ASTM E18 Accredited Testing Labs in United States

ASTM E18 & test blocks Vickers Hardness Testers3 < 402 HV (403 to 694) HV > 694 HV 12 HV 8.6 HV 14 HV Indirect verification per ASTM E92 & test blocks

ASTM E18

ASTM E18 Indirect Verification of Brinell Hardness Testers3 HBW 10/3000/15 239 HBW 290 HBW 528 HBW 4.5 HBW 4.5 HBW 6 HBW Indirect verification per ASTM E10, ASTM E110 Mass - Fixed Points

ASTM E18

ASTM E18 V. Thermodynamics Parameter/Equipment Range CMC2, 5, 8 (±) Comments Infrared Temperature Indicators 3 (Optical Pyrometers) @ 35 °C (35 to 100) °C (100 to 200) °C (200 to 350) °C (350 to 500) °C

ASTM E18 Calibration of Force Gages, Load Cells, Dynamometers & Cable Tensiometers 3 Up to 200 lbf (0 to 500) lbf (0 to 1000) lbf (0 to 10 000) lbf 0.02 % + 0.6R 0.32 lbf + 0.6R 0.94 lbf + 0.6R

ASTM E18 ___________________________________________ 1 This laboratory offers commercial and field calibration services. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a la

ASTM E1820; BSI 7448; ISO 12135, ISO 15653 Nick-Break Test AWS B4.0 Hardness Rockwell (B, C) Vickers Macro Hardness (10 kg) ASTM E18, ASTM E140 ASTM E92 Vickers Micro Hardness (100, 200,

ASTM E18

ASTM E18, test blocks Indirect Verification of Rockwell Superficial Hardness Testers 3 HR15N: Low Medium High HR30N: Low Medium High HR15TW: Low Medium High HR30TW: Low Medium High 0.47 HR15N 0.50 HR1

ASTM E18 Impact (Charpy) -320°F to Ambient ASTM A370, E23; AWS D1.5/D1.5M Tensile Ambient Temperature ASTM A370, E8/E8M Metallographic Evaluation: Preparation ASTM E3 Decarburization ASTM E1077; SAE J121 Case Depth SAE J423 Ferri

ASTM E18

ASTM E18 Microhardness Knoop (HK 0.5) Vickers (HV 0.1, HV 0.5, HV 1.0) ASTM E384 Tensile Testing ASTM A370, ASTM E8/E8M 1 When the date, edition, version, etc. is not identified in the scope of accredit

ASTM E18 ICP-OES (High Purity Alumina Compositions) CTAL-60-ICP-01 ICP-OES (Zirconia Compositions) CTAL-60-ICP-02 XRF (Alumina Compositions) CTAL-50-XRF-01 XRF (Zirconia Compositions) CTAL-50-XRF-03 BET (Surface Area) ASTM C1274 Knoop

ASTM E18 Microhardness ASTM E384

ASTM E18, ASTM E140, ASTM F606/F606M; ISO 898-1, ISO 3738-1, ISO 6508-1; MIL-STD-1312-6; NASM 1312-6; SAE J1199 Vickers (1 to 30) kg ASTM E92; ISO 6507-1 Corrosion Testing Alternate Immersion Stress Corrosion ASTM G38, ASTM G44, A

ASTM E18 Indirect Verification of Brinell Hardness Testers3 HBW 10/3000 < 196 HBW (196 to 650) HRMW 2.1 HBW 2.7 HBW Indirect verification per ASTM E10 Indirect Verification of Vickers Hardness

ASTM E18 Helmets Motorcycle Helmets DOT FMVSS 218; 49 CFR 571.218 Section 7.1 Mass per Unit Area (Weight) of Woven Fabric ASTM D3776, Option C Thickness of Textile Materials ASTM D1777 Aviation Helmet Standard DOI/USFS – Ver 4.3 (

ASTM E18; NACE MR0175/ISO 15156 Rockwell (A, B, C, E, F) ASTM E18; SAE J417; NACE MR0175/ISO 15156 Brinell (500 kgf, 1500 kgf, 3000 kgf) ASTM E110; SAE J417 Knoop/Micro Vickers (200 gf, 500 gf) ASTM B578, E384; SAE ARP 1820, J417 Vick

ASTM E18; SAE J429, J995 ASTM E10 Microhardness Knoop, Vickers (50, 100, 200, 300, 500 gf), (1 kgf) ASTM E384 Macrohardness Vickers (5, 10 kgf) ASTM E92 Charpy Impact ASTM E23; BS EN ISO 148-1 Nil Ductility Transition (Drop Weight) A

ASTM E18 Saw Grind ASTM B571 (Section 8) Tensile/Yield/Elongation ASTM E8; ISO 6892-1; EG-812-22612-204 Weld Evaluation GM 4488M, 6122M 4; Chrysler PS 9472; GMW14058 Glass Abrasion Resistance ATPD 2352, 3.3.6, 4.3.6; ANSI

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 North Cutter Circle, Suite #480 Portland, OR 97217 Bethina Barboza Wilb Phone: 503 961 9518 MECHAN

ASTM E18 Brinell Hardness (500 kg and 3000 kg) ASTM E10 Microhardness (HV0.3, HV0.5, HV1) ASTM E384 Room Temperature Tensile Test (Machined) (≤ 390 klbf) ASTM A370, B557, E8/E8M Axial, Wedge Tensile Test ASTM A370, F606/F606M

ASTM E18 Speed – Measure 3 Optic/Non-Contact: RPM Totalizer/Rate Meters Contact: RPM Totalizer/Rate Meters (5 to 200 000) rpm (2 to 3300) fpm (0.5 to 12 000) rpm (2 to

ASTM E18

ASTM E18 Concrete Agencies Engaged in Construction Inspection, Testing, or Special Inspection ASTM E329 Compression/Flexural Strength of Concrete Compressive Strength of Cylindrical Concrete Specimens ASTM C39/C39M Flexural S

SATELLITE 15009 Lee Rd. Houston, TX 77032 Test Hardness Test Methods Rockwell (B, C) Hardness Sorting by Eddy Current XRF PMI Analysis ASTM A370, E18, F606/F606M ASTM E566 (Comparative Coil Method)

ASTM E18 Brinell Hardness (3000 kg) ASTM E10 Plastic Strain Ratio (r Value) ASTM E517 Proof (External Threaded) ASTM F606/F606M Strain Hardening Exponent (n Value) ASTM E646 Tension (Complete, Axial <= 60 klbs at Room Temp.) ASTM A370,

ASTM E18 Brinell (500 kgf and 3000 kgf) ASTM E10 Leeb Hardness ASTM A956 Microhardness (Vickers, Knoop) (100gf, 200gf and 500gf) ASTM B578, E384 Metallographic evaluation Preparation ASTM B665, E3 Light Microscopy ASTM E883 Gr

ASTM E18, F606-F606M; ISO 898-1; SAE J81, J82, J933, J1216, J1237, J429 Microhardness (Knoop: HK0.5, Vickers: HV 0.3, 0.5, &1) Case (Hardness & Depth) ASTM E384; SAE J81, J933, J1237 Fastener Tensile up to 30,000 lbf Axial

ASTM E18 Tensile / Yield / %E ASTM E8/E8M, ASTM F606/F606M Torque Twist-off Testing Ford WE963; ESBM5A-1N265-AA; FCA PF-90346, PS50004 Push Out/Pull Out Ford WE963; ESBM5A-1N265-AA; FCA PF-90346, PS50004 Prevailing Torque Ford WE

ASTM E18, A370 Brinell (500 & 3000) Kg ASTM E10 Microindentation Knoop (100, 300 and 500) g ASTM E384, E92 Vickers (100, 300 and 500) g ASTM E384, E92 Tensile: Grey Iron Tensile Testing ASTM A48/A48M Mechanical Testing of Steel Pr

ASTM E18, F606/F606M, GM 6010M (Section 3.1) (superseded 8/2011)2, GM 6170M (Section 3.1) (superseded 8/2011)2, GM 6171M (Section 3.1) (superseded 8/2011)2, GMW15170, ISO 898-1, ISO 2702 Microhardness (Knoop 500 gf, Vickers 300 gf

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TC INDUSTRIES TEST CENTER 3703 S. Route 31 Crystal Lake, IL 60012 Ken Rueff Phone: 815 333 8343 MECHANICAL Valid To: February 28, 2027 Certificate Number: 1281.01 In re

ASTM E18

ASTM E18-05, A370 Microhardness of Materials (HV 100 & 300g) ASTM E384, E92 Durometer (Shore A & D) ASTM D2240 Surface Roughness (Linear) ANSI B46.1 Density/Specific Gravity of Plastics ASTM D792 Metallographic Prepe

ASTM E18 Load cells ASTM E74 Length gauge Stopwatch Direct Verification of Micro Hardness Testers 3– Verification of Test Force Verification of Indentation Measuring System Verification of Testing Cycle Verifi

ASTM E18

ASTM E18 Direct Verification of Rockwell Hardness Testers 3 – Verification of Test Force Verification of Depth-Measuring Device Verification of Hysteresis (3 to 15) kgf (30 to 150) kgf (0 to 260) µm

ASTM E18 Metallography Sample Prep ASTM E3 Microstructure ASTM E407 Decarburization ASTM E1077 Grain Size ASTM E112

ASTM E18; ASTM F606/606M; SAE J429; ASTM E10; ASTM E92; ISO 6507-1 Microhardness Knoop: 100, 200, 300, 500 gf Vickers: 100, 200, 300, 500, 1000 gf ASTM E384; F606/606M MacroetchTesting ASTM E381; ASTM A604 Me

ASTM E18 Inclusion Content ASTM E45 (Method A) Microhardness Knoop (500 gf) ASTM E384/E92 Vickers (100, 300, 500 gf) ASTM E384/E92 Met. Preparation & Evaluation ASTM E3; GE: P29TF25 Macroetching/Microetching A

ASTM E18

ASTM E18 Hardness, Brinell ASTM E10 Microhardness ASTM E384 Metallographic Preparation ASTM E3 Microetching ASTM E407 Grain Size ASTM E112 Fatigue Crack Growth ASTM E647

Parameter/Equipment Range CMC2 (±) Comments Rockwell Hardness Testers3, Indirect Verification (cont) HR15TW: Low Middle High HR30TW: Low Middle High HRRW 0.78 HR15TW 0.78 HR15TW 0.72 HR15TW

ASTM E18 Rockwell Hardness of Metallic Materials ASTM E10 Brinell Hardness of Metallic Materials ASTM E8 Tension Testing of Metallic Materials ASTM E21 Elevated Temperature Tension Tests of Metallic Materials ASTM E23 Notched Bar Impact

ASTM E18, F606/F606M Brinell (HBW) (3000 kg) ASTM E10 Rockwell Superficial (30N) ASTM E18 Tensile Testing Wedge and Axial Tensile ASTM F606/F606M Machined Pieces ASTM A370, E8/E8M, F606/F606M Proof Load, Internally Threaded Fasten

ASTM E18 Indirect Verification of Brinell Hardness Testers3 (126 to 758) HBW 0.025 HBW Hardness test blocks Scales & Balances3 – Class I Balances Class II Balances Class III Light Capacity Scale

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 THE LAB-MATERIALS TESTING 1150 White Birch Drive Rancho Cucamonga, CA 91730 Davyd Farrell Phone: 909-255-4042 MECHANICAL Valid To: June 30, 2026 Certificate Number:

ASTM E18 Indirect Verification of Microindentation Hardness Testers (Knoop & Vickers) 3 (100 to 250) HK (250 to 650) HK > 650 HK (100 to 900) HV 9.2 HK 9.3 HK 24 HK 7.6 HV Indirect verification method per ASTM