110 Test Method for Determining th e Charpy Impact Resistance of Notched Specimens of Plastics ASTM D6264 Test Method for Measuring the Damage Resistance of a Fibe r-Reinforced Polymer-Matrix C” “ASTM D6110 Standard test method for determining the Charpy impact resistance of notched specimens of plastics ASTM D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds (section” “ASTM D6110; FAA AC 150/5345-42 Accelerated Life Test FAA AC 150/5345-46; FAA EB-67 Humidity 2 (5 to 95) %RH MIL-STD-810 (C/E/F/G/H), Methods 507 and 520; MIL-STD-202 (F/G/H), Methods 103 and 106; SAE” “ASTM D6110 ASTM E8/E8M ASTM E112 ASTM E1251 Coefficient of Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E831 Rubber – Determination of Tensile Stress-Strain Properties”
Anaheim, CA, US
ASTM D6110 Ionic Cleanliness - Conductivity IPC-A-600; IPC-4202; IPC-6012; IPC-TM-650 (Methods 2.3.25.1 and 2.3.25); MIL-P-50884 2; MIL-PRF-50884 2; MIL-PRF-31032 2; MIL-PRF-55110 2 Mass and Thickness (Reusable Bags) ANA-0024
Ithaca, NY, US
ASTM D6110 ASTM E8/E8M ASTM E112 ASTM E1251 Coefficient of Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E831 Rubber – Determination of Tensile Stress-Strain Properties ISO 37 Determinatio
Broken Arrow, OK, US
Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60
Duarte, CA, US
ASTM D6110 Test Method for Determining th e Charpy Impact Resistance of Notched Specimens of Plastics ASTM D6264 Test Method for Measuring the Damage Resistance of a Fibe r-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-S
Harper Woods, MI, US
ASTM D6110; DIN 53453; GMW14093, ISO 179, ISO 180; Rivian RTS.1776; Toyota TSM 0501G
Kentwood, MI, US
Test(s): Test Method(s) 1: Peel Strength ASTM D903, D3330/D3330M Pendulum Impact ASTM D256, D4812, D6110; ISO 179-1, 180 Shear ASTM C273 / C273M, D732, D2344 Slow Rate Puncture ASTM F1306; MIL STD 3010 Tea
Downers Grove, IL, US
ASTM D6110; FAA AC 150/5345-42 Accelerated Life Test FAA AC 150/5345-46; FAA EB-67 Humidity 2 (5 to 95) %RH MIL-STD-810 (C/E/F/G/H), Methods 507 and 520; MIL-STD-202 (F/G/H), Methods 103 and 106; SAE J1455, Sections 4.2 and 4.1
York, PA, US
ASTM D6110 Standard test method for determining the Charpy impact resistance of notched specimens of plastics ASTM D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds (section 7 only) ASTM D6662 Standard specific
Youngstown, PA, US
Building AP14 Test: Test Method(s): Non-Metallic Materials Testing Specimen Preparation of Composite Materials ASTM D5687/D5687M Specimen Conditioning ASTM D5229, EN 3615 Mechanical Properties Charpy / IZOD Impact ASTM D2
Belpre, OH, US
IV. Plastic Industry: Specific Measurements Parameter/Equipment Range CMC2 (±) Comments Verification of Izod or Charpy Notch Depth – Radius Angle Depth Up to 0.5 in (15 to 45)° (0.001 to 0.5) in
This page is a fixed slice of the register: every ASTM D6110 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.