Mettler Toledo (Industrial)

(A2LA Cert. No. 1902.01) 07/21/2025 Page 4 of 4 Parameter/Equipment Range CMC 2, 5 (±) Comments Balances and Scales, Avoirdupois 3 (cont) (> 60 000 to ≤ 70 000) lb (> 70 000 to ≤ 100 000) lb (> 100 000 to ≤ 120 000) lb 18 lb 20 lb 22 lb NIST F weights Tank Scales, Metric3 Tank Scales, Avoirdupois 3 (≥ 1000 to ≤ 4000) kg (> 4000 to ≤ 8000) kg (> 8000 to ≤ 12 000) kg (> 12 000 to ≤ 16 000) kg (> 16 000 to ≤ 24 000) kg (> 24 000 to ≤ 32 000) kg (≥ 2200 to ≤ 8800) lb (> 8800 to ≤ 17 600) lb (> 17 600 to ≤ 26 400) lb (> 26 400 to ≤ 35 000) lb (> 35 000 to ≤ 53 000) lb (> 53 000 to ≤ 70 000) lb 0.99 kg 1.7 kg 2.3 kg 2.8 kg 4.2 kg 5.0 kg 2.2 lb 3.7 lb 5.1 lb 6.7 lb 9.1 lb 11 lb RapidCal™ Tank Scale Calibration RapidCal™ Tank Scale Calibration ___________________________________________________________ 1 This laboratory offers commercial calibration service and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. resolution) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer’s site being larger than the CMC. 4 This accreditation includes those field service repr esentatives located in the United States and Canada reporting to Mettler Toledo (Industrial), Columbus, OH. 5 CMC components that can be reasonably attributed to the Unit Under Test have not been utilized in the calculation of the CMC value for this measurement parameter. 6 This scope meets A2LA’s P112 Flexible Scope Policy.