ASTM E18 Accredited Testing Labs in United States

ASTM E18 Salt Spray ASTM B117; ISO 9227 Torque Tension GMW 3044; ISO 16047; SAE/USCAR 10, 11

ASTM E18 Torque Wrenches 4– Snap Type Dial and Beam (5 to 50) ozf·in (20 to 200) ozf·in (5 to 50) lbf·in

ASTM E18-25,-24 Standard Test Method for Security Glazing Materials And Systems ASTM F1233-21 Standard Test Method for Timed Evaluation of Forced-Entry- Resistant Systems ASTM F3038-21 Standard Practice for Abrasion Resistance of Printed

ASTM E18 Torque Wrenches 3 10 lbfꞏin to 250 lbfꞏft 0.92 % setting Torque transducers ________________________________________ 1 This laboratory offers commercial and on-site calibration service. 2 Calibration and

ASTM E18

ASTM E18 Metallography Macroetching ASTM E381 Tensile Yield, Tensile, Reduction of Area, Elongation (Room temperature: 0 - 120,000 lb) ASTM A370, B557, E8/E8M Chemical Spark Atomic Emission Spectrometry – Steel, Stain

ASTM E18, A370 Microindentation (Knoop, Vickers) ASTM E384 (100g, 300g, 500g) Carburization/Decarburization via the Chord Method ARP 1820 Room Temp. Tensile (up to 40 000 lb) ASTM E8/E8M, A370, B557 Elevate

ASTM E18 Indirect Verification of Microindention Hardness Testers 3 (Vickers) 500g Force (100 to 240) HV (240 to 600) HV 11 HV 11 HV ASTM E92

ASTM E18; MPIF 43 Microhardness (Knoop & Vickers, (100, 200) g) ASTM B933, B934, E384; MPIF 51, MPIF 52 Metallography Microstructure Microetching Carbon Content MPIF STD 35 (PM Structural Parts only) ASTM E407 LS 0

ASTM E18

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 IMR TEST LABS - PORTLAND 5687-A SE International Way Portland, OR 97222 Juile Sheufelt Phone: (503) 653 2904 MECHANICAL Valid To: September 30, 2027 Certificate Numbe

ASTM E18 Hardness Testers – Brinell HBW 10/3000 HBW 10/3000 HBW 10/1500 HBW 10/1000 HBW 5/750 HBW 10/500 HBW 10/250 HBW 2.5/187.5 HBW 2.5/62.5 (95 to 650) HBW (96 to 650) HBW (48 to 327) HBW

ASTM E18, E110 Indirect Verification of Brinell Hardness Testers3 500 kgf HBW 1500 kgf HBW 3000 kgf HBW 4.6 HBW 7.7 HBW 8.3 HBW Indirect verification method per ASTM E10 _____________________________________

ASTM E18, A370 (Section 18), F606/F606M; NASM-1312-6 Superficial Rockwell Hardness (HR15N, HR30N, HR45N, HR15TW, HR30TW, HR45TW, HR15WW) ASTM E18, A370 (Section 18); NASM-1312-6 Vickers (1 to 10) kgf ASTM E92, F606/F606M Char

ASTM E18, E140 Tensile, Yield, Elongation, n Value, r Value ASTM A370 (Sections 7-14), E8/E8M, E517, E646 Torque WI-023, -042, -046 Vibration High Temperature (1900° F (1037° C) Up to 180 CFM) Mechanical Cycling (Load Driven Up to

ASTM E18 Universal Testing Machine, Compression Testing Machines, Tension Testing Machines 3 (0.5 to 500) lbf (100 to 1000) lbf (200 to 2000) lbf (500 to 5000) lbf (1000 to 10 000) lbf (2500 to 25 000) lbf (5000 to

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 DICKSON TESTING COMPANY, INC. 11126 Palmer Avenue South Gate, CA 90280 Ronald Arevalo Phone: 562 862 8378 MECHANICAL Valid To: April 30, 2026 Certificate Number: 1772.02

ASTM E18 Hardness, Vickers (Scales HV0.2, HV0.5, HV1, HV5 and HV10) ASTM E92; ASTM E384; BS EN ISO 9015-1; ISO 6507-1 Impact, Charpy V-Notch (-321 to +212) °F ASTM A370, A923 (Method B), E23; BS EN ISO 9016; ISO 148-1 Nick –

ASTM E18, F606/F606M; NASM 1312-6; ISO 6508, ISO 898-5 (6.1.3) Jominy Hardenability ASTM A255; SAE J406, ISO 642 Microhardness:

ASTM E18 ASTM E110

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TITAN METALLURGY, L.L.C. 10400 Capital Avenue Oak Park, MI 48237 Steve Avery Phone: 248 543 3578 E-mail: testing@titanmetallurgy.com MECHANICAL Valid To: November

ASTM E18 indirect verification method, Hardness test blocks Knoop & Vickers Hardness Testers 3 505 HV 1.0 500 HK 0.5 12 HV 17 HK Indirect verification per ASTM E384 / E92 using Knoop & Vickers Test Blocks Mass

ASTM E18 Superficial (HR15N, HR30N, HR15T, HR30T) ASTM E18 Vickers (10 kgf) ASTM E92 Microhardness Vickers (200, 300, 500 and 1000) gf Knoop (200, 300, 500) gf ASTM E384; ISO 15614-1 Metallograph

ASTM E18 Indirect Verification of Brinell Hardness Testers at Test Condition(s)3 – 10/500/15 10/3000/15 (50 to 70) HBW (80 to 101) HBW 239 HBW 349 HBW 416 HBW 2.5 HBW 3.7 HBW 8.4 HBW 13 HB

ASTM E18, ASTM A370 Coating Weight Aluminum on Steel Zinc on Steel ASTM A428/A428M ASTM A90/A90M, ASTM A917 (Section 8) Bend Test (Bend and Flatten) ASTM E290, ASTM A917 (Section 9) Surface Roughness using a Profilomet

ASTM E18, F606/F606M; EN 1043-1; EN 10109-1; EN ISO 6508; NASM 1312-6 Brinell (500, 1000, 1500 and 3000) kgf ASTM E10; DIN EN 10003-1; EN ISO 6506

ASTM E18 ____________________________________________ 1 This laboratory offers commercial calibration service and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertaint

ASTM E18 Scales & Balances3 Up to 400 g 400 g to 37 kg (37 to 136) kg 0.094 mg 0.082 g 0.032 % + 0.035 g Class F weights, Class S-1 weights, ASTM Class 1 weights Mass Up to 80 g (80 to 220) g 220 g to 3

ASTM E18 VI. Thermodynamics Parameter/Equipment Range CMC2, 11 (±) Comments Temperature – Measuring Instruments3 (-30 to 125) °C (50 to 420) °C (420 to 660) °C (50 to 420) °C (420 to 660) °C (-25 to 1

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 KIEH CORPORATION 747 Church Rd., Suite D4 Elmhurst, IL 60126 Lindsey Ruszkowski Phone: 708-544-8811 MECHANICAL Valid To: June 30, 2026 Certificate Number: 12

ASTM E18

ASTM E18

ASTM E18 Micro Hardness – Vickers (100gf and 500gf) Knoop (100gf and 500gf) ASTM E384, E92 Metallographic Sample Preparation ASTM E3 Micro-etching and Microstructure ASTM E407

ASTM E18 hardness blocks Hardness Testers – Brinell Indirect Verification at Test Conditions3 (200 to 600) HBW 4.1 % HBW ASTM E10 Equotip (Leeb) Testers3, 8 ≈ 800 Ld 17 Ld ASTM A956 Hardness Testers – Vi

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 INDUSTRIAL TESTING LABORATORY SERVICES (A DIVISION OF ALBA ENTERPRISES, LLC) 635 Alpha Drive – RIDC Park Pittsburgh, PA 15238 Steve Lysiak Phone: 412 963 1900 MECHANICAL Vali

ASTM E18

ASTM E18 __________________________________________________ 1 This laboratory offers commercial calibration service and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncert

ASTM E18 Hardness Brinell ASTM E110 Microhardness ASTM E384 Guided Bend Test ASTM E190 Bend Testing of Materials for Ductility ASTM E290 Vickers Hardness ASTM E92 Metallographic Preparation ASTM E3 Field Metal

ASTM E18, A370 Microhardness (Knoop and Vickers) (up to 500g) ASTM E384 Tensile ASTM A370, E8/E8M Charpy Impact ASTM E23 Metallographic Evaluation: Case Depth (Total and Effective) SAE J423 (Stabilized May 2023)

ASTM E18 Indirect Verification of Brinell Hardness Testers at Test Conditions 3 HBW 10/500/15 (HBW 217) HBW 10/1500/15 (HBW 186) HBW 10/3000/15 (HBW 230) 5.0 HBW 1.9 HBW 2.8 HBW Indirect ve

ASTM E18 using hardness test blocks Vickers Hardness Tester 3 (100 to 650) HV (650 to 940) HV 5 HV 2.5 HV Indirect Verification per ASTM E92 using hardness test blocks Mass Determination 1 g 100 g 200 g 500 g

ASTM E18, ASTM F606/F606M; ISO 898-1 Microhardness (Vickers HV 500 gf) ASTM E384 Case Depth SAE J423, Paragraphs 4.2 and 5.3 Decarburization ASTM F2328; ISO 898-1 Tensile (Proof, Axial, Wedge Tensile) ASTM F606/F606M,

ASTM E18 Microhardness Knoop (100) gf ASTM E384 Vickers (100, 300, 500) gf, ASTM C1327, ASTM E384 Failure Analysis ASM Handbook 11

ASTM E18 Pressure – Measure & Measuring Equipment3 (3 to 60) psi (> 60 to 270) psi (> 500 to 1000) psi (> 1000 to 5000) psi (> 5000 to 9000) psi 0.41 psi 0.82 psi 7.7 psi 22 psi 23 psi Master pressure gage

ASTM E18

ASTM E18 Indirect Verification of Rockwell & Rockwell Superficial Hardness Testers 3 – (cont) HR30TW: Low Medium High HR45TW: Low Medium High 1.9 HR30TW 2.0 HR30TW 1.8 HR30TW

ASTM E18, F606/F606M Average Grain Size (Comparison) ASTM E112 Microhardness (HK 0.1, 0.5; HV 0.1, 0.5) ASTM E92, E384 Fastener Tensile (Axial & Wedge) ASTM F606/F606M Inclusion Content ASTM E45 (Method A) SEM/EDS Analysis

ASTM E18, F606, F606M Microhardness (HV 300, 500g) (HK 300, 500g) ASTM B578, E384 Scanning Electron Microscopy (SEM) MM00051, ASTM B748 Tensile, Yield, Elongation, Reduction of Area ASTM A370, E8 (Room Temperature) LAP Shear AS

ASTM E18 Indirect Verification of Brinell Hardness Testers at Test Conditions 10/3000/15 (100 to 199) HBW 6.6 HBW Indirect comparis

ASTM E18