57 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM E384 testing. These labs commonly handle Metal, Fasteners matrices. Most frequently tested analytes via this method in United States: Hardness, Rockwell Hardness. From the accredited scope text: “ASTM E384, E92; NASM 1312-6; ISO 6507-1 Room Temperature Stress Rupture ASTM F519, E139, E292 Proof Load Tests External ASTM A370, F606/F606M; NASM 1312-8; ISO 898-1 Internal ASTM A962/A962M, F606/F60” “ASTM E384; MIL-STD-1312-6; NASM 1312-6 Proof Load of Full-Size Externally Threaded Fasteners ASTM A370, ASTM F606/F606M; ISO 898-1; MIL-STD-1312-8; NASM 1312-8; SAE J1216” “ASTM E384 Rockwell (A, B, C) ASTM A370, E18, F606/F606M Superficial Rockwell (15N, 30N, 15T, 30T) ASTM A370, E18, F606/F606M Metallographic Evaluation Preparation of Metallographic Specimens ASTM E3 C” “ASTM E384; ISO 15614-1 Metallographic Evaluation Sample Preparation ASTM E3 Case Depth SAE J423 Depth of Decarburization ASTM E1077 Grain Size ASTM E112 – Comparison Method only Macro-Etching ASTM E34”
Monee, IL, US
ASTM E384 pH Measurement ASTM E70 Phosphate Coating Weight Analysis MIL-DTL-16232G, Type Z, 4.7.3.2 Plating Thickness ASTM B568 Rockwell Hardness (A, B, C, 15N, 30N) ASTM E18 Salt Spray ASTM B117; ISO 9227 Torqu
Decatur, TX, US
ASTM E384; ASTM E92; ASTM E140; ARP 1820 Porosity AMS-QQ-C-320; AMS 2460; AMS 2438; ASTM B733; AMS-P-81728; MIS 41177 Salt Spray Corrosion ASTM B117 Solderability ASTM B678; QQ-S-365 Taber Abrasion ASTM D4060; ASTM B1023; F
Struthers, OH, US
ASTM E384 Rockwell (A, B, C, E, F, H, 15N, 15T, 30N, 30T, 45N, 45T) ASTM E18 Metallography Macroetching ASTM E381 Tensile Yield, Tensile, Reduction of Area, Elongation (Room temperature: 0 - 120,000 lb) ASTM A370, B557,
Whitehall, MI, US
ASTM E384 (100g, 300g, 500g) Carburization/Decarburization via the Chord Method ARP 1820 Room Temp. Tensile (up to 40 000 lb) ASTM E8/E8M, A370, B557 Elevated Temp. Tensile (up to 40 000 lb., up to 2050 °F) A
Hillsdale, MI, US
ASTM E384; AWS D8.9M 11.5.3; Ford BI 112-02 Pencil ASTM D3363; Honda HES D6501 3.5; ISO 15184 Impact Resistance Ball Drop GMW14093 Apparatus C Cold Slam FCA LP-463TB-09-01 Gardner Direct (Frontal) Indirect (Reverse) ASTM D2794;
Portland, OR, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 IMR TEST LABS - PORTLAND 5687-A SE International Way Portland, OR 97222 Juile Sheufelt Phone: (503) 653 2904 MECHANICAL Valid To: September 30, 2027 Certificate Numbe
Broken Arrow, OK, US
Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60
South Gate, CA, US
ASTM E384 Impact (Charpy, Izod) (-200 °F to 1800 °F) ASTM A370, E23 Creep / Creep Rupture / Stress Rupture ASTM E139 Notched Stress Rupture ASTM E292 Plane-Strain Fracture Toughness ASTM B645, E399, E1304 Stress Corrosion ASTM G38, G4
New Iberia, LA, US
ASTM E384; BS EN ISO 9015-1; ISO 6507-1 Impact, Charpy V-Notch (-321 to +212) °F ASTM A370, A923 (Method B), E23; BS EN ISO 9016; ISO 148-1 Nick – Break Testing API 1104 Metallography (Micro) Preparation Volume Fr
Oak Park, MI, US
ASTM E384 ASTM E384 Tensile, Elongation & Yield, Reduction of Area (Ambient Temperature) ASTM A370, E8/E8M Charpy Impact Testing ASTM E23 Grain Size ASTM E112 Microcleanliness ASTM E45, SAE J422 Micro-Etchin
Nicholasville, KY, US
ASTM E384 / E92 using Knoop & Vickers Test Blocks Mass – Class 53 (1 to 100) g (>100 to 1000) g (>1000 to 5000) g (>5000 to 30 000) g (0.11 + 0.0020Wt) mg (1.4 + 0.0026Wt) mg (6.1 + 0.0058Wt) mg (160 + 0.0087Wt) mg
Whitmore Lake, MI, US
ASTM E384; ISO 15614-1 Metallographic Evaluation Sample Preparation ASTM E3 Case Depth SAE J423 Depth of Decarburization ASTM E1077 Grain Size ASTM E112 – Comparison Method only Macro-Etching ASTM E340, E381;
Cleveland, OH, US
ASTM E384, E92; NASM 1312-6; ISO 6507-1 Room Temperature Stress Rupture ASTM F519, E139, E292 Proof Load Tests External ASTM A370, F606/F606M; NASM 1312-8; ISO 898-1 Internal ASTM A962/A962M, F606/F606M; EN 493; ISO 898-2, 10485;
Chicago, IL, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SCIENTIFIC CONTROL LABORATORIES, INC. 3158 South Kolin Avenue Chicago, IL 60623 Aishwarya Krishnamoorthy Phone: 773 254 2406 ext. 21 MECHANICAL Valid To: October 31,
Elmhurst, IL, US
ASTM E384 Tensile (Yield, Tensile, %Elongation, %RA) ASTM A370, E8/E8M Impact (V-notch) ASTM A370, E23 Weight of Coating ASTM A90/A90M Plastic Strain Ratio ( R ) ASTM E517 Strain Hardening Exponent (n) ASTM E646 Surface Discontinuity
Lakeside, CA, US
ASTM E384, E92 Metallographic Sample Preparation ASTM E3 Micro-etching and Microstructure ASTM E407
Pittsburgh, PA, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 INDUSTRIAL TESTING LABORATORY SERVICES (A DIVISION OF ALBA ENTERPRISES, LLC) 635 Alpha Drive – RIDC Park Pittsburgh, PA 15238 Steve Lysiak Phone: 412 963 1900 MECHANICAL Vali
Charlotte, NC, US
ASTM E384 Guided Bend Test ASTM E190 Bend Testing of Materials for Ductility ASTM E290 Vickers Hardness ASTM E92 Metallographic Preparation ASTM E3 Field Metallographic Replicas ASTM E1351 Microetching ASTM E407
Clintonville, WI, US
ASTM E384 Tensile ASTM A370, E8/E8M Charpy Impact ASTM E23 Metallographic Evaluation: Case Depth (Total and Effective) SAE J423 (Stabilized May 2023) Depth of Decarburization ASTM E1077 Grain Size (Com
Hartland, WI, US
ASTM E384 Torque Wrenches3 (5 to 250) lbf·in (0.15 + 2.3 %) lbf·in Torque calibrator Pressure/Vacuum Gauges3 (-14 to 30) psig (30 to 500) psig (0.0089 + 0.014 %) psi (0.15 + 0.0047 %) psi Pressur
Elroy, WI, US
ASTM E384 Case Depth SAE J423, Paragraphs 4.2 and 5.3 Decarburization ASTM F2328; ISO 898-1 Tensile (Proof, Axial, Wedge Tensile) ASTM F606/F606M, ASTM F568M (withdrawn 2012); ISO 898-1 Plating Thickness (X-Ray Fluoresc
Hilton Head Island, SC, US
ASTM E384 Vickers (100, 300, 500) gf, ASTM C1327, ASTM E384 Failure Analysis ASM Handbook 11
Allentown, PA, US
ASTM E384 Rockwell Hardness (HRA, HRB, HRC) (15N) ASTM E18
Largo, FL, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CONSTELLATION TECHNOLOGY CORPORATION 7887 Bryan Dairy Road, Suite 100 Largo, FL 33777-1498 Donna Swartz Phone: 727 547 0600 MECHANICAL Valid To: December 31, 2026
Milwaukee, WI, US
ASTM E384
Columbus, OH, US
ASTM E384
Erie, PA, US
ASTM E384, E92 Vickers (100g, 500g, 1000g) Microstructure ASTM E1268; ASM Metals Handbook, Volume 9 Microstructure in Cast Iron Graphite ASTM A247 Weld Operator and Procedure Qualification Testing (Tensile and Charpy Only) ASME Sec I
Round Rock, TX, US
ASTM E384 Tensile Testing ASTM A370, ASTM E8/E8M 1 When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current version for a per
Bohemia, NY, US
ASTM E384
Huntington Beach, CA, US
ASTM E384; MIL-STD-1312-6; NASM 1312-6 Proof Load of Full-Size Externally Threaded Fasteners ASTM A370, ASTM F606/F606M; ISO 898-1; MIL-STD-1312-8; NASM 1312-8; SAE J1216
Edmond, OK, US
ASTM E384 with ASTM E92
Euless, TX, US
Test Test Method(s) Corrosion Testing Intergranular Attack in Austenitic Stainless Steels ASTM A262 (Practices A, B, E, and F) Intergranular Attack in Ferritic Stainless Steels ASTM A763 (Practices W, X, and Y) Intergranular Attac
Gary, IN, US
ASTM E384 Macrohardness Vickers (5, 10 kgf) ASTM E92 Charpy Impact ASTM E23; BS EN ISO 148-1 Nil Ductility Transition (Drop Weight) ASTM E208 Olsen Ductility ASTM E643 Drop Weight Tear ASTM E436 Dynamic Tear ASTM E604 Jominy Hardena
Kentwood, MI, US
ASTM E384
Birmingham, AL, US
ASTM E384 Room Temperature Tensile Test (Machined) (≤ 390 klbf) ASTM A370, B557, E8/E8M Axial, Wedge Tensile Test ASTM A370, F606/F606M Proof Load (Internal & External Threads, Fasteners) ASTM F606/F606M Discontinuities ASTM F
Richardson, TX, US
ASTM E384 Rockwell (HRBW, HRC, HR15N, HR30N, HR15TW, HR30TW) ASTM E18 Concrete Agencies Engaged in Construction Inspection, Testing, or Special Inspection ASTM E329 Compression/Flexural Strength of Concrete Compressive Streng
Winona, MN, US
ASTM E384 Proof (External Threaded) Bolts ASTM A370 (A3.2.1.2), F606/F606M (3.2.3); ISO 898-1 (8.4) Nuts ASTM A370 (A3.5.1), F606/F606M (4.2); ISO 898-2 (8.1); ASME SA370 Rotational Capacity ASTM F3125/F3125M Shear Testi
Davenport, IA, US
ASTM E384 Plating Thickness ASTM B487 Macroetch ASTM E381 Microstructure Analysis ASTM E883 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy (EDS, SEM) ASTM E1508 (Standardless Technique)
Waukesha, WI, US
ASTM E384, E1077; F2328, SAE J121, J419 Macroetch ASTM E340, AWS D1.1/D1.1M (6.4.10 and 6.23.2), AWS D1.5/D1.5M (7.18.2 and 7.26.3.4) Microetch ASTM E407 Case Depth (Optical, microhardness) ASTM E384; SAE J423 Inclusion Conten t ASTM
Carol Stream, IL, US
ASTM E384; SAE J81, J933, J1237 Fastener Tensile up to 30,000 lbf Axial Wedge Proof Load ASTM F606/F606M; SAE J81, J82, J1216, J1237 ASTM F606/F606M; SAE J81, J82, J1216 ASTM F606/F606M (3.2.3, 3.2.5) ISO 898-1
Tipp City, OH, US
ASTM E384 SEM (Scanning Electron Microscopy)/EDS (Energy Dispersive Spectroscopy) ASTM E1508 Inclusion Content ASTM E45 (Method A) Determining Average Grain Size ASTM E112 (Comparison and Intercept), E1181 Volume Fraction of Delta Fe
Elk Grove Village, IL, US
ASTM E384, GM 6010M (Section 3.2) (superseded 8/2011)2, GM 6170M (Section 3.2) (superseded 8/2011)2, GM 6171M (Section 3.2) (superseded 8/2011)2, GMW15170, ISO 898-1, ISO 2702, SAE J419 Torsional Strength GM 6010M (Section 3.5) (s
Windsor Locks, CT, US
ASTM E384, E92 Durometer (Shore A & D) ASTM D2240 Surface Roughness (Linear) ANSI B46.1 Density/Specific Gravity of Plastics ASTM D792 Metallographic Preperation ASTM E3, E407 Metallographic Evaluation ASM Handboo
Suite E Addison, IL, US
ASTM E384/ ASTM E92/ISO 6507-2
Wichita, KS, US
ASTM E384 & E92 Pressure3 – Absolute & Barometric Pressure Differential & Gage Pressure (0 to 35) inꞏHg (0 to 30) inꞏH 2O (0 to 5) psi (5 to 15) psi (10 to 500) psi (200 to 10 000) psi
Troutdale, OR, US
ASTM E384; SAE J423 Micro-indentation Testing (Vickers, Knoop) 500HK 100HV ASTM E384, E92 Hardness Rockwell and Superficial (HR15N, HR15TW, HRBW, HRA, HRC, HREW) ASTM E18 Metallography Sample Prep ASTM E3 Microstructure
Phoenix, AZ, US
ASTM E384; F606/606M MacroetchTesting ASTM E381; ASTM A604 Measurements of plating thickness by Optical Microscope ASTM B487 Micro-Cleanliness Rating ASTM E45 (Method A, C, D, E); ISO 4967 (Method A and B); DIN 50602 (Method
Cincinnati, OH, US
ASTM E384/E92 Vickers (100, 300, 500 gf) ASTM E384/E92 Met. Preparation & Evaluation ASTM E3; GE: P29TF25 Macroetching/Microetching ASTM E340, E381, E407 Grain Size ASTM E112, E1181, E930; GE: E50TF133 Depth of Decar
Casselberry, FL, US
ASTM E384 Metallographic Preparation ASTM E3 Microetching ASTM E407 Grain Size ASTM E112 Fatigue Crack Growth ASTM E647
Rancho Cucamonga, CA, US
ASTM E384 Brinell ASTM E10 Fastener Testing Wedge and Axial Tensile ASTM A370, F606/606M Axial Proof Load (Internal and External Threads) ASTM A370, A962, F606/606M Yield Strength ASTM A370, F606/606M, E8/E8M Chemical Prope
Showing labs 1–50 of 57. Use pagination below to see more.
This page is a fixed slice of the register: every ASTM E384 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.