EN ISO 1463 Accredited Testing Labs in Germany
14 laboratories in Germany are accredited by DAKKS under ISO/IEC 17025 to perform EN ISO 1463 testing. These labs commonly handle Metal, Glass, Plastics matrices. Most frequently tested analytes via this method in Germany: Duktilität, Elementen, Faser. Accredited providers include RST Rail System Testing, Tritech Oberflächentechnik, Hochschule Pforzheim - Gestaltung, Technik, Wirtschaft und Recht STI, Forschung und Materialprüfung Nürnberg Wilhelm, Analytik Service Obernburg. Sites located in Magdeburg, Hennigsdorf, Solingen, Pforzheim, Nürnberg.
Accredited Labs
Anlage zur Akkreditierungsurkunde D-PL-11012-01-03 Gültig ab: 15.10.2024 Ausstellungsdatum: 19.09.2025 Seite 4 von 5 arbeiten ‒ Teil 1: Prüfverfahren DIN EN ISO 22826 2021-05 Zerstörende Prüfung an Schweißungen von me
Anlage zur Teil-Akkreditierungsurkunde D-PL-18879-02-01 Gültig ab: 11.07.2025 Ausstellungsdatum: 11.07.2025 Seite 6 von 15 DIN EN ISO 4628 -3 2016-07 Beschichtungsst offe – Beurteilung von Beschichtungsschäden – Bewertung
Anlage zur Akkreditierungsurkunde D-PL-19151-01-01 Gültig ab: 04.02.2025 Ausstellungsdatum: 06.10.2025 Seite 2 von 3 Prüfungen in den Bereichen: Metallografie, Härteprüfung, rasterelektronenmikroskopische Analytik und Oberfläc
Anlage zur Akkreditierungsurkunde D-PL-22043-01-00 Gültig ab: 03.02.2023 Ausstellungsdatum: 03.02.2023 Seite 2 von 5 ISO 15835 -2 2018-10 Stahl für die Bewehrung von Beton - Mechanische Verbindungen für Stäbe - Teil 2: Prü
Anlage zur Akkreditierungsurkunde D-PL-20885-01-01 Gültig ab: 15.12.2025 Ausstellungsdatum: 15.12.2025 Seite 8 von 11 20 Elementaranalyse von chemischen Rohstoffen, Zwis chen- und Endprodukten nach Verbrennung (Detektionsprinz
Anlage zur Akkreditierungsurkunde D-PL-19634-01-00 Gültig ab: 14.05.2025 Ausstellungsdatum: 16.09.2025 Seite 22 von 24 8 Biegestreifenverfahren [Flex A] DIN EN ISO 22088 -3 2006-11 Kunststoffe ‒ Bestimmung der Beständi
Anlage zur Akkreditierungsurkunde D-PL-19262-01-02 Gültig ab: 04.11.2025 Ausstellungsdatum: 04.11.2025 Seite 3 von 3 2 Metallographische Untersuchungen 2.1 Genormte Prüfverfahren [Flex A] DIN EN ISO 643 2020-06 Stahl
Annex to the Partial Accreditation Certificate D-PL-18869-01-01 Valid from : 11.01.2024 Date of issue : 11.01.2024 Page 5 of 23 This document is a translation. The definitive version is the original German annex to the accreditat
Anlage zur Teil-Akkreditierungsurkunde D-PL-22604-01-01 Gültig ab: 29.01.2024 Ausstellungsdatum: 29.01.2024 Seite 3 von 4 1.3 Ermittlung der Duktilität DIN EN ISO 148 -1 2017-05 Metallische Werkstoffe - Kerbschlagbiegever
Annex to the accreditation certificate D-PL-20563-01-00 Valid from: 30.11.2021 Date of issue: 30.11.2021 Page 8 of 10 - Translation - ISO 4967 2013-07 Steel - Determination of content of non -metallic inclusions - Microgra
Anlage zur Teil-Akkreditierungsurkunde D-PL-19521-01-02 Gültig ab: 29.04.2024 Ausstellungsdatum: 29.04.2024 Seite 3 von 7 DIN EN ISO 18203 2022-07 Stahl - Bestimmung der Dicke gehärteter Randschichten ASTM E 10 2018 Stan
Anlage zur Akkreditierungsurkunde D-PL-11021-01-02 Gültig ab: 15.07.2025 Ausstellungsdatum: 15.07.2025 Seite 3 von 7 1 Mechanisch-technologische Prüfungen [Flex A] ISO 4968 1979-11 Stahl – Makrographische Untersuchung mit Sc
Annex to the Accreditation Certificate D-PL-19083-01-00 Valid from : 14.02.2024 Date of issue : 14.02.2024 Page 4 of 5 This document is a translation. The definitive version is the original German annex to the accreditation certifi
Anlage zur Teil-Akkreditierungsurkunde D-PL-11336-01-01 Gültig ab: 30.04.2024 Ausstellungsdatum: 30.04.2024 Seite 7 von 9 AITM 3-0027 2016-05 Bestimmung des Schmelzverhaltens und das Ausmaß der Kristalli- nität von halb-kristallin
Top matrices for EN ISO 1463 in Germany
Top analytes for EN ISO 1463 in Germany
- Duktilität (1)
- Elementen (1)
- Faser (1)
- Tensile (1)
About ISO/IEC 17025 in Germany
Deutsche Akkreditierungsstelle (DAKKS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Germany.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.