Registers refreshed 2026-11-08.See refresh dates
United States

HP Pelzer Materials

1175 Crooks Road, 48084, Troy, MI, United States

Visit website
A2LA 1976.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
32
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 32 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM19
ASTM D395
ASTM D412
ASTM D413
ASTM D624
ASTM D751
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D896
ASTM D903
ASTM D1278
ASTM D1335
ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness
ASTM D2261
Show all 19
ASTM D2646
ASTM D3574Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Polyurethane Foams
ASTM D3776
ASTM D3884
ASTM D5034
ASTM D5587
ASTM D6290
ISO8
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 105-A01Textiles - Tests for colour fastness - Part A01: General principles of testing
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1856Flexible cellular polymeric materials - Determination of compression set
ISO 3386-1Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 5084Textiles - Determination of thickness of textiles and textile products
ISO 13937-2Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
AATCC3
AATCC 8
AATCC 22
AATCC 107
Other standards2
DIN 53357
VDA 270

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

5 lines
A2LA

ISO/IEC 17025

Active

1976.01

The scope document we hold says it is valid until 2026-11-30.

View scope

Accredited scope, certificate 1976.01

LineMethodMatrixRange
1SAE J1530; GM 9337P; GMW3208; Ford FLTM BN108-02; ASTM D3884; ASTM D903; ASTM D413; ASTM D751; Chrysler LP 463 LB-10-01; Ford FLTM BN 151-05; Ford FLTM 113-01; GMW16596; GMW14892; DIN 53357; ASTM D1278; Chrysler CLP 463 KC-04-01; Ford FLTM BN 112-08; GMW 3026; GMW 3402; Chrysler LP 463 LB-11-01; GMW14108; GMW14171; SAE J323; DBL 5306; ASTM D6290; SAE J1767; SAE J361; AS.00001; Ford FLTM BI 109-01automotive interior trim components-
2ASTM D3574 (Test D); ASTM D395 (Method B); ISO 1856; ISO 3386-1; SAE J1352; PV 3919; SAE J1389; AATCC 8; ISO 105-A01; SAE J861; Ford FLTM BN 107-01; Ford FLTM BN 107-02; AATCC 107; GMW14141; Chrysler LP 463KC-01-01; Ford FLTM AN 101-01; GMW16998; Chrysler CLP 463LB-12-01 A and B; GMW14124 (Cycles M, R, W); BO 040-01- A; WSS-M99P32-E 3.3.15.1; WSS-M99P32-D 3.4.4.1; WSS-M99P32-D6 3.6.2.1; WSS-M99P32-E1 3.7.2.1; PV 1200; TL 52685 3.2; TL 52685 3.3; GMW3387; ISO 3795; FMVSS 302; SAE J369; Honda C206A; Honda D6003-99; GM 9070P; GMW3232; TSM 0500G; TL 1010; GB 8410; DBL 5307 (Section 5.1); ASTM D896; Chrysler MS-HZ100, Sec.3.5; SAE J1756; GMW3235; Chrysler LP463DB 12-01; ASTM D3574 (Tests B1 and C)--45 to 150 °C
3GMW3259; WSS-M99P32-E 3.3.4; WSS-M99P32-D 3.3.4; WSS-M8P16 3.8.4; WSS-M99P32-D6 3.6.1; WSS-M99P32-E1 3.7.1; MS-HZ-100, 2.7; ASTM D2240 (Type A); ISO 868; Chrysler LP 463LB-13-01; MS-AY352; MS-HZ100; Ford WSS-M15P6; BO 040-01-B; WSS-M99P32-E 3.3.15.2; WSS-M99P32-D 3.4.4.2; WSS-M99P32-D6 3.6.2.2; WSS-M99P32-E1 3.7.2.2; TL 52685 3.1; GMW14194; 14196; DBL 5972 (Section 4.3); SAE J1351; Chrysler LP 463KC-9-01; GMW3205; VDA270; PV3900; ASTM D2646 (Sections 17 and 18); SAE J315 (Section 15); J883; J855; Ford FLTM BN 105-01; 03; GMW4217; GMW16596 (Section 3.6.2); SAE J949; ASTM D790; ASTM D2261; D3574 (Test F); Chrysler LP 463 KB-03-01; ASTM D5587; GMW3326; ISO 13937-2; ASTM D624; ISO 34-1; ASTM D5034; D751 (Section 11, Procedure A); ASTM D412 (Method A); D3574 (Test E); GMW3010; ISO 5084; SAE J882; J1355; Chrysler LP 463LB-07-01-to 150 °C
4ASTM D1335; Chrysler LP 463KB-22-01; GMW14148; AATCC 22; Chrysler LP 463KC-03-01; GMW14102; ASTM D3776; SAE J860; Chrysler LP 463LB-07-01; Ford FLTM BN 106-01; GMW3182; SAE J913--
5

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited HP PELZER MATERIALS TESTING LABORATORY Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 16th day of December 2024. __ _____________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 1976.01 Valid to November 30, 2026

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

1175 Crooks Road, Troy, MI, 48084, US

42.60559, -83.14993

Open in Maps
← All accredited testing labs in Michigan
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.