EN 12697, all parts: Bituminous mixtures - Test methods35 laboratories in United Kingdom are accredited by UKAS for at least one part of EN 12697. Each lab card shows which parts it holds. These labs commonly handle Drinking water, Ambient air, Concrete matrices. Most frequently tested analytes via this method in United Kingdom: Particle Size Distribution, Air Voids Content, Binder Content. From the accredited scope text: “EN 12697-6:2012 Laboratory Air void content BS EN 12697-8: 2018 Laboratory Determination of the thickness of a bituminous pavement - destructive measurement BS EN 12697-36:2022 Laboratory Pavement sur” “EN 12697-27: 2019 BS 594987:2024 Site Thickness of a bituminous pavement BS EN 12697-36: 2022 Laboratory Site Sample preparation ADEPT Guidance Note December 2024 Appendix C Clauses C 1.0 – 5.0 Labora” “EN 12697-1:2020 A Particle size distribution BS EN 12697-2:2015+A1:2019 A Maximum density - volumetric procedure BS EN 12697-5:2018 A Bulk density - dry - saturated surface dry (SSD) - sealed specimen” “EN 12697-32:2019 Lab Laboratory mixing BS EN 12697-35:2016 Lab Resistance to permanent deformation – unconfined dynamic loading (RLAT) BS DD 226:1996 (withdrawn) Lab Resistance to permanent deformatio”
Northamptonshire, GB
EN 12697-13:2017 Incorporating corrigendum July 2022 Site Temperature of bituminous mixtures - infrared thermometer method - In a heap - In a paver BS EN 12697-13:2017 Incorporating corrigendum July 2022 Site Sampli
Merseyside, GB
EN 12697-5:2018 A Bulk density - dry - saturated surface dry (SSD) - sealed specimen - by dimensions BS EN 12697-6:2020 A Air voids content BS EN 12697-8:2018 A Sampling - from around the augers of the paver
East Kilbride, GB
EN 12697-27:2017 X Sampling of finished material - core cutting method BS EN 12697-27:2017 X Sampling coated chippings from stockpiles BS EN 12697-27:2017 X Preparation of samples for the determination of binder c
North Lincolnshire, GB
EN 12697-27:2017 Site Soluble binder content by recovery using bottle rolling machine, bucket centrifuge type 1 and volume calculation BS EN 12697-1:2020 Laboratory Particle size distribution BS EN 12697-2:2024 Laboratory
Hertfordshire, GB
EN 12697-36:2022 Site REINSTATEMENT OF OPENINGS IN HIGHWAYS Sampling of finished material - core cutting method BS EN 12697-27:2017 Site Taking cores BS EN 12504-1:2019 Site Measurement of layer thickness of bitum
Derby, GB
EN 12697-5:2018 Laboratory Bulk Density - dry - saturated surface dry (SSD) - sealed specimen - bulk density by dimensions BS EN 12697-6:2020 Laboratory Air Voids Content BS EN 12697-8: 2018 Laboratory Sampling of laid
Hertfordshire, GB
EN 12697-1:2020 D Particle size distribution BS EN 12697-2:2015+A1:2019 D Maximum density - volumetric procedure BS EN 12697-5: 2018 D Bulk density - dry - saturated surface dry (SSD) - sealed specimen BS EN
Co. Fermanagh, GB
EN 12697-1:2020 A Soluble binder content by recovery, using bottle rotation machine, bucket centrifuge type 2 and volume calculation BS EN 12697-1:2020 A Particle size distribution BS EN 12697- 2:2015+A1:2019 A De
Kent, GB
EN 12697-1:2020 Lenham Determination of Particle Size Distribution BS EN 12697-2:2015 +A1:2019 Lenham Measurement of Temperature; From heaps and from laid material BS EN 12697-13:2017 Site Estimated Density of Compacted
Dorset, GB
EN 12697-1:2020 A Particle size distribution BS EN 12697-2:2015+A1:2019 A Maximum density - volumetric procedure BS EN 12697-5:2018 A Bulk density - dry - saturated surface dry (SSD) - sealed specimen BS EN 12697-
Newcastle Upon Tyne, GB
EN 12697-27:2017 Site Temperature of bituminous mixtures - in the hopper of a paver - in the augers of a paver - in laid-but-not-rolled material BS 598-1: 2011 Site Temperature measurement - Measurement material tem
Ilkeston, GB
EN 12697-27: 2017 Site Determination of the thickness of bituminous pavement - destructive method BS EN 12697-36: 2022 Laboratory END
Dukinfield, GB
EN 12697-1:2020 Laboratory Particle size distribution BS EN 12697-2: 2015+A1:2019 Laboratory Maximum density - volumetric procedure BS EN 12697-5:2018 Laboratory Bulk density - dry - saturated surface dry - sea
Cheshire, GB
EN 12697-27: 2019 BS 594987:2024 Site Thickness of a bituminous pavement BS EN 12697-36: 2022 Laboratory Site Sample preparation ADEPT Guidance Note December 2024 Appendix C Clauses C 1.0 – 5.0 Laboratory Site
Staffordshire, GB
EN 12697-32:2019 Lab Laboratory mixing BS EN 12697-35:2016 Lab Resistance to permanent deformation – unconfined dynamic loading (RLAT) BS DD 226:1996 (withdrawn) Lab Resistance to permanent deformation – unconfined
Falkirk, GB
EN 12697-27:2017 Site - of laid and compacted materials by coring Determination of the thickness of a bituminous pavement BS EN 12697-36:2022 Laboratory Site ROAD PAVEMENT SURFACES Pavement surface macrotextu
Derby, GB
EN 12697-32:2019 A Determination of the thickness of a bituminous pavement. BS EN 12697-36:2022 A Rate of spread of binder - carpet tile method: BS EN 12272-1:2002 X ROAD PAVEMENT SURFACES Core Logging Design
Leicester, GB
EN 12697-13: 2017 Contact method Site Temperature measurement - Measurements of temperature in a heap - Measurements of temperature in a paver hopper BS EN 12697-13:2017 Infrared-thermometer Site Sampling from - a
Sittingbourne, GB
EN 12697-1:2020 A Particle size distribution BE EN 12697-2:2015 + A1:2019 A Air voids content BS EN 12697-8:2018 A Maximum density - volumetric procedure BS EN 12697-5:2018 A Bulk density - dry - saturate
Daventry, GB
EN 12697-27:2017 S Determination of Pavement Thickness BS EN 12697-36:2022 A END
Kent, GB
EN 12697-13:2017 Site Measurements of temperature of materials – Infra-red theremometer - in a heap - paver hopper BS EN 12697-13:2017 Site Sampling from - around the augers of the paver - workable material in heaps
Glasgow, GB
EN 12697-13:2017 X Maximum density-volumetric procedure BS EN 12697-5:2018 A Bulk density - dry BS EN 12697-6:2020 A Bulk density - saturated surface dry (SSD) BS EN 12697-6:2020 A Bulk density - sealed spec
Gwynedd, GB
EN 12697-19:2020 C Wheel tracking using a small size device and procedure A BS EN 12697-22:2020+A1:2023 C Wheel tracking using a small size device and procedure B in air BS EN 12697-22:2020+A1:2023 C Indirect
Glasgow, GB
EN 12697-37:2022 A CONCRETE – hardened Compressive strength of cores BS EN 12504-1:2019 A Compressive strength of cubes BS EN 12390-3:2019 A Curing BS EN 12390-2:2019 A Shape, dimensions BS EN 12390-1:2021 A
Ashover, GB
EN 12697-27:2017 X ROAD PAVEMENT SURFACES Surface macrotexture depth by volumetric patch technique BS EN 13036-1:2010 X Determination of in-situ density – non nuclear method BS EN 594987:2015 +A1:2017 ANNEX 1
East Goscote, GB
EN 12697-3:2013 +A1:2018 Leicester Soluble binder content by difference, using bottle rotation machine and pressure filter BS EN 12697-1:2020 Leicester Soluble binder content by difference, using the automatic extractor m
Hertfordshire, GB
EN 12697-35:2016 A areas (cont’d) Thickness of a bituminous pavement BS EN 12697-36: 2022 B Sensitivity to water Guidelines document for the assessment and certification of thin surfacing systems for highways - Appendix A.2:2
Ashburton, GB
EN 12697-28: 2020 Laboratory, Site Bulk density - saturated surface dry (SSD) BS EN 12697-6: 2020 Laboratory Bulk density - sealed specimen BS EN 12697-6: 2020 Laboratory Core logging DIHM 100
Northern Ireland, GB
EN 12697-2:2024 A Determination of the maximum density (procedure A) BS EN 12697-5:2018 A Determination of Bulk Density of Bituminous Specimens BS EN 12697-6:2020 A Determination of Void Characteristics of Bituminous S
Northern Ireland, GB
EN 12697-2:2024 A Sampling - from around the augers of a paver; - from workable material in heaps; - of finished material; core cutting method; - coated chippings from stockpil
Devon, GB
EN 12697-6:2012 Laboratory Air void content BS EN 12697-8: 2018 Laboratory Determination of the thickness of a bituminous pavement - destructive measurement BS EN 12697-36:2022 Laboratory Pavement surface macrotextu
West Sussex, GB
EN 12697-6:2020 A Maximum density - volumetric procedure BS EN 12697-5:2018 A Air voids content BS EN 12697-8:2018 A
Hertfordshire, GB
EN 12697-5:2018 A Bulk density - dry - saturated surface dry (SSD) - sealed specimen BS EN 12697-6:2020 A Air voids content BS EN 12697-8:2018 A ROAD PAVEMENT MATERIALS Dimensional measurement of bituminous and co
West Yorkshire, GB
EN 12697-5:2018 Laboratory Bulk density : Procedure C Sealed specimen BS EN 12697-6:2012 BS EN 12697-6:2020 Laboratory Air voids content BS EN 12697-8:2018 Laboratory Determination of the thickness of a bituminou
Bristol, GB
EN 12697-27:2017 C Air voids content (in-situ) using non-nuclear indirect density gauge Specification for Highway Works HMSO May 2018 Clause 929 and BS 594987:2015+A1:2017 Annex I C ROAD PAVEMENT SURFACES Pavement s
This page is a fixed slice of the register: every EN 12697 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.