ASTM D792 Accredited Testing Labs Worldwide

ASTM D792; UL 746A Dimensional Stability IPC-4101; IPC-TM-650 (Method 2.4.39) DSC – Differential Scanning Calorimetry IPC-4101; IPC-TM-650 (Method 2.4.25); ASTM D3418 Ductility IPC 6013; IPC TM 650 (Method 2.4.2.1); IPC-TM

ASTM D792 (Method A) Vicat Softening Temperature of Plastics (VST) ASTM D1525 Environmental Stress-Cracking of Ethylene Plastics ASTM D1693 (Conditions A and B)

ASTM D792 Résines, Matières plastiques Distribution de masses moléculaires Mp, Mn, Mw (en g/mole) et Indice de polymolécularité (-) Séparation des macromolécules en fonction de leur volume hygrodynamique (fonction de la masse moléc

ASTM D792; GMW3182; HES D6506 [REV.5]; ISO 1183-1; NES M0007 [2014-N], Sect. 7; NES M0141[2018-N], Sect. 5.4; TSM0501G [REV. 16], Sect. 9.1 Filler & Ash Content - Muffle Furnace (40 to 1050) °C ASTM D2584; ASTM D5630; IS

ASTM D792 – 20 Standard Test Methods for Density an d Specific Gravity (Relative Density) of Plastics by Displacement ASTM D882 – 18 Standard Test Method for Tensile Pro perties of Thin Plastic Sheeting ASTM D2990 – 17 Standard Test Met

ASTM D792, D297 Taber Abrasion ASTM D4060; MIL-A-8625 Corrosion/Environmental Testing Coating Evaluation ASTM D610, D714, D1654, D3359 Humidity ASTM D1735, D4585/D4585M Salt Spray (Fog) ASTM B117 UV (Xenon, Fluorescent)

Test Standard Scratch Resistance of Organic Coatings – Simulation of Car Wash Installations SUBARU TS371-00-004 (7.5), TS371-00-009 (4.2.10), TS371-07-026 (13); GMW 14865 Scratch Resistance of Organic Coatings and Self Adhesiv

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT MATERIALS TECHNOLOGY CHICAGO 194 Internationale Boulevard Glendale Heights, IL 60139 Jeff Romain Phone: 630 221 0385 x76237 E-mail: jeff.romain@element.com CHEMICAL

1.1.6 Dichte-, Volumen- und Gewichtsprüfungen *** DIN EN ISO 60 2000-01 Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen genormten Trichter abfließen können (Schüttdichte) DIN EN ISO 62 2008-05

ASTM D792 Density and Specific Gravity of Plastics by Displacement GRAVIMETRIC Test Method Test ASTM D297 (Sections 17-29, 41-51) Rubber Products – Chemical Analysis ASTM D5630 Standard Test Method for Ash Content in Plastics RU

ASTM D792; ISO 1183-1 (Method A & B) Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR） ASTM D1238, Procedure B; ISO 1133-1, Procedure B Tensile Properties ASTM D638; ISO 527-1, ISO 527-2 Flexural Properties ASTM D790; ISO 178

ASTM D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (Method A) ASTM D877 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes ASTM D8

ASTM D792 (Method A) Fourier Transform Infrared Spectroscopy (FTIR) (Qualitative Only) BAL T-141 Ion Chromatography IPC-TM-650 (Methods 2.3.28 and 2.3.28.1); MIL-STD-883, Method 5011 pH MIL-STD-883, Method 5011 Porosity – Vapor

ASTM D792; SAE AS5127/1 – 6.1 14-Day Hardness SAE AS5127/1 – 6.2 Resistance to Thermal Expansion SAE AS5127/1 – 6.4 Heat Reversion Resistance SAE AS5127/1 – 6.5 Hydrolytic Stability SAE AS5127/1 – 6.6 Shaving and Sanding of

ASTM D792, Apparent density (foams) ISO 845 Textiles and textile products At least once a year Mass per unit area/ gram Mass per unit area EN 12127, ISO 3801 Rubber At least once a year Density Density ISO 2781 Hardened Concr

ASTM D792, Method A Test Method for Roundness of Glass Spheres ASTM D1155 Test Method for Density of Liquid Coatings, Inks and Related Products ASTM D1475 Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformat

ASTM D792, ASTM D1056, ASTM D1475, ASTM D1622, ASTM D3574, ASTM D3575, ASTM D3776, ASTM D3887; CFFA-20, CFFA-21, CFFA-220, CFFA-700; Chrysler LP-463LB-07-01, LP-463NB-15-01; Ford FLTM BN 106-01; GMW3182; Honda HES D6002, HES D6506;

Test: Test Method(s): Powder Characterization continued Carney Flow Rate / Apparent Density ASTM B964, B417 Tap Density ASTM B527 Physical Properties Density/Specific Gravity ASTM B311, D792 (Method A), D1475, D297 Restri

ASTM D792 Rigid Plastics, Polymers and composites Compression (Loads: 0.05N to 100kN) (Temperature range -50°C to + 250°C) ISO 604 ASTM D695 Thermoplastics Vicat Softening Point BS EN ISO 306 ASTM D1525

ASTM D792 (Method A) DSC ASTM D3418 FT-IR PTMP-7.2.1.2-P5 Melt Flow Rates of Thermoplastics by Extrusion Plastometer ASTM D1238 (Procedure A) Ash Testing by Muffle Furnace ASTM D5630 Durometer Hardness ASTM D2240 (Shore A and D) Sur

ASTM D792 Flex Properties ASTM D790 Fluorescent UV Exposure of Plastics ASTM D4329 Friction Properties ASTM D1894 (2023) Tensile Properties ASTM D638, except Modulus and A.3 Heat Deflection ASTM D648, Method A Impact Ga

ASTM D792 Filler Reinforcement of Cured Resins PA-03 ASTM D2584

ASTM D792 (Method A) Test Methods for Tensile Properties of Thin Plastic Sheeting Standard Test Method for Peel or Stripping Strength of Adhesive Bonds ASTM D882 ASTM D903 Test Method for Initial Tear Resistance of Plastic

ASTM D792 Metallographic Preperation ASTM E3, E407 Metallographic Evaluation ASM Handbook Volume 9 Grain Size ASTM E112 Metal and Oxide Coating Thickness ASTM B487 Decarburization/Case Depth ASTM E1077; SAE J423 Image

Test Test Method Non-Metallic Materials Testing (cont’d) Peel Test Peel Test ASTM D429, D1876 Floating Roller Peel ASTM D3167 Climbing Drum Peel ASTM D1781; EN 2243-3 Flexural Test Flexural ASTM

ASTM D792, Method A Calculated Density/Specific Gravity Testers 3 (1.04 to 1.44) g/cm3 (>1.44 to 1.8) g/cm3 (1.04 to 1.44) (>1.44 to 1.8) 0.0011 g/cm3 + 0.6R 0.000 81 g/cm3 + 0.6R 0.0012 + 0.6R 0.000 81 + 0.6R

ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement ASTM D828 Standard test method for tensile properties of paper and paperboard using constant-rate-of-elongation apparatus

ASTM D792, D297 (Section 16.3) Ash Analysis ASTM D5630 Ignition Loss ASTM D2584 Fourier Transform Infrared Spectroscopy (FTIR) ATR ASTM E1252 FTIR Microscope ASTM E334 FTIR Rubber Analysis ASTM D3677 Chemical Composition (OES) Low-a

ASTM D792 (Method A) ISO 1183-1 (Method A) Tensile Strength ASTM D638 (excluding Sections 11.3, 11.4 and 11.5) ISO 527-1 (excluding Sections 9.5, 10.2, 10.3 and 10.4), ISO 527-2, ISO 527-4 Durometer Hardness (Shore A and

ASTM D792, D3574 (Test A), D3575 (Test W); ISO 845 Sunshine Carbon Arc ASTM G23, G152 Taber Abrasion – Rotary Platform ASTM D3884; GMW3208; SAE J948, J1530; ISO 5470-1 Xenon Weathering SAE J2412; SAE J2527; FLTM BO 116-01;