9 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN ISO 6892-2 testing. These labs commonly handle Metal matrices. From the accredited scope text: “EN ISO 6892-2 BS EN 2002-2 LAN Forces 0.2 kN up to 400 kN Sub-Zero Temperature -1960C and -1000C to ambient BS EN ISO 6892-3 LAN Through thickness tensile BS EN 10164 ASTM A770/A770M MID Pipe and Pipe” “EN ISO 6892-2 (Method A) ENGINEERING and STRUCTURAL COMPONENTS, FIXINGS, Performance Tests STRUCTURES and WELDMENTS • Dynamic structural tests, tension, compression and Forces 40 N to 1.6 MN • Deflect” “EN ISO 6892-2 :2018 ASTM E21-20 Impact: Charpy V and U notch (-196C and -101C to ambient temperature) BS EN ISO 148-1:2016 ASTM E23-24 ASTM A370-23 Brinell testing (HBW 10/3000 & 5/750) BS EN ISO 65” “EN ISO 6892-2:2018 BS EN 2002-2:2005 ASTM E21-20 Stress Rupture Plain and notched stress rupture (Temperature range 600 to 1000°C) (Forces >10KN) ASTM E139-11(2018) ASTM E292-24 BS EN 2002-005:2007 Im”
Wolverhampton, GB
EN ISO 6892-2 BS EN 2002-2 ASTM E21 CON Fracture Toughness: CTOD and K1c (in the temperature range -196°C and -120ºC to ambient, three point specimen) BS 7448-1 ASTM E1290 (withdrawn) ISO 12135 ASTM E399 ASTM E182
Banbury, GB
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD. 19 Wildmere Rd. Banbury, United Kingdom OX16 3JU Steve Atkins Email: s.atkins@wmtr.co.uk www.wmtr.co.uk MECHANICAL Valid To: Ju
South Yorkshire, GB
EN ISO 6892-2 BS EN 2002-2 ASTM E21 Proof and Tensile strength (temperature - ambient) (forces from 0.2 kN - 2000 kN) Documented In-House Method MTP2 Bolts, screws and nut Tension and compression To documented plans agreed
Swansea, GB
EN ISO 6892-2:2018 BS EN 2002-2:2005 Creep and Stress Rupture: Creep (Temperature range ambient to 1150 C) (not including constant stress) BS EN ISO 204:2023 BS EN 2002-005:2007 Stress rupture (Temperature range
Aberdeen, GB
EN ISO 6892-2 ASTM E21 Altens Tensile (temperature range 10ºC to -196 ºC BS EN ISO 6892-3 Altens Charpy impact at temperatures between ambient and 100C and - 130C and at -196C BS EN ISO 148-1 ASTM E23 ASTM A370
Lancaster, GB
EN ISO 6892-2 BS EN 2002-2 LAN Forces 0.2 kN up to 400 kN Sub-Zero Temperature -1960C and -1000C to ambient BS EN ISO 6892-3 LAN Through thickness tensile BS EN 10164 ASTM A770/A770M MID Pipe and Pipeline
Brierley Hill, GB
EN ISO 6892-2 (Method A) ENGINEERING and STRUCTURAL COMPONENTS, FIXINGS, Performance Tests STRUCTURES and WELDMENTS • Dynamic structural tests, tension, compression and Forces 40 N to 1.6 MN • Deflection +/- 50 mm • Maximum
West Midlands, GB
EN ISO 6892-2 :2018 ASTM E21-20 Impact: Charpy V and U notch (-196C and -101C to ambient temperature) BS EN ISO 148-1:2016 ASTM E23-24 ASTM A370-23 Brinell testing (HBW 10/3000 & 5/750) BS EN ISO 6506-1:2014 ASTM E10
Sheffield, GB
EN ISO 6892-2:2018 BS EN 2002-2:2005 ASTM E21-20 Stress Rupture Plain and notched stress rupture (Temperature range 600 to 1000°C) (Forces >10KN) ASTM E139-11(2018) ASTM E292-24 BS EN 2002-005:2007 Impact: Charp
This page is a fixed slice of the register: every EN ISO 6892-2 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.