EN ISO 6892-2 Accredited Testing Labs Worldwide
71 accredited laboratories in 9 countries hold EN ISO 6892-2 in their ISO/IEC 17025 scope. Primary accreditors include Deutsche Akkreditierungsstelle, Italian Accreditation Body, Comité français d'accréditation. In the register, EN ISO 6892-2 scope entries most often cover Hardness, Average Grain Size, Carbon Equivalent in Metal, Plastics, Concrete.
Available in 9 Countries
Top matrices for EN ISO 6892-2
Top analytes for EN ISO 6892-2
- Hardness (5)
- Average Grain Size (1)
- Carbon Equivalent (1)
- Charpy Impact (1)
- Grain Size (1)
- Hydrogen (1)
- Hydrogen Embrittlement (1)
- Nitrogen (1)
Sample labs
Prüfungen in den Bereichen: Mechanisch-technologische Prüfungen an metallischen Werkstoffen; Dichtebestimmung von Sintermetallen und Hartmetallen; metallographische Prüfungen und Prüfungen an Metallpulvern; chemisch-analytische Prüfungen
EN ISO 6892-2:2011, EN ISO 6892-2:2018 Prove di trazione a temperatura elevata/Tensile testing at elevated temperature (da 1 kN a 300kN fino a 1000°C) ASTM E21-09, ASTM E21-17e1, ASTM E21-20 Prove di trazione/Tensile testing (da 1 kN a
EN ISO 6892-2 (méthode B) NF EN ISO 6892-2 - 04/2011 (norme annulée) * NF EN 10002-5 – 04/1992 (norme annulée) * NF EN 2002-002 ASTM E21 Température maxi : 900 °C Matériaux métalliques Essai de flexion par choc KU, KV NF EN 10045-1
EN ISO 6892-2 (Méthode B) *NF EN ISO 6892-2 (Méthode B) – 2011 (norme annulée) RCCM MC1210 *RCCM MC1212 édition 2000, édition 2000 + modifications 2002, édition 2000 + modifications 2002 et 2005, édition 2000 + modifications 2002
EN ISO 6892-2 BS EN 2002-2 ASTM E21 CON Fracture Toughness: CTOD and K1c (in the temperature range -196°C and -120ºC to ambient, three point specimen) BS 7448-1 ASTM E1290 (withdrawn) ISO 12135 ASTM E399 ASTM E182
IRCM - ISTITUTO RICERCA CONTROLLO MATERIALI S.R.L. UNI CEI EN ISO/IEC 17025:2018 Allegato al certificato di accreditamento n. 01199 rev. 4 del 23/01/2025 Via dei Castagni 9 21048 Solbiate Arno VA Revisione: 25 Sede A Data: 18/11/
5 Mechanical-technological tests 5.1 Determination of the quasi-static properties o f metallic materials, plastics and plastic composites at different temperatures using tensile, compression and shear tests [Flex B] DIN EN ISO 6892
1 Mechanical tests 1.1 Tensile testing DIN EN IS O 6892 -1 2020-06 Metallic materials - Tensile testing - Part 1: Method of test at room temperature DIN EN ISO 6892 -2 2018-09 Metallic materials - Tensile testing - Part 2:
Test: Test Method(s): Knoop (100, 200, 500) g ASTM, E384, E92, F606/F606M; NASM 1312-6; ISO 5454 Vickers (300 g, 500 g, 1000 g, 10 Kg) ASTM E92, E384, F606/F606M; NASM 1312-6; ISO 6507, ISO 898-5 (6.1.1) Shackles RR-C-271 Tape Adhesi
EN ISO 6892-2:2018, ISO 6892-2:2018, UNI EN ISO 6892-2:2018 Prove di trazione a temperatura elevata/Tensile testing at elevated temperature (50 °C ÷ 800 °C - 12 ÷ 600 kN) ASTM E21-20 Prove di trazione/Tensile testing (3 ÷ 1500 kN) ASTM
Prüfungen in den Bereichen: mechanisch-technologische Prüfungen, metallographische Prüfungen, Oberflächen- und Maßprüfungen an Verbindungselementen aus metallischen Werkstoffen; Untersuchung von niedrig- und hochlegierten Stählen mittel
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD. 19 Wildmere Rd. Banbury, United Kingdom OX16 3JU Steve Atkins Email: s.atkins@wmtr.co.uk www.wmtr.co.uk MECHANICAL Valid To: Ju
Test Test Method(s) Mechanical Tests of Metals and Metal Products cont’d Hydrogen Embrittlement ASTM F606, F606M; NASM 1312-5, 1312-14; SAE J78, J81, J1237, J238, J773, USCAR-7; 6010M, 6171M; MIL-DTL-32119 Impact (-452 to +500) °F A
EN ISO 6892-2 BS EN 2002-2 ASTM E21 Proof and Tensile strength (temperature - ambient) (forces from 0.2 kN - 2000 kN) Documented In-House Method MTP2 Bolts, screws and nut Tension and compression To documented plans agreed
EN ISO 6892-2 – 2011 Norme abrogée)* NF EN ISO 6892-2 (Méthodes A et B) NF EN 10002-5 – 1992 (Norme abrogée)* ASTM E21 NF EN 2002-002 Température maxi : 900°C Matériaux métalliques Essai de flexion par choc KU, KV (J) NF EN ISO 14
DIN EN ISO 6508 -1 2016-12 Metallische Werkstoffe – Härteprüfung nach Rockwell – Teil 1: Prüfverfahren DIN EN ISO 6892 -1 2020-06 Metallische Werkstoffe – Zugversuch – Teil 1: Prüfverfahren bei Raumtemperatur DIN EN ISO 689
EN ISO 6892-2 (méthodes A et B) ASTM E21 GE S400 (code AI0B) Température d’essais : de 250 à 960°C Essai de traction à chaud Rp0,2, Rm, E, A, Z NF EN 2002-2 Température d’essais : de 250 à 960°C Essai de flexion par choc KU8, KV8 (J
EN ISO 6892-2 (Méthode B) NF EN ISO 6892-2 (Méthode B) – 2011 (Norme abrogée)* NF EN 10002-5 – 1992 (Norme abrogée)* Plage de température : 100 °C à 700°C Matériaux métalliques Essai de flexion par choc KU, KV (J) NF EN ISO 148-1
EN ISO 6892-2:2018 Materiali metallici/Metallic materials - solo/only Ferrosi e non ferrosi/Ferrous and non ferrous _ _ _ _ _ _ Pendolo di Charpy _ _ Trazione Trazione Denominazione della prova / Campi di prova Frazione di vol
DIN EN ISO 6892 -2 2018-09 Metallische Werkstoffe – Zugversuch – Teil 2: Prüfverfahren bei erhöhter Temperatur MH, HH DIN EN 2002 -001 2006-11 Luft - und Raumfahrt – Metallische Werkstoffe – Prüfverfahren – Teil 1: Zugver
EN ISO 6892-2:2018 Trazione Prove di trazione a temperatura elevata/Tensile testing at elevated temperature (Da 2 a 200 kN; Da 80 a 900°C) ASTM E21-20 Trazione Materiali metallici/Metallic materials - solo/only Ferrosi e non ferrosi/Fe
Test: Test Method(s): Mechanical: Bend BS EN ISO 7438; BS 4449:1988 (Withdrawn); ASTM A615/A615M; ISO 6935-2; BS EN ISO 15630-1; ASTM E290; DVS 2203-5; SS 560; BS 6744 Charpy Impact including Lateral Expansion and Shear Fract
This document is a translation. The definitive version is the original German annex to the accreditation certificate. Tests in the fields: mechanical-technological and metallographic tests, corrosion tests as well as optical emission
EN ISO 6892-2 Kemistintie Jänneteräkset (jännepunokset, -langat ja - tangot) Taivutusvetokoe FLX* SFS-EN ISO 15630-3 Kemistintie Jänneteräkset (jännepunokset, -langat ja - tangot) Väsytyskoe FLX* SFS-EN ISO 15630-3 RILEM RPC 8 Kemistintie
Prüfungen in den Bereichen: mechanisch-technologische Prüfungen, metallographische Prüfungen, Oberflächen- und Maßprüfungen an Verbindungselementen aus metallischen Werkstoffen; Untersuchung von niedrig- und hochlegierten Stählen mittel
Prüfungen in den Bereichen: mechanisch-technologische und metallographische Prüfungen, Korrosionsprüfungen und Funken- emissionsspektrometrie von Stahl- und Eisenwerkstoffen und Nichteisenmetall-Werkstoffen; physikalisch-chemische und c
EN ISO 6892-2:2018 Trazione Prove di trazione a temperatura elevata/Tensile testing at elevated temperature (1 ÷ 100 kN; 100 ÷ 1000 °C) ASTM E21-20 Trazione Spaziatura dell'austenite/Austenite spacing (µm) ASTM E112-25 - solo/only p
EN ISO 6892-2 (méthodes A et B) - 04/2011 (norme annulée) * NF EN ISO 6892-2 (méthodes A et B) NF EN 10002-5 – 04/1992 (norme annulée) * ASTM E21-09* ASTM E21-17* ASTM E21 RCC-M MC1212 Température maxi 600°C Matériaux métalliques
Gü ltig ab: 18.02.2026 Ausstellungsdatum: 18.02.2026 Seite 3 von 7 1 Mechanisch-technologische Prüfung 1.1 Festigkeitsuntersuchungen [Flex A] ASTM E8/E8M -24 2024 Standard Test Methods for Tension Testing of Metallic Mate
EN ISO 6892-2 2018-09 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature DIN EN ISO 9018 2016-02 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 METAL IMPROVEMENT COMPANY TECHNOLOGY SERVICE (SUZHOU) CO., LTD. – IMR TEST LABS SUZHOU 75 Jiangpu Road, Shengpu Township Suzhou Industrial Park 215126 Suzhou Jiangsu, People’s Republi
1 Härteprüfung ASTM E 10 -18 2018 Standard Test Methods for Brinell Hardness of Metallic Materials ASTM E 18 -19 2019 Standard Test Methods for Rockwell Hardness of Metallic Materials ASTM E 92 -17 2017 Standard Test M
Prüfungen in den Bereichen: mechanisch-technologische Prüfungen an metallischen Werkstoffen sowie metallographische Untersuchungen Flexibler Akkreditierungsbereich: Dem Prüflaboratorium ist, ohne dass es einer vorherigen Information u
EN ISO 6892-2 (Méthodes A et B) NF EN 2002-002 ASTM E21 Température maxi : 800°C # Accréditation rendue obligatoire dans le cadre réglementaire français précisé par le texte cité en référence dans le document Cofrac LAB INF 99 di
MEGA-LAB S.R.L. Via Luigi Galvani 23/A 24061 Albano Sant'Alessandro BG Allegato al certificato di accreditamento n. 01227 rev. 6 del 23/01/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 28 Sede B Data: 17/12/2025 pag. 3 di 3 Leg
EN ISO 6892-2:2011, UNI EN ISO Trazione Prove di trazione/Tensile testing Tubo su piastra tubiera/Tube to tubesheet Denominazione della prova / Campi di prova 6892-2:2018 ASTM A370-24a _ Metodo di prova Tecnica di prova O&I Esame
Innerhalb der mit *** gekennzeichneten Prüfbereiche ist dem Prüflaboratorium ist, ohne dass es einer vorherigen Information und Zustimmung der DAkkS bedarf, die Anwendung der hier aufgeführten genormten oder ihnen gleichzusetzenden Prüfv
1 Mechanisch-technologische Werkstoffprüfungen 1.1 Härteprüfung DIN EN ISO 6506 -1 2015-02 Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 1: Prüfve r- fahren DIN EN ISO 6507 -1 2018-07 Metallische Werkstoffe - Härt
EN ISO 6892-2 2018-09 DIN EN ISO 7438 2021-03 DIN EN 10164 2018-12 SEP 1390 1996-07 DIN EN ISO 642 2000-01 Metallische Werkstoffe - Härteprüfung nach Rockwell - Teil 1: Prüf- verfahren (hier: Skalen C / HRC) Metallische Werkstoffe - Zugvers
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1 Mechanical tests [Flex A] 1.1 Tensile test DIN EN ISO 4136 2022-09 Destructive tests on welds in metallic m
EN ISO 6892-2:2018 BS EN 2002-2:2005 Creep and Stress Rupture: Creep (Temperature range ambient to 1150 C) (not including constant stress) BS EN ISO 204:2023 BS EN 2002-005:2007 Stress rupture (Temperature range
EN ISO 6892-2:2018-08, Metoda B ASTM E21-20 Twardość HBW Zakres: średnica kulki 2,5 mm, 5 mm, 10 mm Twardość Brinella PN EN ISO 6506-1: 2014-12 ASTM E10-17 Twardość HV Zakres: HV5; HV10; HV30; Metoda Vickersa PN-EN ISO 6507
EN ISO 6892-2 2018-09 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (here: Procedure A and B) DIN EN ISO 148-1 2017-05 Metallic materials - Charpy pendulum impact test - Part 1: Test metho
This document is a translation. The definitive version is the original German annex to the accreditation certificate. Tests in the fields: mechanical-technological and metallographic tests of steel- and ferrous materials as well as non-
EN ISO 6892-2:2011, UNI EN ISO 6892-2:2018 Trazione Prove di trazione a temperatura elevata/Tensile testing at elevated temperature (da 2kN a 100kN; da 50°C a 800°C) EN 10002-5:1991 Tenacità a frattura in condizioni di deformazione pian
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1 Mechanic-technological tests [Flex A] 1.1 Tensile tests DIN EN ISO 4136 2022 -09 Destructive tests on welds
Prüfung in den Bereichen: mechanisch-technologische Prüfungen an Metallen und ihren Schweißverbindungen; metallographische Prüfungen, emissionsspektrometrische und auf Röntgenfluoreszenz basierende Werkstoffanalysen (stationär und mobil)
EN ISO 6892-2 – 2011 (méthode B) (norme annulée)* NF EN ISO 6892-2 (méthode B) ASTM E21 Température maximum : 900°C Matériaux métalliques Essai de traction à basse température Rp, Rm, Rt, A, Z ISO 15579 - 2000 (norme annulée)*
EN ISO 6892-2:2018, ISO 6892-2:2018, UNI EN ISO 6892-2:2018 Prove di trazione a temperatura elevata/Tensile testing at elevated temperature ASTM E21-20 Resistenza alla tensocorrosione in cloruro di magnesio bollente/Resistance to stress-c
EN ISO 6892-2 ASTM E21 Altens Tensile (temperature range 10ºC to -196 ºC BS EN ISO 6892-3 Altens Charpy impact at temperatures between ambient and 100C and - 130C and at -196C BS EN ISO 148-1 ASTM E23 ASTM A370
Showing labs 1–50 of 71. Use pagination below to see more.