Eustis Co., Inc./Pyrocom Calibration

(A2LA Cert. No. 2496.01) 08/15/2024 Page 2 of 4 Parameter/Equipment Range CMC2, 3 (±) Comments Temperature – Measuring Equipment (cont) Calibration of Thermocouples: Type J Type B Type R Type S Type E Type J Type K Type N Type T Type B Type R Type S Type E Type J Type K Type N Type T Type T Type B Type E Type J Type K Type N Type R Type S Type B Type E Type J Type K Type N Type R Type S (0 to 100) °C (25 to 100) °C (101 to 125) °C (101 to 300) °C (126 to 300) °C (301 to 400) °C (301 to 600) °C (601 to 660) °C 0.31 °C 0.67 °C 0.59 °C 0.52 °C 0.27 °C 0.31 °C 0.40 °C 0.33 °C 0.27 °C 0.67 °C 0.60 °C 0.52 °C 0.29 °C 0.33 °C 0.40 °C 0.33 °C 0.29 °C 0.35 °C 0.68 °C 0.30 °C 0.33 °C 0.41 °C 0.33 °C 0.60 °C 0.52 °C 0.85 °C 0.60 °C 0.62 °C 0.66 °C 0.62 °C 0.79 °C 0.73 °C 5628 PRT

(A2LA Cert. No. 2496.01) 08/15/2024 Page 3 of 4 Parameter/Equipment Range CMC2, 3 (±) Comments Temperature – Measuring Equipment (cont) Calibration of Thermocouples: Type B Type E Type J Type K Type N Type R Type S Type E Type B Type J Type K Type N Type R Type S Type B Type K Type N Type R Type S Type B Type K Type N Type R Type S (661 to 700) °C (701 to 800) °C (701 to 1000) °C (1001 to 1100) °C (1101 to 1210) °C 1.1 °C 0.88 °C 0.89 °C 0.92 °C 0.89 °C 1.1 °C 0.98 °C 0.90 °C 1.1 °C 0.91 °C 0.94 °C 0.91 °C 1.1 °C 0.99 °C 1.3 °C 1.2 °C 1.2 °C 1.3 °C 1.2 °C 2.8 °C 2.7 °C 2.7 °C 2.7 °C 2.7 °C Type S thermocouple

(A2LA Cert. No. 2496.01) 08/15/2024 Page 4 of 4 Parameter/Equipment Range CMC2, 3 (±) Comments Temperature – Measuring Equipment Calibration of RTDs: Pt 385, 100 Ω and Pt 392, 100 Ω -196 °C (-196 to -81) °C (-80 to -1) °C (0 to 100) °C (101 to 300) °C (301 to 600) °C (601 to 660) °C 0.12 °C 0.16 °C 0.12 °C 0.13 °C 0.14 °C 0.15 °C 0.54 °C 5628 PRT ___________________________________________ 1 This laboratory offers commercial calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 3 The type of instrument or material being calibrated is defined by the parameter. This indicates the laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated for the listed measurement parameter. 4 This scope meets A2LA’s P112 Flexible Scope Policy.