54 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM A370 testing. These labs commonly handle Metal, Fasteners, Steel matrices. Most frequently tested analytes via this method in United States: Hardness. From the accredited scope text: “ASTM A370 Mechanical Testing of Steel Products ( except Impact): Tension, Bend, Brinell Hardness, Rockwell Hardness ASTM B117 Salt S pray (Fog) Apparatus Operation: Corrosion Resistance, Salt Fog Test” “ASTM A370, F606/F606M; NASM 1312-8; ISO 898-1 Internal ASTM A962/A962M, F606/F606M; EN 493; ISO 898-2, 10485; SAE J1216; GM510M (Section 6.1) (2011); DIN 267-4; IFI 100/107 Axial and Cone ASTM F606/F6” “ASTM A370, B557, E8/E8M, F606/F606M (Sec. 3.6), A536; AWS D1.1/D1.1M (Sec. 6.10.3), D1.2/D1.2M (Sec. 3.7); CSA W47.1 (Sec. 11.7) Visual Examination ASME Sec. IX (Sec. QW-194); ASM Handbook 11, 12 (Pag” “ASTM A370, F606/F606M; SAE J429, J995 Charpy, V-notch Impact ASTM A370, E23 Bend Test ASTM A370, E190, E290 Flattening ASTM A370, API 1104 Nick Break API 1104; AWS B4.0 Welder and Welding Procedure Qu”
Euless, TX, US
ASTM A370, ASTM E23 Compression Testing ASTM E9 Fatigue Testing (+58 to +350) ºF, (1 to 50) Hz ASTM E466; NASM 1312-11 Hydrogen Embrittlement (Notch Tension) ASTM E292, ASTM F519; NASM 1312-5, -14 Jominy End-Quench ASTM A2
Struthers, OH, US
ASTM A370, B557, E8/E8M Chemical Spark Atomic Emission Spectrometry – Steel, Stainless Steel, Aluminum and Cast-Iron Alloys Al, B, Bi, C, Ca, Co, Cr, Cu, Fe, Mg, Mn, Mo, Nb, Ni, P, Pb, S, Si, Sn, Ti, V, W, Zn, Zr ASTM E415, E10
Portland, OR, US
ASTM A370, E23 Creep ASTM E139 Density ASTM B311 Ductility (Bend) ASTM A370, E190, E290 (Guided, Semi Guided: B, C), ASME BPVC.IX Hardness Brinell (3000) kg ASTM A370, E10 Rockwell (A, B, C, E, F, 15N, 30N, 45N, 15T, 3
Broken Arrow, OK, US
ASTM A370 (Sections 6-14), A770/770M, A1034/1034M 1, B557/B557M, E8/E8M, E111; ISO 4136, 6892-1 Bend API 1104; ASME Section IX; ASTM A6/A6M, A370 (Section 15), E190, E290; AWS D1.1/D1.1M, D1.5/D1.5M, D17.1/D17.1M, B2.1/B2.1M; EN91
Grand Rapids, MI, US
ASTM A370 (Section 15), B571 (Para 3) Chemical Optical Emission Spectroscopy (CS, SS) (Al, B, C, Co, Cr, Cu, Mn, Mo, N, Nb, Ni, P, Pb, S, Si, Ti, Va, W) ASTM E415, E1086 Coating Weight ASTM A90/A90M, A428/A428M, A924/A924M Corrosi
Houston, TX, US
ASTM A370, E23 Hardness – Brinell (3,000 lbf) ASTM A370, E10 Hardness – Rockwell (Scales B & C) ASTM A370, E18 Microhardness – Knoop / Vickers (100 g, 500 g, 5 kg, 10 kg) ASTM E92, E384 Chemistry Analysis (OES) ASTM A751 Ring Flattenin
South Gate, CA, US
ASTM A370, B557, E8/E8M High Temperature (Up to 2000 ºF) ASTM E21 Compression ASTM E9 Shear MIL-STD-1312-13 Bend Test ASTM E190, E290 Hardness: Rockwell & Superficial (B, C, E, 15T, 30T, 45T) ASTM A370, E18 B
New Iberia, LA, US
ASTM A370, A770/A770M, E8/E8M; ABS Rules; ASME Section IX; API 1104, 5CT, 5L; AWS D1.1/D1.1M, D1.2/D1.2M, D1.5/D1.5M, D1.6/D1.6M; BS EN ISO 6892-1, 5178, 4136; CSA W47.1; DNV Rules Visual Inspection AWS D1.1/D1.1M, D1.2/D1
Cleveland, OH, US
ASTM A370 (A4.7) Evaluation of the Degree of Blistering of Paints ASTM D714 Stress Rupture (Up to 1500) °F w/ Smooth, Notch and Combination (Combo) Bars ASTM E139, E292; ISO 204; NASM 1312-14 Tensile: Room Temperature
Ithaca, NY, US
ASTM A370 Mechanical Testing of Steel Products ( except Impact): Tension, Bend, Brinell Hardness, Rockwell Hardness ASTM B117 Salt S pray (Fog) Apparatus Operation: Corrosion Resistance, Salt Fog Test ASTM B244 Coatin g Thickness (Dry
Oak Park, MI, US
ASTM A370, E18 ASTM A370, E10 ASTM A255 Microhardness Knoop (100g to 1kg HK) Vickers (100g to 1kg HV) ASTM E384 ASTM E384 Tensile, Elongation & Yield, Reduction of Area (Ambient Temperature) ASTM A370, E8/E8M Charpy Imp
Whitmore Lake, MI, US
ASTM A370, B557/B557M, E8/E8M; AWS D1.1/D1.1M (sec. 6.10.3.4 and 6.10.3.6), D1.2/D1.2M (sec. 3.7), D15.1/D15.M (Sec. 10.9.1), D17.1/D17.1M (sec. 5.2.2.2), B4.0 (sec. 4); ISO 15614-1 Impact Charpy at Controlled Temperatures
Auburn Hills, MI, US
ASTM A370, E8 Impact Resistance* LP-463PB-19-01 Terminal Crimp Evaluation* USCAR21 Fluid Resistance* LP-463PB-31-01 (2007); GMW 3431; CEPT:00:00-E-412; CS-11982; ISO 16750-5; Chrysler PF-9688; Chrysler PF-11235
Taylor, MI, US
ASTM A370 (Sections 6-14), ASTM B557; JIS Z2241; ISO 6892-1; GMW 3335 Plastic Strain Ratio (r-value) ASTM E517; JIS Z2254; ISO 10113 Work Hardening Exponent (n-value) ASTM E646; JIS Z2253; ISO 10275 Rockwell Hardness (HRBW, HR
Cleveland, OH, US
ASTM A370, F606/F606M; NASM 1312-8; ISO 898-1 Internal ASTM A962/A962M, F606/F606M; EN 493; ISO 898-2, 10485; SAE J1216; GM510M (Section 6.1) (2011); DIN 267-4; IFI 100/107 Axial and Cone ASTM F606/F606M; GM 510M; SAE J122, J1965
Elmhurst, IL, US
ASTM A370, E18 ASTM E384 Tensile (Yield, Tensile, %Elongation, %RA) ASTM A370, E8/E8M Impact (V-notch) ASTM A370, E23 Weight of Coating ASTM A90/A90M Plastic Strain Ratio ( R ) ASTM E517 Strain Hardening Exponent (n) ASTM E646 Surfa
Lakeside, CA, US
Test Technology: Test Method(s): Decarburization/ Carburization ASTM E1077, F2328; SAE J121, J419 Case Depth ISO 4507; SAE J423 Plating Thickness by Microscopic Examination ASTM B487/B487M; NASM 1312-12 Tensile Test (UTS, YS, % EI, %
Pittsburgh, PA, US
ASTM A370, E190, E290; AWS D1.1, D1.6 Fastener Testing Tensile (Wedge/Axial) Proof (Internal & External Threads) ASTM F606/F606M; NASM 1312-8 ASTM F606/F606M; NASM 1312-8 Stress Durability (Hydrogen embrittlement)
Charlotte, NC, US
ASTM A370, B557, E8, E21 Creep and Stress Rupture Testing ASTM E139 Portable Hardness Testing Impedance Leeb ASTM A1038 ASTM A956 Hardness, Rockwell B, C, Superficial ASTM E18 Hardness Brinell ASTM E110 Microhardn
Clintonville, WI, US
ASTM A370, E8/E8M Charpy Impact ASTM E23 Metallographic Evaluation: Case Depth (Total and Effective) SAE J423 (Stabilized May 2023) Depth of Decarburization ASTM E1077 Grain Size (Comparison Method) ASTM E1
Saukville, WI, US
ASTM A370, E18 Metallographic Evaluation Grain Size (Comparison Method) Macroetching ASTM E112 ASTM E381
Allentown, PA, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 WTTI 1144 N. Graham Street Allentown, PA 18109 Tracy Wiswesser Phone: (610) 820 - 9551 tracy@wtti.com http://www.wtti.com MECHANICAL Valid To: March 31, 2027 Certifica
West Boylston, MA, US
ASTM A370, E290, E190; ASME Section IX; AWS B4.0, D1.1, D1.2, D1.5, D17.1 Charpy Impact (-320oF to Room Temperature) ASTM E23; EN 10045-1 Specimen Heat Treatment 2000F TP-132 Tensile (Room Temperature ≤ 60 klbs) ASTM A48, A370,
Saint Louis, MO, US
ASTM A370, E8/E8M Brinell Hardness (500, 3000kg) ASTM E10 Rockwell Hardness (B, C, 30N, 30T) ASTM E18, F606/F606M Average Grain Size (Comparison) ASTM E112 Microhardness (HK 0.1, 0.5; HV 0.1, 0.5) ASTM E92, E384 Fastener Te
Largo, FL, US
ASTM A370, E8 (Room Temperature) LAP Shear ASTM D1002 Plating Thickness ASTM B487, B748 Passivation of Stainless Steel, Copper Sulfate Test ASTM A380 (Paragraph 7.2.5.3) Metallographic Evaluation Grain Size (Comparison) ASTM E112
Alsip, IL, US
ASTM A370 (Sections 16 & 17), E10 ASTM A370 (Section 18), E18 Tension (300,000 lbs max, 1.500” Dia. Max) Axial Testing Full-Size Product Proof Load Test (External Threads) Wedge Testing of Full-Size
Erie, PA, US
ASTM A370, E23; AWS D1.5/D1.5M Tensile Ambient Temperature ASTM A370, E8/E8M Metallographic Evaluation: Preparation ASTM E3 Decarburization ASTM E1077; SAE J121 Case Depth SAE J423 Ferrite Rating AMS 2315; ASTM E562 Grain Size (C
Round Rock, TX, US
ASTM A370, ASTM E23 Hardness Brinell (3000 kg) Rockwell (HRA, HRB, HRC, 15N) ASTM E10 ASTM E18 Microhardness Knoop (HK 0.5) Vickers (HV 0.1, HV 0.5, HV 1.0) ASTM E384 Tensile Testing ASTM
Huntington Beach, CA, US
ASTM A370, ASTM F606/F606M; ISO 898-2, ISO 898-6; SAE J995, SAE J1216 Push-Out Test of Floating Plate Nuts, Gang Channel Nuts and Anchor Nuts NASM 25027 Recess Strength Test in Both Installation and Removal Directions MIL-STD-1312-2
Euless, TX, US
ASTM A370, F606/F606M; SAE J429, J995 Charpy, V-notch Impact ASTM A370, E23 Bend Test ASTM A370, E190, E290 Flattening ASTM A370, API 1104 Nick Break API 1104; AWS B4.0 Welder and Welding Procedure Qualification Testing API STD 1
Gary, IN, US
ASTM A370, E8/E8M Formability (N Value) ASTM E646 Drawability (R Value) ASTM E517 Bend ASTM A370, E290 Hardness Rockwell (A, B, C, 15N, 30N, 15T, 30T, F, E) Brinell (10/3000, 10/500, 10/1500, 5/750) ASTM E18; SAE J429, J995 ASTM E10
Portland, OR, US
ASTM A370, E290; AWS D1.1/D1.M, D1.2/D1.2M, D1.3/D1.3M, D1.5M/D1.5, D1.6/D1.6M, D1.9/D1.9M, D4.1/D14.1M, ASME Section IX Impact (264 ft-lb. max, -50°F to room temperature) ASTM A370, E23; AWS D1.1/D1.M, D1.2/D1.2M, D1.3/D1.3M, D1.5
Birmingham, AL, US
ASTM A370, B557, E8/E8M Axial, Wedge Tensile Test ASTM A370, F606/F606M Proof Load (Internal & External Threads, Fasteners) ASTM F606/F606M Discontinuities ASTM F788/F788M, F812/F812M; SAE J122, J123 (Superseded Jan 2017, Apr 201
Richardson, TX, US
ASTM A370, B557, D412, D638, E8/E8M, E21 Compression Testing of Metallic Materials at Room Temperature ASTM E9 Flexural Properties of Reinforced Polymers ASTM D790 Tensile Properties of Polymer Matrix Composite Materials ASTM D3039 Com
Winona, MN, US
ASTM A370, E18, F606/F606M; ISO 898-1, 898-2, 898-5; NASM 1312-6; ASME SA370 ASTM E10 ASTM A956/A956M Hex Socket Strength ASTM F880, F880M (2017), F912, F912M (2017); ISO 898-5, 3506-3 Microhardness (Vickers) (300 & 500 gf
Davenport, IA, US
ASTM A370, E8/E8M, F606/F606M Charpy Impact (-90oF to Room Temp.), (10 to 300) ft-lbs ASTM A370, E23 Guided Bend Test for Ductility of Welds ASTM E190; ASME Section IX; AWS D1.1/1.1M (Clause 6, Qualifications) Weld Operator & Procedure
Tipp City, OH, US
ASTM A370, F606/F606M; ISO 898-1 Wedge Tensile ASTM A370, F606/F606M; ISO 898-1, Proof Load ASTM F606/F606M; SAE J1965, ISO 898-1, 898-2 Hardness ASTM F606/F606M; ISO 898-1, 898-2, 898-5
Crystal Lake, IL, US
ASTM A370 (Section 18), E18 ASTM A370 (Section 17), E10 Tension ASTM A370 (Sections 6-14), E8/E8M, F606/F606M (Section 3.6) Metallographic Evaluation MET Preparation Depth of Decarburization Microstructure Analysis ASTM E
Troutdale, OR, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 OREGON METALLURGY LLC dba ON-TIME LABS 911 NW Eastwind Drive Troutdale, OR 97060 Mr. Joseph McBride Phone: 971 284 0148 MECHANICAL Valid To: May 31, 2026 Certificate N
Phoenix, AZ, US
ASTM A370 Sec. 15, ASTM E290 Guided Bend, Semi- Guided Bend; AWS B4.0 (Part A) Case Depth SAE J423 Charpy Impact Testing (Type A) ASTM E23; ISO 148-1; JIS Z 2202, JIS Z 2242 Coating Weight (Zn) ASTM A90 Decarburization Exa
Nappanee, IN, US
ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Only Sections 6 to 14) ASTM C36/C36M Standard specification for gypsum wallboard ASTM C67 Standard Test Methods for Sampling and Testing Brick
Arlington, TX, US
ASTM A370, E8/E8M, F606/F606M Proof Load, Internally Threaded Fasteners ASTM A370, F606/F606M Proof Load, Externally Threaded Fasteners ASTM A370, F606/F606M Torque Testing Torque-Tension IFI 101,100/107 (Withdrawn 2007); ASME B18.16.6
Rancho Cucamonga, CA, US
ASTM A370, E23 Stress Rupture ASTM E139 Hardness Rockwell (HRBW, HRC) ASTM A370, E18, F606/F606M Microhardness (HV0.3, HV0.5) ASTM E384 Brinell ASTM E10 Fastener Testing Wedge and Axial Tensile ASTM A370, F606/606M Axial
Humble, TX, US
ASTM A370 Section(s) 7-14, B557/B557M, E8/E8M; API 934-A, 943-E; ASME BPVC Section VIII Div. 1 Section(s) UW- 11, UW-51, UW-52, UCS-57, ASME BPVC Section VIII Div. 2 Art. 2 ASME SA370 Section(s) 7-14, ASME BPVC Sect. IX, Art. 1; AWS
Chicago, IL, US
ASTM A370, E8/E8M Hardness Rockwell B, C ASTM E18 Brinell (3000Kg, 10 mm Ball) ASTM E10 Macro Vickers HV10 ASTM E92 Charpy V Notch (Room Temperature to -100°F) 40
Lynnwood, WA, US
ASTM A370, Section A9 (Tensile only) Tension Testing ASTM A615/A615M (Sections 7, 8, 9, 11, & 12) Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement ASTM D3039/D3039M Tensile Properties of Polymer Matrix Composite Materials
St. Paul, MN, US
ASTM A370, A489, A673/A673M, E23; AWS D1.5/D1.5M; DTW 766; ISO 148-1 Mechanical and Material Requirements for Externally Threaded Fastener SAE J4292 Mechanical and Material Requirements for Metric Externally Threaded Steel Fasten
Saukville, WI, US
ASTM A370, E8/8M Rockwell Hardness Testing (B and C Scales) ASTM E18 Metallographic Evaluation: Decarburization Grain Size (Comparison Method) Inclusion Content (Methods A and E) Microstructure ASTM E1
Sauk Rapids, MN, US
ASTM A370, B557, E8/E8M, F606/F606M (Sec. 3.6), A536; AWS D1.1/D1.1M (Sec. 6.10.3), D1.2/D1.2M (Sec. 3.7); CSA W47.1 (Sec. 11.7) Visual Examination ASME Sec. IX (Sec. QW-194); ASM Handbook 11, 12 (Pages 91-165); AWS D1.1/D1.1M (Se
Dayton, OH, US
ASTM A370, E8/8M, B557 r-Value ASTM E517 n-Value ASTM E646 Fastener Tensile (Axial – Load to 60,000 lbs) ASTM F606/F606M Bond Strength of Thermal Spray Coatings ASTM C633 Bend Test ASTM E190, E290 Coating Mass ASTM A90
Showing labs 1–50 of 54. Use pagination below to see more.
This page is a fixed slice of the register: every ASTM A370 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.