EN 12504, all parts: Testing concrete in structures32 laboratories in United Kingdom are accredited by UKAS for at least one part of EN 12504. Each lab card shows which parts it holds. These labs commonly handle Drinking water, Ambient air, Concrete matrices. Most frequently tested analytes via this method in United Kingdom: Compressive Strength, Slump, Chloride Content. From the accredited scope text: “EN 12504-1:2019 Laboratory SOILS for civil engineering purposes Water Content - oven drying method BS 1377:Part 2:2022 BS 1377:Part 2:1990 Laboratory Liquid limit - cone penetrometer BS 1377:Part 2:20” “EN 12504-1: 2009 (Withdrawn) BS EN 12504-1:2019 + AC:2020 A” “EN 12504-1:2019 Site Data for pavement assessment – core logging Documented In-house Method DIHM 7, version 3 Laboratory SOILS for civil engineering purposes Moisture content - oven drying method BS 1” “EN 12504-1: 2019 Lab Density BS EN 12390-7: 2019 Lab Flexural strength BS EN 12390-5: 2019 Lab Fibre Content BS EN 14488-7: 2006 Lab Flexural Tensile Strength ((limit of proportionality (LOP), residua”
Tyne & Wear, GB
EN 12504-1:2019 A Sampling of concrete by dust drilling Documented In-House Method No. 112, October 2002 X Depth of carbonation BS EN 14630:2006 X Resistivity Documented In-House Method No. 109, May 2021 X C
Carmarthenshire, GB
EN 12504-1:2019 Laboratory ROCK Point load strength ISRM commission on testing methods. Suggested method for determining point load strength, 1985 Laboratory SOILS for civil engineering purposes Moisture content - o
London, GB
EN 12504-1:2019 Laboratory Depth of penetration of water under pressure BS EN 12390-8 2019 Laboratory CONCRETE, MORTAR AND CEMENT-BASED REPAIR MATERIALS Chloride migration - Nordic test method NT Build 492 Appro
Hertfordshire, GB
EN 12504-1:2019 Site Measurement of layer thickness of bituminous and cementitious materials Documented In-House Method TP 31:2024 Site Visual examination of bituminous and cementitious core samples Documented In-House
Derby, GB
EN 12504-1: 2019 Laboratory Flexural strength BS EN 12390-5:2019 Laboratory Tensile splitting strength BS EN 12390-6:2009 Laboratory Initial surface absorption BS 1881-208:1996 Laboratory Coring BS EN 12504-1:201
London, GB
EN 12504-1: 2009 (Withdrawn) BS EN 12504-1:2019 + AC:2020 A
Co. Fermanagh, GB
EN 12504-1:2019 A Cored specimens - testing in compression BS EN 12504-1:2019 A PAVED SURFACES Pavement surface macrotexture depth using a volumetric patch technique BS EN 13036-1:2010 B Surface regularity usin
Dorset, GB
EN 12504-1:2019 B, X Cored specimens - examining and testing in compression BS EN 12504-1:2019 A, H, X NATURAL STONE Slip resistance by means of the pendulum tester BS EN 14231:2003 A REINSTATEMENT OF OPENINGS IN HIG
Ilkeston, GB
EN 12504-1: 2019 incorporating corrigendum November 2020 Site REINSTATEMENT OF OPENINGS IN HIGHWAYS Sampling of laid and compacted materials by coring BS EN 12697-27: 2017 Site Determination of the thickness of bit
Surrey, GB
EN 12504-1:2019 Woking Birmingham Density BS EN 12390-7:2019 Woking Birmingham CONCRETE - fresh Sampling fresh concrete on site BS EN 12350-1:2019 Site Slump test BS EN 12350-2:2019 Site Flow table test BS
Helensburgh, GB
EN 12504-1:2019 incorporating corrigendum November 2020 Site Sampling of concrete by drilling BS EN 14629:2007 Site Carbonation BS EN 14630:2006 Site CONCRETE - reinforced Location of reinforcement - up to 100
Dukinfield, GB
EN 12504-1:2019 Laboratory SOILS for civil engineering purposes Water Content - oven drying method BS 1377:Part 2:2022 BS 1377:Part 2:1990 Laboratory Liquid limit - cone penetrometer BS 1377:Part 2:2022 BS 1377
Brierley Hill, GB
EN 12504-1:2019 Incorporating corrigendum November 2020 A END
London, GB
EN 12504-1 :2019 Laboratory SOILS for civil engineering purposes Particle size distribution - wet sieving – dry sieving BS 1377-2: 2022 Laboratory Particle size distribution - Hydrometer method BS 1377-2: 2022 La
Cheshire, GB
EN 12504-1: 2019 Incorporating corrigendum November 2020 Site Thickness of a concrete pavement BS EN 13863-3:2004 Laboratory Site REINSTATEMENT OF OPENINGS IN HIGHWAYS Pavement construction Methods of test required
Staffordshire, GB
EN 12504-1:2019 Site Cored specimens - examining and testing in compression BS EN 12504-1:2019 Lab Fibre content of fibre reinforced concrete - hardened sample BS EN 14488-7:2006 Method A Lab Test method for metall
Falkirk, GB
EN 12504-1:2019 Site Data for pavement assessment – core logging Documented In-house Method DIHM 7, version 3 Laboratory SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990
Leicester, GB
EN 12504-1: 2019 Lab Density BS EN 12390-7: 2019 Lab Flexural strength BS EN 12390-5: 2019 Lab Fibre Content BS EN 14488-7: 2006 Lab Flexural Tensile Strength ((limit of proportionality (LOP), residual) BS E
Kenilworth, GB
EN 12504-1:2019 Site Visual & delamination survey Documented In-House Method CRLS STP 01 & STP 02 Site Carbonation BS EN 14630:2006 Site Resistivity BRE Digest 434 Concrete Society Technical Report No. 60 Site
Bristol, GB
EN 12504-1:2019 Laboratory ROCK Water content The Complete ISRM Suggested Methods for Rock Characterisation, Testing and Monitoring: 1974-2006. Editors: R Ulusay & J A Hudson Laboratory Uniaxial compressive strength
Glasgow, GB
EN 12504-1:2019 A X
Gwynedd, GB
EN 12504-1:2019 B Cored specimens - examining BS EN 12504-1:2019 A Cored specimens - testing in compression BS EN 12504-1:2019 A ChlorIde content BS 1881-124:2015 A Chloride content - potentiometric method Do
Glasgow, GB
EN 12504-1:2019 A Compressive strength of cubes BS EN 12390-3:2019 A Curing BS EN 12390-2:2019 A Shape, dimensions BS EN 12390-1:2021 A Density BS EN 12390-7:2019+AC:2020 A ROCK Uniaxial compressive strength
Bedfordshire, GB
EN 12504-1:2019 A Gas permeability and diffusion coefficients Documented In-House Method No TP1303/90/4672 A Determination of the chloride resistance of concrete, unidirectional diffusion BS EN 12390-11:2015 A De
Glasgow, GB
EN 12504-1:2019 A Curing BS EN 12390-2:2019 A, C*, D*, F*, G*, J*, K*, Flexi Measuring the fibre content in fresh and hardened concrete BS EN 14721:2005+A1:2007 C* MORTARS and GROUTS - hardened Curing BS 4551
East Goscote, GB
EN 12504-1:2019 Site Compressive strength of cubes - including curing BS EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Leicester Brandon Acton Density BS EN 12390-7:2019+AC 2020 Leicester Brandon Acton
Hertfordshire, GB
EN 12504-1: 2019 Incorporating corrigendum November 2020 B Thickness of a concrete pavement BS EN 13863-3:2004 A Data for pavement assessment – core logging Design Manual for Roads and Bridges, CS 229, Rev. 0, March 2
North Lincolnshire, GB
EN 12504-1:2019 Site END
Coventry, GB
EN 12504-1:2019 B Cored specimens - examining and testing in compression BS EN 12504-1:2019 BS EN 12390-1:2021 BS EN 12390-3:2019 A Water absorption BS 1881-122:2011+A1:2020 A Density BS EN 12390-7:2019 A
West Sussex, GB
EN 12504-1:2019 Site BITUMINOUS MIXTURES for roads and other paved areas Bulk density - sealed specimen BS EN 12697-6:2020 A Maximum density - volumetric procedure BS EN 12697-5:2018 A Air voids content BS EN 1
London, GB
EN 12504-1:2019 including corrigendum November 2020 Laboratory Density BS EN 12390-7:2019 including corrigendum November 2020 Laboratory Concrete rebound number BS EN 12504-2:2021 Site MORTARS, SCREEDS and PLASTERS
West Yorkshire, GB
EN 12504-1:2019 Site Sampling by core drilling – 50 – 150mm diameter Documented In-House Method SOP 08 Site END
This page is a fixed slice of the register: every EN 12504 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.