Registers refreshed 2026-11-08.See refresh dates
China

UP-Standard Technical Service (Shanghai) Co.,

Room 607, Building No. 1, No. 4777 North Jiasong Road, Jiading District, Shanghai, 201814, People's Republic of China, Shanghai, China

Visit website
A2LA 3450.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
40
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 40 standard numbers and the 32 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO23
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1456Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)
ISO 2177Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
Show all 23
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2808Paints and varnishes - Determination of film thickness
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 4532Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test
ISO 4623-2Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
ISO 4892-1Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance and requirements
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 16925Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
ISO 20433Leather - Tests for colour fastness - Colour fastness to crocking
ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 4628 series6
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 4628-10Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO 105 series3
ISO 105-A02Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
ISO 105-B06Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
Other standards8
ASTM B764
ASTM D7869
DIN 55662
DIN 75201
EN 1464
SAE J2527
VDA 238
VDA 278

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

4 lines
A2LA

ISO/IEC 17025

Active

3450.01

The scope document we hold says it is valid until 2027-06-30.

View scope

Accredited scope, certificate 3450.01

LineMethodMatrixRange
1GMW 3208; SAE J948; PR 360; FLTM BI 106-01; GMW 14829; ISO 2409; AA-0180; MBN 10494-5 s5.2.1; MBN 50494-5 s5.2.1; DBL 5416 s12.4; DBL 5425 s8.5; DBL 5428 s8.5; DBL 7384 s8.5; DBL 1302 s7.5.2; MBN 10494-5 s5.5; MBN 50494-5 s5.5; SAE J1545; ISO 105-A02; A03; AATCC Grey Scale Procedure 2; FLTM BN 107-01; ISO 20433; PV 3906; ISO105-X12; DBL 7384 s8.10; DBL 1302 s7.13; MBN 51000-7 s5.4; GMW 14124; PV 1200; PV 2005; PR 303.6; DBL 5416 s12.7; DBL 5416 A.2.10; DBL 5425 s8.8; DBL 5425 A.1.8; DBL 7384 s8.17; DBL 1302 s7.9; WSS-M2P188-C1; FLTM BQ 104-07; DBL 5411 Table 5; DBL 5428 s8.8; DBL 5428 A.1.8; DBL 1665 Table A.6.6; DBL 7904 Table 2; DBL 7906 s7.5.6; AK LV 112; MBN 51000-4; ISO 1456; ISO 1463; ISO 2808; DIN EN ISO 2178; DIN EN ISO 2360; ISO 2808; ISO 2177; ASTM B764; GMW3235; SAE J1756; PV3015; SMTC 5 400 010; DIN 75201; ISO/IEC 17025:2017Metalto 97 GU
2

Extracted from the scope document; tables may not line up. View scope for the original.

(A2LA Cert. No. 3450.01) 05/29/2025 Page 2 of 3 Test: Test Method(s): Formaldehyde Test FLTM BZ 156-01 (Part A); PV3925; SMTC 5 400 011; VDA 275 Gloss (Coated Substrates) ASTM D523; FLTM BI 110-01; ISO 2813 Humidity Test GMW 14729; ISO 6270-2; WSS-M2P188-C1; TL 226 Table 2, 5.3; AA-0213; ISO 6270-1; FLTM BI 104-02; DBL 7384 s8.19; DBL 1302 s7.10, DBL 5562 s7.16 Odor Test FLTM BO 131-03; GMW 3205; PV 3900; SMTC 5 400 012; VDA 270 Oven Aging WSS-M2P188-C1; TL 226 Table 2, 4.1; TL 211 Table 1, 4.2; AA-0026; DBL 5416 A.2.11; DBL 5425 A.1.9; DBL 7384 s8.9; DBL 1302 s7.8; WSS-M2P180-E s3.4.12; DBL 5411 Table 5; DBL 5428 A.1.9; DBL 7381 Table 8; DBL 1665 Table A.6.5, DBL 7904 Table 2, DBL 7906 s7.5.2, s7.5.3; MBN 51000-4; ISO 188 (Method D only) Resistance to Chemicals and Liquids FLTM BI 113-08; GMW14334, 14445, 15891, PV 3964; TL 226 Table 2, 6.2; TL 211 Table 1, 7.0; AA-0053; FLTM BI 168-01; DBL 7384 s8.11; DBL 1302 s7.14; MBN 51000-7 s5.5, s5.6 Water and Soap Spotting FLTM BI 113-01 Cleanability FLTM BN 112-08 (Hard plastics only, except for synthetic soil) Resistance to Perspiration FLTM BI 113-06 Salt Spray Test GMW 3286; ISO 9227; AA-0324 Cyclic Corrosion PV 1210; DIN EN ISO 11997-1; DBL 4093 s9.4; DBL 1111 s9.4; DBL 7381 Table 10, Table 11, Table 12; DBL 1665 Table A.6.4, DIN 55635; DBL 7382 Table 7, Table 8, Table 9; DBL 7383 s9.11; MBN 10494-6 s5.5.1; AA-0224 CASS ISO 9227; DBL 7381 Table 16; MBN 10494-6 s5.4 Scratch and Mar Resistance FLTM BO 162-01; GMW 14125-Method K, GMW 14698; SAE J365; PV 3952; PV 3987; FLTM BI 161-01; MBN 10494-5 s5.9.16; MBN 50494-5 s5.9.2; DBL 7384 s8.12; DBL 1302 s7.16 TVOC Test FLTM BZ 157-01; PV 3341; SMTC 5 400 009; VDA 277 Water Immersion FLTM BI 104-01; GMW 14704; DBL 7384 s8.8; DBL 1302 s7.7; DBL 5416 A.2.8; DBL 5425 A.1.6; DBL 5428 A.1.6, DBL 7904 Table 2, DBL 7906 s7.5.5
3ISO 105-B06; SAE J1885; J1960; PV 1303; PV 3929; PV 3930; SAE J2412; SAE J2527; MBN 10505; MBN 10506; DIN EN ISO 4892-1; DIN EN ISO 4892-2; DBL 5555 s23.2; FLTM BO 116-01; ASTM D 7869; MBN 55555-5 s5.3; MBN 55555-5 s5.4; MBN 51000-5 s5.3; MBN 51000-5 s5.4; DBL 5416 s12.6; DIN 55662; DIN EN ISO 16925; GMW 16745; FLTM BO 160-04; PV 1503; AA-0136; MBN 10494-5 s5.4; MBN 50494-5 s5.4; DBL 5411 s6.2; DBL 5425 s8.7; DBL 5428 s8.7; DBL 7381 Table 7; TL 52038 s5.2; DBL 5416 s12.5; FLTM BI 157-06; ISO 20567-1; AA-0079; MBN 10494-5; MBN 50494-5 s5.3.1; SAE J400; DBL 5425 s8.6; DBL5428 s8.6; DBL 7381 Table 6; DBL 1665 Table A.5; GMW 15634; VDA278; GMW 15635; FLTM BZ 156-01; SMTC 5 400 018; TS-BD-003; ISO 4532; WSS-M2P188-C1 s3.4.4; MBN 10526 s9; ISO 527-1/2/3/4/5; GB/T 1040.1/.2/.3/.4/.5; ISO 37; ISO 178; GB/T 9341; ISO 4623-2; MBN 10494-6 s5.6; DBL 7381 Table 17; ISO 4628-1; ISO 4628-2; ISO 4628-3; ISO 4628-4; ISO 4628-8; ISO 4628-10; MBN 10494-6 s7; VDA Volume 16; GB/T 1033.1; ISO 1183-1; ISO 1519; MBN 10494-5 s5.7; MBN 50494-5 s5.7; GB/T 9345.1; ISO 3451-1; DIN EN 1464; MBN 10526 s6.3; TL 52038 s5.1; MBN 10526 s6.4; GB/T 1043.1; ISO 179-1; ISO 48-4; ISO 34-1; VDA 238-201--
4

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited UP-STANDARD TECHNICAL SERVICE (SHANGHAI) CO., LTD. Shanghai, People’s Republic of China for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 29th day of May 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 3450.01 Valid to June 30, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Labs with overlapping accredited scope in China

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.