ISO 6603-2 Accredited Testing Labs Worldwide
See all 11 labs worldwide for ISO 6603 (any part)
Part 1 (Non-instrumented impact testing): 3 labs · Part 2 (Instrumented impact testing): 10 labs
10 accredited laboratories in 3 countries hold ISO 6603-2 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle. In the register, ISO 6603-2 scope entries most often cover Density, Impact Resistance, Moisture Content in Plastics, Textile.
Available in 3 Countries
Top matrices for ISO 6603-2
Top analytes for ISO 6603-2
- Density (1)
- Impact Resistance (1)
- Moisture Content (1)
Sample labs
ISO 6603-2 Plastics – Determination of Dynamic Mechanical Properties ISO 6721-7 Plastics – Differential Scanning Calorimetry (DSC) – Determination of Glass Transition Temperature ISO 11357-2 Plastics – Differential Scanning Calori
3.3 Biegeprüfungen ASTM D790 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ISO 178 2010-12 Kunststoffe ‒ Bestimmung der Biegeeigenschaften
1 Mechanisch-technologische Untersuchungen DIN EN ISO 527 -2 2012-06 Kunststoffe – Bestimmung der Zugeigenschaften – Teil 2: Prüfbedingungen für Form- und Extrusionsmassen DIN EN ISO 178 2019-08 Kunststoffe – Bestimmung der
ISO 6603-2 Fallversuche (Eingrenzungsverfahren) mit einem Fallwerk Last (g) visuelle Begutachtung DIN EN ISO 7765-1 ASTM D 1709a DIN EN 477 DIN EN 22248 Kaltbiegeverhalten mit einer Falzvorrichtung Temperatur (°C) Visuelle Beg
ISO 6603-2 - ASTM D3763 Static puncture test - ISO 12236 - ASTM D4833 Steam jet test DBL 5416 | ISO 16925 Impact resistance – free falling dart ISO 7765-1 Tear resistance - ISO 6383-1 (Trouser tear) - ISO 6383-2 (Elmendorf)
ISO 6603-2 Infrared Scan ASTM D2124, ASTM E168, ASTM E1252 (Section 9.0); GM9740P (1988) Low Temperature Brittleness ASTM D746, ASTM D751 (Section 60), ASTM D1912, ASTM D2137; CFFA-6; Chrysler LP-463DD-7-01, LP-463-LB-11-01; Ford F
ISO 6603-2; ISO 16750-3 (Sec. 4.3); FLTM BO 151-01; GMW14093; GMW 14127 Mass and Thickness Determination ASTM D3776 (Option C); ISO 2286-2 (Method A); ISO 2589; ISO 5084; SAE J860 (Mass), SAE J882 (Thickness); GMW3182 Mech
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1.6 Drop test (puncture test) DIN EN 477 2018-04 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determin
ISO 6603-2 Stress Mark Susceptibility GM9302P2 (03/14 replaced by GMW17141); GMW17141 Immersion Water FLTM BI 104-01 (Procedure B & C); FLTM BI 104-04 Wicking ASTM D751 (sections 99-103); GM9146P (except section
DIN EN ISO 9073 -4 1997-09 Textilien - Prüfverfahren für Vliesstoffe - Teil 4: Bestimmung der Weiterreißfestigkeit DIN EN ISO 13937 -2 2000-06 Textilien - Weiterreißeigenschaften von textilen Flächengebilden - Teil 2: Bestim