BHD Test & Measurement

(A2LA Cert. No. 3104.01) 05/29/2025 Page 7 of 13 Parameter/Range Frequency CMC2, 6, 7 (±) Comments AC Voltage – Measure (cont) (100 to 1000) V (1 to 150) kV (1 to 1000) Hz (1 to 2) kHz (2 to 10) kHz (10 to 30) kHz (30 to 100) kHz (1 to 1000) Hz 9.6 mV + 0.014 % 9.5 mV + 0.014 % 12 mV + 0.014 % 27 mV + 0.041 % 65 mV + 0.096 % 0.01 V + 0.14 % Fluke 8588A HV Inc. DVR-150, DMM AC Current – Generate & Measure 3 Up to 0.220 mA 2.2 mA (10 to 50) mA (100 to 200) mA (0.5 to 2.0) A (4.0 to 8.0) A (10.0 to 19.0) A Generate: (50 to 1000) A (20 to 3000) A 100 Hz to 10 kHz 100 Hz to 10 kHz 100 Hz to 30 kHz 100 Hz to 30 kHz 10 Hz to 10 kHz 50 Hz to 10 kHz 50 Hz to 5 kHz 60 Hz (50 to 60) Hz 0.19 % 0.20 % 0.09 % 0.50 % 0.10 % 0.11 % 0.11 % 0.20 % 0.94 % Fluke 5730A, Fluke 5725A amplifier Agilent 3458A-02 Fluke 5730A, Agilent 3458A- 02, Fluke 8508A Fluke 5725A amplifier Fluke 5522A Agilent 3458A-02 Fluke multi-turn coils Capacitance – Generate & Measure3 Fixed Points 1.0 pF 10 pF 100 pF 1000 pF 1.0 pF 10 pF 100 pF 1000 pF 1 nF 10 nF 100 nF 1 kHz 1 kHz 1 kHz 1 kHz 300 kHz 300 kHz 300 kHz 300 kHz 1 kHz 1 kHz 1 kHz 0.17 % 0.021 % 0.0017 % 0.0072 % 0.13 % 0.015 % 0.0031 % 0.0001 % 0.087 % 0.011 % 0.010 % Capacitor set, HP 16380A with Keysight E4980AL IET 1413 capacitance decade with Keysight E4980AL

(A2LA Cert. No. 3104.01) 05/29/2025 Page 8 of 13 Parameter/Range Frequency CMC2, 6, 7 (±) Comments Capacitance – Generate & Measure 3 (cont) 1 nF to 10 000 µF At various frequencies ranging anywhere from 20 Hz to 1 kHz 0.62 % Fluke 5522A calibrator with Keysight E4980AL Inductance – Generate & Measure Fixed Points 3 1 mH 100 mH 1 H 20 Hz to 20 kHz 20 Hz to 10 kHz 20 Hz to 1 kHz 0.14 % 0.11 % 0.48 % Genrad 1482 series standard inductors Keysight E4980A LCR meter Parameter/Equipment Range CMC2 (±) Comments Electrical Calibration of Thermocouples – Thermocouple Simulation 3 Generate & Measure E-Type J-Type K-Type T-Type (-250 to -100) °C (-100 to -25) °C (-25 to 350) °C (350 to 650) °C (650 to 1000) °C (-210 to -100) °C (-100 to -30) °C (-30 to 150) °C (150 to 760) °C (760 to 1200) °C (-200 to -100) °C (-100 to -25) °C (-25 to 120) °C (120 to 1000) °C (1000 to 1372) °C (-250 to -150) °C (-150 to 0) °C (0 to 120) °C (120 to 400) °C 0.41 °C 0.18 °C 0.17 °C 0.18 °C 0.21 °C 0.25 °C 0.18 °C 0.17 °C 0.19 °C 0.23 °C 0.29 °C 0.20 °C 0.18 °C 0.24 °C 0.34 °C 0.51 °C 0.23 °C 0.18 °C 0.17 °C Fluke 5522A

(A2LA Cert. No. 3104.01) 05/29/2025 Page 10 of 13 Parameter/Range Frequency CMC2, 6 (±) Comments RF Attenuation Tuned RF Level – Generate & Measure3 (0 to -110) dB 10 MHz 50 MHz 1 GHz 4 GHz 10 GHz 15 GHz 18 GHz 0.41 dB 0.43 dB 0.50 dB 0.35 dB 0.71 dB 1.0 dB 0.45 dB Agilent 8902A-050 measuring receiver Agilent 11793A microwave converter, HP 8496B / 8494B step attenuators with Agilent 11722A sensor with 11792A power sensor IV. Mechanical Parameter/Equipment Range CMC2, 7 (±) Comments Torque Wrench 3 (5 to 200) ozꞏin (5 to 50) lbꞏin (50 to 250) lbꞏin (250 to 1000) lbꞏin (83 to 250) lbꞏft (250 to 1000) lbꞏft 0.44 % 0.43 % 0.40 % 0.36 % 0.41 % 0.35 % CDI torque system Torque Transducer (4.8 to 960) ozf.in (5 to 20) lbf.ft (20 to 200) lbf.ft (200 to 1000) lbf.ft 0.0026 ozf.in + 0.0065 % 0.000 44 lbf.ft + 0.0057 % 0.0062 % 0.012 lbf.ft Torque arms, wheels, & weights

(A2LA Cert. No. 3104.01) 05/29/2025 Page 13 of 13 V. Time & Frequency _________ 1 This laboratory offers commercial calibration service and field calibration service. 2 Calibration and Measurement Capability (CMC) is th e smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. resolution) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer’s site being larger than the CMC. 4 In the statement of CMC, L is the numerical value of the nominal length of the device measured in inches, D is the numerical value of the nominal diameter of the device measured in inches; R is the resolution of the unit under test. 5 The type of instrument or material being calibrate d is defined by the parameter. This indicates the laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated for the listed measurement parameter. 6 The stated measured values are determined using the indicated instrument (see Comments). This capability is suitable for the calibration of the devices intended to measure or generate the measured value in the ranges indicated. CMC’s are expressed as either a specific value that covers the full range or as a percent or fraction of the reading plus a fixed floor specification. 7 The statement of CMC, percenta ges are percentages of reading. 8 This scope meets A2LA’s P112 Flexible Scope Policy. Parameter/Equipment Range CMC2, 5 (±) Comments Frequency – Measuring Equipment & Measure 3 10 MHz Reference 1.0 mHz to 26.5 GHz 4.6 pHz/Hz 36 nHz/Hz Agilent 5071A (cesium beam) Symetricom GPS receiver, Agilent 8340B synthesized sweeper, HP 3325B & HP 5343A frequency counter & time interval counter