41 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform Plastics testing. Common methods used to test Plastics in United States: ASTM D638, ASTM D790, ASTM D618. Accredited providers include Boyle Laboratories, LLC, DatapointLabs, ATLAS MATERIAL TESTING TECHNOLOGY LLC ATLAS WEATHERING SERVICES GROUP, CTL Engineering, COLTS Laboratories, Inc.. Sites located in Ithaca, NY, Sidney, OH, Nashville, TN, Suite G Charlotte, NC, Phoenix, AZ.
Suite G Charlotte, NC, US
(A2LA Cert. No. 2800.01) 01/13/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 BOYLE LABORATORIES, LLC 4340 Taggart Creek Road, Suite G Charlotte, NC 28208 Charles Boyle Phone: 704 676 0778 MECHANICAL
Ithaca, NY, US
(A2LA Cert. No. 1242.01) 04/08/2025 Page 2 of 3 Test Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics Test Method ASTM D2990 (except compressive creep, and creep rupture) Heats of Fusion & Crys
Phoenix, AZ, US
(A2LA Cert. No. 0717.01) 09/11/2024 Page 5 of 7 CRRC (Cool Roof Rating Council) ANSI/CRRC-S100 (Section S.2.6) ANSI/CRRC-S100 Standard Test Methods for Determining Radiative Properties of Materials Using the following t
Columbus, OH, US
(A2LA Cert. No. 5220.01) 02/05/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CTL ENGINEERING, INC. 2860 Fisher Road Columbus, OH 43204 David A. Breitfeller, P.E. Phone: 614 276 8123 x1233 ME
Oldsmar, FL, US
(A2LA Cert. No. 1612.01) Revised 01/17/2025 Page 2 of 3 Test: Test Method(s): Hand Protection continued: Protective Gloves Against Mechanical Risks EN 388 (Excluding 6.1, 6.2, 6.3) Performance and Classification for Impact Resistant
Ithaca, NY, US
(A2LA Cert. No. 0326.01) 01/23/2025 Page 3 of 7 Test Method: Test Description: ASTM D1621 Com pressive Properties of Cellular Plastics ASTM D1622/D1622M Densit y
Sidney, OH, US
(A2LA Cert. No. 0749.01) 06/18/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ADVANCED COMPOSITES, INC. OHIO FACIL
Austin, TX, US
(A2LA Cert. No. 5132.01) Revised 12/18/2025 Page 4 of 6 Test: Test Method(s)1: Geotextiles and geotextile-related products – Determination of the resistance to weathering EN 12224 Geosynthetics – Determining the microbiolog
Columbia City, IN, US
(A2LA Cert. No. 1625.01) Revised 07/08/2025 Page 37 of 45 VII. Optical Quantities Parameter/Equipment Range CMC2 (±) Comments Gloss Meters3 20° 60° 85° 0.63 GU 0.42 GU 0.44 GU Gloss standards Gloss Tiles3
Sterling Heights, MI, US
(A2LA Cert. No. 0414.01) Revised 11/03/2025 Page 13 of 15 Test Standard Stickiness Test TOYOTA BOSHOKU BSDM502 (4.12) Stiffness Testing ASTM D 1388 (Option A), D5732; DIN 53362; FORD FLTM BN 157-02; GMW 3390; ISO 9073-7; SA
Mendota Heights, MN, US
(A2LA Cert. No. 2784.02) Revised 07/10/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:20171 NORTH AMERICAN SCIENCE ASSOCIATES, LLC (NAMSA) 1265 Kennestone Circle Marietta, GA 30066 Heather Laird Phone: 888-
Leeds, AL, US
(A2LA Cert. No. 2963.01) 02/03/2026 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SPECIALTY TESTING SERVICES 5751 Rex
Ann Arbor, MI, US
(A2LA Cert. No. 7617.01) Revised 03/05/2026 Page 5 of 17 Test(s)/Technology(ies): Test Method(s): Oxygen Index; 6.2.2 Rheological properties, 6.4 Electrical Properties
Nashville, TN, US
(A2LA Cert. No. 1957.02) 01/08/2024 Page 1 of 3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ADVANCED COMPOSITES, INC. TENNESSEE FACILITY – ENGINEERING 3074 Sidco Drive Nashville, TN 37204 Todd Fannin Phone:
Hong Kong, US
Annex to the Partial Accreditation Certificate D-PL-11180-01-03 Valid from : 06.11.2023 Valid to: 24.07.2027 Date of issue : 06.11.2023 Page 5 of 7 Testing field Standard / In-House Procedure / Version Title of Standard or
Fort Worth, TX, US
(A2LA Cert. No. 7018.01) Revised 04/18/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ALPINE POLYTECH, LP 1325 Ranchers Legacy Trail Fort Worth TX, 76126 Kris Winhold Phone: 817-765-40
Duarte, CA, US
(A2LA Cert. No. 0096.01) 09/19/2024 Page 3 of 11 Test Method: Test Title: ASTM D1043 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test ASTM D
Eden Prairie, MN, US
(A2LA Cert. No. 3561.01) 03/03/2025 Page 6 of 7 Test: Test Method1: Random Vibration ASTM D4728 Repetitive Shock – Rotary Vibration ASTM D999 Repetitive Shock – Linear Vibration ASTM D999 Compression ASTM D642 Impact Test for Pal
Harper Woods, MI, US
(A2LA Cert. No 0079.01) 12/31/2025 Page 1 of 11 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Evan Gregory Phone: 313 885 3535 Fax: 313
Waco, TX, US
(A2LA Cert. No. 6282.01) Revised 11/24/2025 Page 2 of 2 Test: Test Method: Thermal (continued) DSC, TA Instruments TA Q20 Transition Temperatures, Enthalpies of Fusion, Crystallization of Polymers ASTM D7426 (withdrawn 2022)
Sidney, OH, US
(A2LA Cert. No. 0749.02) 06/06/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ADVANCED COMPOSITES, INC. OHIO FACILITY – ENGINEERING
Huntersville, NC, US
(A2LA Cert. No. 5298.01) 11/06/2025 Page 2 of 2 KEY: AATCC American Association of Textile Chemists and Colorists ASTM ASTM International EPA Enviromental Protection Agency ISO International Organization
Kentwood, MI, US
(A2LA Cert. No. 7250.10) 12/08/2025 Page 2 of 6 Test: Test Description: ASTM C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets an
Richmond, IN, US
(A2LA Cert. No. 4071.01) Revised 02/10/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 JOHN J FARBER TECHNOLOGY AND INNOVATION CENTER 2211 Williamsburg Pike Richmond, IN 47374 Chris Hicks Ph
New Berlin, WI, US
(A2LA Cert. No. 0098.01) Revised 09/25/2025 Page 3 of 3 Test Technology Elements Test Method(s) Third Party Documents Miscellaneous Testing Cont. Fluid Resistance PA-11 PA-13 ASTM D471, D543, D1308, A967/A967M (Practice A,
Wichita, KS, US
(A2LA Cert. No. 3210.02) 09/29/2025 Page 1 of 4 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 NATIONAL INSTITUTE FOR AVIATION RESEARCH (NIAR) AT WICHITA STATE UNIVERSITY National Institute for Aviation Research Buildin
Anaheim, CA, US
(A2LA Cert. No. 5132.02) 04/23/2025 Page 2 of 4 Test Test Method(s) Test Method for Density of Plastics by the Density-Gradient Technique Test Method for Carbon Black in Olefin Plastics Standard Test Method for Environmen
Wittmann, AZ, US
(A2LA Cert. No. 859.02) Revised 04/25/2025 Page 3 of 6 1 Using the following test methods in addition to customer-supplied methods directly related to the types o
Maumee, OH, US
(A2LA Cert. No. 1656.01) 06/03/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AMERICAN GLASS RESEARCH 349 Tomahawk Drive Maumee, OH 43537 Neal Nichols Phone: 419 740 6071 or Brian Mitchell Pho
Ravenna, OH, US
(A2LA Cert. No. 0363.01) Revised 11/04/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SMITHERS 425 West Market Street Akron, OH 44303-2088 Jeff Marek Phone: 330 762 7441 CHEMICAL Valid To: M
Woburn, MA, US
(A2LA Cert. No. 3930.01) 01/13/2025 Page 2 of 2 Test(s) Test Method(s) Test Method Reference(s) Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer ASTM D1238 (Method A) Stan
Cincinnati, OH, US
(A2LA Cert. No. 0296.02) Revised 07/07/2025 Page 3 of 3 Test Test Method Non-Metallic Materials Testing (cont’d) Peel Test Peel Test ASTM D429, D1876 Floating Roller Peel ASTM D3167 Climbing Drum Peel
Madison Heights, MI, US
(A2LA Cert. No. 0386.01) Revised 07/15/2025 Page 10 of 15 Test: Test Standard(s): Random Tumbler LP-463KB-38-01-A; GMW3347 Plastics Determination of Temperature of ISO 75-1; ISO 75-2; Deflection Under Load (HDT) ASTM D648
Nappanee, IN, US
(A2LA Cert. No. 7783.01) Revised 12/16/2025 Page 9 of 27 Test Method: Test Description: ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D7
Nashville, TN, US
(A2LA Cert. No. 1957.01) 01/08/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ADVANCED COMPOSITES, INC. TENNESSEE FACILITY – MAIN PLANT 3050 Sidco Drive Nashville, TN 37204 Todd Fannin Phone: 6
Asheboro, NC, US
(A2LA Cert. No. 2974.01) 05/14/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CHROMA COLOR CORPORATION 1134 Highway 49 South Asheboro, NC 27205 Jennifer Presnell Phone: (336) 629 9184 ME
Belpre, OH, US
(A2LA Cert. No. 1331.01) 07/16/2025 Page 6 of 11 IV. Plastic Industry: Specific Measurements Parameter/Equipment Range CMC2 (±) Comments Verification of Izod or Charpy Notch Depth – Radius Ang
St. Paul, MN, US
(A2LA Cert. No. 0098.03) REVISED 04/16/2025 Page 3 of 7 Test(s): Test Method(s): Flammability Test Method for Automobile Interior Materials FMVSS 302; Honda HES D6003; SAE J369 Flammability Test Procedure for Seating Furnitur
Flint, MI, US
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited ACI PLASTICS LABORATORY Flint, MI for technica
Miami, FL, US
(A2LA Cert. No. 0717.02) 07/19/2024 Page 4 of 5 DIN (Deutsches Institut für Normung) DIN EN ISO 11664-4 Colorimetry – Part 4: CIE 1976 L*a*b* Colour Space DIN 53209 Designation of Degree of Blistering of Paint Coatings DIN 67530 Re
Burlington, WI, US
(A2LA Cert. No. 0850.02) 06/18/2025 Page 4 of 5 Test Description/ Equipment Parameter Test Method(s): Linear Abrasion (Taber) (0.2 to 4.0) inch stroke length, (2 to 75) cycles/minute, 2100 gram max load GMW 14130; ISO 1518 Martinda
This page is a fixed slice of the register: every Plastics scope we hold for United States. Search keeps that Plastics filter on, so you can narrow further by city, accreditation body, or any term from the scope text.
Search Plastics labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.