United States

Washington Penn

2080 North Main St., 15301, Washington, PA, United States

A2LA 867.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 49
A2LA certificate: 1
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 49 standard numbers and the 25 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM28

ASTM D256

ASTM D412Exclusion

Limits written next to it

ASTM D412, D638 (Except A.3)

Exclusion. Written next to it on line 2 of A2LA certificate 867.01.

ASTM D523Standard Test Method for Specular Gloss

ASTM D618

ASTM D624

ASTM D635

ASTM D638Standard Test Method for Tensile Properties of PlasticsExclusion

Limits written next to it

ASTM D638 (Except A.3)

Exclusion. Written next to it on line 2 of A2LA certificate 867.01.

ASTM D648

ASTM D785

ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

ASTM D955

Show all 28

ASTM D1238

ASTM D1525

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

ASTM D2244

ASTM D2565

ASTM D3045

ASTM D3763

ASTM D3835

ASTM D5420

ASTM D5630

ASTM D6980

ASTM E793

ASTM E794

ASTM E831

ASTM E1131

ASTM E1252

ISO20

ISO 75Plastics and ebonite - Determination of temperature of deflection under load

ISO 178Plastics - Determination of flexural properties

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

ISO 180Plastics - Determination of Izod impact strength

ISO 294-4Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage

ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

ISO 2039-2Plastics - Determination of hardness - Part 2: Rockwell hardness

Show all 20

ISO 2578Plastics - Determination of time-temperature limits after prolonged exposure to heat

ISO 3451-1Plastics - Determination of ash - Part 1: General methods

ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials

ISO 6603-2Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles

ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

Other standards1

SAE J2527

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines

A2LA

ISO/IEC 17025

Active

867.01

The scope document we hold says it is valid until 2027-10-31.

View scope

Accredited scope, certificate 867.01

Line	Method	Matrix	Range
1	ASTM D2565; SAE J2527; ASTM D5630 Method B; ISO 1172; ISO 3451-1 Method A; ASTM D3835; ASTM D2244; ASTM D618 Procedure A; ASTM D648 Method B; ISO 75; PV 1306; ASTM D2240; FLTM BZ 157-01; VW PV3341; ASTM D635; D3801; FMVSS-302; FLTM BN 024-02; GM 9070P; GMW3232; ISO 3795; UL94HB; UL94V; VW TL1010; ASTM D790; ISO 178; ASTM D1238; ISO 1133-1; GMW3235; SAE J1756; ISO/IEC 17025:2017	plastics and polymers	-
2	ASTM E1252; ASTM D523; ISO 179-1; ASTM D5420; ASTM D256 Method A; ISO 180; ASTM D3763; GM 9300P (Inactive September 2012); GM 9904P (Inactive January 2011); ISO 6603-2; ASTM D3045; ISO 2578; ASTM D6980; ASTM D955; ISO 294-4; FLTM BO 131-03; GMW3205; VW PV3900; ASTM D785; ISO 2039-2; GMW14688-A; PV 3974; PV 3952; ASTM D792 Method A; ISO 1183-1 Method A; ASTM D624; ASTM D412; ASTM D638 (Except A.3); ISO 527-1; ISO 527-2; ASTM E793; ASTM E794; ISO 11357-1; ISO 11357-3; ASTM E1131; ISO 11358-1; ASTM E831; ISO 11359-2; ASTM D1525 Rate B; ISO 306	-	-
3	Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited WASHINGTON PENN Washington, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 22nd day of December 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 0867.01 Valid to October 31, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

2080 North Main St., Washington, PA, 15301, US

40.19438, -80.25413

Open in Maps

← All accredited testing labs in Pennsylvania

← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.