58 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM E10 testing. These labs commonly handle Metal, Steel, Fasteners matrices. Most frequently tested analytes via this method in United States: Hardness, Rockwell Hardness. From the accredited scope text: “ASTM E10 ___________________________________________________________ 1 This laboratory offers commercial and field calibration services. 2 Calibration and Measurement Capability Uncertainty (CMC) is t” “ASTM E1077, F2328, F2328M; SAE J121 (2013), J121M (2013), J419 Grain Size (Comparison, Intercept) ASTM E112, E930, E1181 Intergranular Attack ASTM A262 (Practice A) Macroetch ASTM E340; ASME Sec. IX (” “ASTM E10 Rockwell (HRB and HRC) ASTM E18 Superficial (HR15N, HR30N, HR15T, HR30T) ASTM E18 Vickers (10 kgf) ASTM E92 Microhardness Vickers (200, 300, 500 and 1000) gf Knoop (200, 300, 500) gf ASTM E38” “ASTM E1077 Determination of Delta Ferrite Content AMS 2315 Beta Transus Determination DIN EN 3684”
Rochester Hills, MI, US
ASTM E10 Durometer (Shore A) ASTM D2240 File Hardness SAE J864 International Hardness (IRHD) ASTM D1415 Rockwell (A, B, C, E) ASTM E18 Superficial (15N, 30N, 15T, 30T) ASTM E18 PM Apparent Hardness MPIF 43 Microhardness Knoop
Struthers, OH, US
ASTM E10 Microhardness (Knoop 200 & 500 g) ASTM E384 Rockwell (A, B, C, E, F, H, 15N, 15T, 30N, 30T, 45N, 45T) ASTM E18 Metallography Macroetching ASTM E381 Tensile Yield, Tensile, Reduction of Area, Elongation (Room temper
Whitehall, MI, US
ASTM E10, A370 Ball dia. 10 mm) Rockwell (HRBW, HRC, HREW, HR15N, HR 30N) ASTM E18, A370 Microindentation (Knoop, Vickers) ASTM E384 (100g, 300g, 500g) Carburization/Decarburization via the Chord Method ARP 1820 Room Temp. Te
Fairview, TN, US
ASTM E10 VII. Optical Quantities Parameter/Equipment Range CMC2, 5 (±) Comments Gloss Meters3 20°, 60°, 85° Up to 100 GU 0.67 GU Gloss standards Light Booths3 – Illuminanc
Kentwood, MI, US
ASTM E10 using standardized test blocks Indirect Verification Rockwell & Rockwell Superficial Hardness Testers 3 HRBW: Low Medium High HRC: Low Medium High HR15N: Low Medium High HR30N: Low Mediu
Portland, OR, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 IMR TEST LABS - PORTLAND 5687-A SE International Way Portland, OR 97222 Juile Sheufelt Phone: (503) 653 2904 MECHANICAL Valid To: September 30, 2027 Certificate Numbe
Naperville, IL, US
ASTM E10 Load cells within ASTM E4 Class A working range Stage micrometer Stopwatch Leeb Hardness Testers3 (517 to 759) HLD 9.6 HLD ASTM A956 Microindentation Hardness Testers (Knoop & Vickers)3 – For
Manchester, CT, US
Parameter Range CMC2 (±) Comments Indirect Verification of Rockwell Hardness Testers3 (cont) HR30TW: High Medium Low HR15N: High Medium Low HRA: High Medium Low 0.43 HR30TW 0.41 HR
Broken Arrow, OK, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT BROKEN ARROW 3100 North Hemlock Circle Broken Arrow, OK 74012 Mia Atherton Phone: 918 258 6066 mia.atherton@element.com MECHANICAL Valid To: September 30, 2026 Ce
South Gate, CA, US
ASTM E1077 Determination of Delta Ferrite Content AMS 2315 Beta Transus Determination DIN EN 3684
Cleveland, OH, US
ASTM E10; ISO 6506, ISO 898-5 (6.1.2) Rockwell / Superficial Rockwell (HRA, HRBW, HRC, HRD, HREW, HRFW, HRGW, HRHW, HRKW, HR15TW, HR30TW, HR45TW, HR15N, HR30N, HR45N) ASTM E18, F606/F606M; NASM 1312-6; ISO 6508, ISO 898-5 (6.1.3) Jo
Oklahoma City, OK, US
ASTM E10, ASTM E110
Oak Park, MI, US
ASTM E1077 Cast Iron Micro-Evaluation ASTM A247 Sample Preparation ASTM E3
Whitmore Lake, MI, US
ASTM E10 Rockwell (HRB and HRC) ASTM E18 Superficial (HR15N, HR30N, HR15T, HR30T) ASTM E18 Vickers (10 kgf) ASTM E92 Microhardness Vickers (200, 300, 500 and 1000) gf Knoop (200, 300, 500) gf
Columbia City, IN, US
Parameter/Equipment Range CMC2, 5, 10 (±) Comments Indirect Verification of Rockwell Hardness Testers3 (cont) HR45T: Low Medium High 1.3 HR45T 1.3 HR45T 1.2 HR45T Indirect verification per ASTM E18 I
Cleveland, OH, US
ASTM E1004 Hydrostatic Pressure Tests (0 to 40,000) psi SOP 44.001 Mechanical Tests of Metals and Metal Products Bend ASTM E190, E290; AWS B4.0, D1.1, D1.2, D1.5; DIN EN 910 Compression SOP 39.501 Creep ASTM E139 Direct Te
Sacramento, CA, US
Parameter/Equipment Range CMC2 (±) Comments Indirect Verification of Rockwell Hardness & Rockwell Superficial Hardness Tester 3 (cont) HR30N: Low Medium High HR30TW: Low Medium High HR45N: Low Medium High
Irving, TX, US
ASTM E10 Equotip (Leeb) Testers3, 8 ≈ 800 Ld 17 Ld ASTM A956 Hardness Testers – Vickers, Indirect Verification 3 ≈ 250 HV ≈ 720 HV 7.9 HV 12 HV ASTM E92 Hardness Testers – Knoop, Indirect Verification 3
Pittsburgh, PA, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 INDUSTRIAL TESTING LABORATORY SERVICES (A DIVISION OF ALBA ENTERPRISES, LLC) 635 Alpha Drive – RIDC Park Pittsburgh, PA 15238 Steve Lysiak Phone: 412 963 1900 MECHANICAL Vali
New Berlin, WI, US
ASTM E10 d is the mean of the n mean test diameters in millimeters CMC is stated as a percentage of the standardized test block hardness value
Clintonville, WI, US
ASTM E10, A370 Rockwell A, B, C, 30N, 30T ASTM E18, A370 Microhardness (Knoop and Vickers) (up to 500g) ASTM E384 Tensile ASTM A370, E8/E8M Charpy Impact ASTM E23 Metallographic Evaluation: Case Depth (T
Hartland, WI, US
ASTM E10 Indirect Verification of Equotip (Leeb) Hardness Testers 3 (780 to 792) Ld 16 Ld ASTM A956 Indirect Verification of Microindentation Hardness Testers3 – Knoop Vickers (545 HK, 733 HK) (
Corydon, IN, US
ASTM E10 using hardness test blocks Knoop Hardness Tester 3 (100 to 200) HK > 200 HK 3 HK 7.1 HK Indirect Verification per ASTM E92 using hardness test blocks Leeb Hardness Tester 3 783 HLD 16 HLD Indirect v
Allentown, PA, US
ASTM E10 Microhardness (HV 300g) ASTM E384 Rockwell Hardness (HRA, HRB, HRC) (15N) ASTM E18
Owatonna, MN, US
Parameter/Equipment Range CMC2 (±) Comments Scales & Balances3 (0.002 to 6.8) lb (6.8 to 50) lb (50 to 1000) lb (1001 to 5000) lb (5001 to 10 000) lb (0.000 040) lb (0.0022 + 0.0027W) lb 0.30 lb 1.6 lb 2.1 lb Verificat
Saint Louis, MO, US
ASTM E10 Rockwell Hardness (B, C, 30N, 30T) ASTM E18, F606/F606M Average Grain Size (Comparison) ASTM E112 Microhardness (HK 0.1, 0.5; HV 0.1, 0.5) ASTM E92, E384 Fastener Tensile (Axial & Wedge) ASTM F606/F606M Inclusion C
Paris, OH, US
ASTM E10 Brinell Force (Direct Verification) 3 (0 to 3000) kg load 0.16 kg Method: ACP-020F load cell Brinell Scope (Direct Verification) (0 to 7) mm 0.029 mm Stage micrometer ASTM E10 Indirect Verificat
Piedmont, SC, US
ASTM E10 & test blocks Force – Testing Machines (Load Cells with Indicators), Dynamometers (100 to 1000) lbf (1000 to 10 000) lbf (10 000 to 25 000) lbf 0.80 lbf 2.6 lbf 6.4 lbf Comparison using precision load cells
Milwaukee, WI, US
ASTM E10 Indirect Verification of Leeb Hardness Testers HLD: Low Medium High 8 HLD 9 HLD 10 HLD ASTM A956 Indirect Verification of Microindentation Hardness Testers (Knoop & Vickers)3 – Vick
Tulsa, OK, US
ASTM E10, ASTM E110 Mass - Fixed Points 1mg 2mg 3mg 5mg 10mg 20mg 30mg 50mg 100mg 200mg 300mg 500mg 1g 2g 3g 5g 10g 20g 25g 30g 40g 50g 100g 200g 300g 500g 1000g 2000g 3000g 5000g 0.0051 mg 0.00
Erie, PA, US
ASTM E10 Rockwell (B, C, 15N, 30N, 30T) ASTM E18 Impact (Charpy) -320°F to Ambient ASTM A370, E23; AWS D1.5/D1.5M Tensile Ambient Temperature ASTM A370, E8/E8M Metallographic Evaluation: Preparation ASTM E3 Decarburization ASTM E1
Round Rock, TX, US
ASTM E10 ASTM E18 Microhardness Knoop (HK 0.5) Vickers (HV 0.1, HV 0.5, HV 1.0) ASTM E384 Tensile Testing ASTM A370, ASTM E8/E8M 1 When the date, edition, version, etc. is not identified in the scope o
Huntington Beach, CA, US
ASTM E1077, ASTM F835, ASTM F2328, ASTM G79; ISO 898-1, ISO 898-5, ISO 4507; SAE J78, SAE J121, SAE J419, SAE J423 Delta Ferrite AMS 2315 Density of Powder Metallurgy ASTM B311 Grain Size ASTM E112, ASTM E930, ASTM E1181; ISO 643;
Edmond, OK, US
ASTM E10 Indirect Verification of Vickers Hardness Testers3 > 600 HV 12 HV Indirect verification per ASTM E384 with ASTM E92
Gary, IN, US
ASTM E10 Microhardness Knoop, Vickers (50, 100, 200, 300, 500 gf), (1 kgf) ASTM E384 Macrohardness Vickers (5, 10 kgf) ASTM E92 Charpy Impact ASTM E23; BS EN ISO 148-1 Nil Ductility Transition (Drop Weight) ASTM E208 Olsen Ductility
Portland, OR, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 North Cutter Circle, Suite #480 Portland, OR 97217 Bethina Barboza Wilb Phone: 503 961 9518 MECHAN
Birmingham, AL, US
ASTM E10 Microhardness (HV0.3, HV0.5, HV1) ASTM E384 Room Temperature Tensile Test (Machined) (≤ 390 klbf) ASTM A370, B557, E8/E8M Axial, Wedge Tensile Test ASTM A370, F606/F606M Proof Load (Internal & External Threads, Fasten
Richardson, TX, US
ASTM E10 Durometer Hardness (Shore A, D, and M) ASTM D2240 Microhardness Knoop – 500g, Vickers 500g ASTM E384 Rockwell (HRBW, HRC, HR15N, HR30N, HR15TW, HR30TW) ASTM E18 Concrete Agencies Engaged in Construction Inspection, Testi
Winona, MN, US
ASTM E10 ASTM A956/A956M Hex Socket Strength ASTM F880, F880M (2017), F912, F912M (2017); ISO 898-5, 3506-3 Microhardness (Vickers) (300 & 500 gf) ASTM E384 Proof (External Threaded) Bolts ASTM A370 (A3.2.1.2), F606/F606M (
Davenport, IA, US
ASTM E10 Plastic Strain Ratio (r Value) ASTM E517 Proof (External Threaded) ASTM F606/F606M Strain Hardening Exponent (n Value) ASTM E646 Tension (Complete, Axial <= 60 klbs at Room Temp.) ASTM A370, E8/E8M, F606/F606M Charpy Impact (-
Waukesha, WI, US
ASTM E10 Leeb Hardness ASTM A956 Microhardness (Vickers, Knoop) (100gf, 200gf and 500gf) ASTM B578, E384 Metallographic evaluation Preparation ASTM B665, E3 Light Microscopy ASTM E883 Grain Size ASTM B390 (Withdrawn 2006), E112
Tipp City, OH, US
ASTM E10 Microindentation Knoop (100, 300 and 500) g ASTM E384, E92 Vickers (100, 300 and 500) g ASTM E384, E92 Tensile: Grey Iron Tensile Testing ASTM A48/A48M Mechanical Testing of Steel Products ASTM A370 (Sections 5-17) Tensio
Crystal Lake, IL, US
ASTM E1077 ASM Metals Handbook, Vol. 9; ASTM E1268, E562, E883 Impact, Charpy ASTM A370 (Sections 20-30), E23; ISO 148-1
Suite E Addison, IL, US
ASTM E10 & ASTM E110, error uncertainty is given as a brinell hardness number Indirect Verification Leeb Hardness Testers3 714 HLD 10 HLD ASTM A956 Direct Verification of Brinell Hardness Testers 3 – Verific
Phoenix, AZ, US
ASTM E10; ASTM E92; ISO 6507-1 Microhardness Knoop: 100, 200, 300, 500 gf Vickers: 100, 200, 300, 500, 1000 gf ASTM E384; F606/606M MacroetchTesting ASTM E381; ASTM A604 Measurements of plating thickness by Opt
Casselberry, FL, US
ASTM E10 Microhardness ASTM E384 Metallographic Preparation ASTM E3 Microetching ASTM E407 Grain Size ASTM E112 Fatigue Crack Growth ASTM E647
Houston, TX, US
ASTM E10 Brinell Hardness of Metallic Materials ASTM E8 Tension Testing of Metallic Materials ASTM E21 Elevated Temperature Tension Tests of Metallic Materials ASTM E23 Notched Bar Impact Testing of Metallic Materials ASTM E92 Vickers H
Arlington, TX, US
ASTM E10 Rockwell Superficial (30N) ASTM E18 Tensile Testing Wedge and Axial Tensile ASTM F606/F606M Machined Pieces ASTM A370, E8/E8M, F606/F606M Proof Load, Internally Threaded Fasteners ASTM A370, F606/F606M Proof Load, External
Rancho Cucamonga, CA, US
ASTM E10 Fastener Testing Wedge and Axial Tensile ASTM A370, F606/606M Axial Proof Load (Internal and External Threads) ASTM A370, A962, F606/606M Yield Strength ASTM A370, F606/606M, E8/E8M Chemical Properties OES Chemistry
Sanford, FL, US
Parameter/Equipment Range CMC2 (±) Comments Indirect Verification of Rockwell Hardness & Rockwell Superficial Hardness Tester 3 (cont) HR15N: Low Medium High HR15TW: Low Medium High HR30N: Low Medium High
Showing labs 1–50 of 58. Use pagination below to see more.
This page is a fixed slice of the register: every ASTM E10 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.