23 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform ASTM E10 testing. These labs commonly handle Metal matrices. Most frequently tested analytes via this method in United Kingdom: Hardness. From the accredited scope text: “ASTM E10 MID Rockwell (B & C Scales) BS EN ISO 6508-1 ASTM E18 MID Vickers (HV5, HV10 & HV30) BS EN ISO 6507-1 ASTM E92 MID Vickers Hardness (Low Force and Microhardness) (HV0.1, HV0.2 and HV0.5) BS E” “ASTM E10 Rockwell (Scales B & C) BS EN ISO 6508-1 ASTM E18 Vickers (0.1, 0.2, 0.3, 0.5, 1.0, 10 & 30 kg) BS EN ISO 6507-1 ASTM E92 ASTM E384 Documented In-House Method MET 5N Stress-rupture (forces fr” “ASTM E10-23 Rockwell ‘B’ and ‘C’ BS EN ISO 6508-1:2023 ASTM E18-24 Vickers (HV 0.3, 5, 10, 30) BS EN ISO 6507-1:2023 ASTM E384-22 ASTM E92-23 Impact:- Charpy (-196 °C and -120 °C to ambient temperatur” “ASTM E10-23 B Rockwell (B and C Scales) BS EN ISO 6508-1:2023 ASTM E18-22 B Tensile: Tensile (ambient temperature) (Force from 0.4kN to 1000kN) BS EN ISO 6892-1:19 BS EN 2002-1:2005 BS 4A4:Part 1:Sect”
Gateshead, GB
ASTM E10-23 Rockwell (C Scale) BS EN ISO 6508-1:2023 ASTM E18-24 GAT Vickers (Hv10) BS EN ISO 6507-1:2023 ASTM E92-23 GAT Vickers Micro / Low force (Hv0.3, 0.5 & Hv1.0) BS EN ISO 6507-1:2023 ASTM E384-22 GAT
Hereford, GB
ASTM E10-23 Rockwell (B and C scales only) BS EN ISO 6508-1:2023 ASTM E18-24
Wolverhampton, GB
ASTM E10 CON Rockwell (B&C Scale) BS EN ISO 6508-1 ASTM E18 CON Vickers (HV5, 10 & 30) BS EN ISO 6507-1 ASTM E92 CON Vickers – Micro (HV0.2) BS EN ISO 6507-1 ASTM E384 CON Impact: Charpy at -196°C
Norfolk, GB
ASTM E10 Rockwell (B and C scales) BS EN ISO 6508-1 ASTM E18 Vickers (HV5, 10) BS EN ISO 6507-1 ASTM E92 Tensile at ambient temperature (Forces up to 600 kN) BS EN ISO 6892-1 ASTM E8/E8 ASTM A370 ASTM B557
Banbury, GB
ASTM E10 Rockwell Hardness (HRB & HRC) ASTM E18 Vickers Hardness (HV5, HV10, HV30) ASTM E92
South Yorkshire, GB
ASTM E10 Rockwell (Scales B & C) BS EN ISO 6508-1 ASTM E18 Vickers (0.1, 0.2, 0.3, 0.5, 1.0, 10 & 30 kg) BS EN ISO 6507-1 ASTM E92 ASTM E384 Documented In-House Method MET 5N Stress-rupture (forces from 1.5 kN (
Oldham, GB
ASTM E10-23 ASTM A370-24a A Rockwell Hardness (HRC, HRB) BS EN ISO 6508-1:2023 ASTM E18-24 ASTM A370-24a A Impact: Charpy (temperatures from -196 °C and -120 °C to ambient) BS EN ISO 148-1:2016 ASTM E23-23a AS
Sheffield, GB
ASTM E10-23 Rockwell (B & C Scales) BS EN ISO 6508-1:2023 ASTM E18-22 Vickers (HV10 & HV30) BS EN ISO 6507-1:2023 ASTM E92-23 Corrosion Resistance to pitting corrosion ASTM G48-11(2020) (Method A) Inter-gran
South Yorkshire, GB
ASTM E10 Rockwell (HRB and HRC) BS EN ISO 6508-1 ASTM A370 ASTM E18 Vickers ( HV10 and HV30) BS EN ISO 6507-1 ASTM E92 Vickers Micro-hardness (HV0.3, HV0.5 and HV1.0) BS EN ISO 6507-1 ASTM E384 Impact:
West Midlands, GB
ASTM E10:23 A Rockwell Scales B & C BS EN ISO 6508-1:2023 ASTM E18-24 A Vickers HV5, HV10, HV30 BS EN ISO 6507-1:2023 ASTM E92-23 A Vickers HV10 BS EN ISO 6507-1:2023 ASTM E92-23 B Low Force
West Yorkshire, GB
ASTM E10 ASTM A370 Brinell Hardness (portable) Comparative method Documented In-House Method MT 310 Vickers Hardness (HV0.1, HV0.3, HV0.5, HV1.0, HV5, HV10 & HV30) BS EN ISO 6507-1 ASTM E92 Rockwell Hardness (HRC
South Yorkshire, GB
ASTM E10-23 ASTM A370-24a Rockwell (B & C) BS EN ISO 6508-1:2023 ASTM E18-24 ASTM A370-24a Vickers (HV10 & HV30) BS EN ISO 6507-1:2023 Metallurgical Tests Grain size (Comparison & Linear Intercept Methods)
Tyne & Wear, GB
ASTM E10-23 Vickers (HV10) BS EN ISO 6507-1:2023 Charpy Impact (V notch) (-101ºC to ambient & -196ºC) including lateral expansion and percentage shear BS EN ISO 148-1:2016 ASTM A370-24a ASTM E23-25 Izod (ambient) BS
Wolverhampton, GB
ASTM E10-23 Rockwell (B & C Scales) BS EN ISO 6508-1: 2016 ASTM E18- 24 Impact: Charpy at -101°C to ambient & -196°C (including % Shear & Lateral Expansion) ASTM E23- 24 BS EN ISO 148-1 :2016 Tensile:
Aberdeen, GB
ASTM E10 Altens Rockwell hardness (HRBW and HRC scales) BS EN ISO 6508-1 ASTM E18 Altens
Derbyshire, GB
ASTM E10-23 B Rockwell (B and C Scales) BS EN ISO 6508-1:2023 ASTM E18-22 B Tensile: Tensile (ambient temperature) (Force from 0.4kN to 1000kN) BS EN ISO 6892-1:19 BS EN 2002-1:2005 BS 4A4:Part 1:Section 1:1966
Abingdon, GB
ASTM E10-23 Rockwell (B & C) BS EN ISO 6508-1:2023 ASTM E18-24 Vickers (HV5, 10 and 30) BS EN ISO 6507-1:2023 ASTM E92-23 Impact: Charpy (V- notch) (-196°C and -50°C to Ambient Temperature) BS EN ISO 148-1:2016
West Midlands, GB
ASTM E10-23 Rockwell ‘B’ and ‘C’ BS EN ISO 6508-1:2023 ASTM E18-24 Vickers (HV 0.3, 5, 10, 30) BS EN ISO 6507-1:2023 ASTM E384-22 ASTM E92-23 Impact:- Charpy (-196 °C and -120 °C to ambient temperature) Inc
Lancaster, GB
ASTM E10 MID Rockwell (B & C Scales) BS EN ISO 6508-1 ASTM E18 MID Vickers (HV5, HV10 & HV30) BS EN ISO 6507-1 ASTM E92 MID Vickers Hardness (Low Force and Microhardness) (HV0.1, HV0.2 and HV0.5) BS EN ISO 6507-1 AS
West Midlands, GB
ASTM E10-23 Rockwell Hardness HRB & HRC BS EN ISO 6508-1:2023 ASTM E18-24 Vickers Hardness HV10 BS EN ISO 6507-1:2023 ASTM E92-23 Impact: Charpy V-notch (-196°C and -85°C to Ambient) BS EN ISO 148-1:2016 AS
Biggleswade, GB
ASTM E10-23 Main Lab Impact Charpy V notch including % shear and lateral expansion (ambient to -60°C) ASTM E23:24 ASTM A370:24a Main Lab Charpy V notch (ambient to -60°C) BS EN ISO 148-1:2016 Main Lab Iz
West Midlands, GB
ASTM E10-23 Rockwell (C Scale) BS EN ISO 6508-1:2023 ASTM E18-24 Vickers (HV10) BS EN ISO 6507-1:2023 Low load Hardness (Vickers HV0.5) BS EN ISO 6507-1:2023 ASTM E384-22
West Midlands, GB
ASTM E10-23 ASTM A370-23 Rockwell Hardness (HRB & C) BS EN ISO 6508-1:2016 ASTM E18-24 Vickers Hardness (micro indentation) BS EN ISO 6507-1 :2018 ASTM E92-23 ASTM E384-22 Determination of decarburisation and carbu
This page is a fixed slice of the register: every ASTM E10 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.