MATtest Site Services
East Kilbride, GB
Scope
EN 12697-36:2003 C Measurements of temperature BS EN 12697-13:2017 X
View lab
ISO/IEC 17025 directory · Part of the EN 12697 series
EN 12697-36 Accredited Testing Labs in United Kingdom
20 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN 12697-36 testing. These labs commonly handle Drinking water, Ambient air, Concrete matrices. Most frequently tested analytes via this method in United Kingdom: Pah. From the accredited scope text: “EN 12697-36:2022 Laboratory Pavement surface macrotexture depth using a volumetric patch technique BS EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Wo” “EN 12697-36: 2022 Laboratory Site Sample preparation ADEPT Guidance Note December 2024 Appendix C Clauses C 1.0 – 5.0 Laboratory Site Bulk density - by dimensions BS EN 12697-6:2020 Laboratory Dimensi” “EN 12697-36:2003 Lab BITUMINOUS ROAD SURFACING In-situ density - nuclear method Documented In-House Method No DIHM 120 based upon TRRL SR 754:1982 Site Rate of spread of chippings for mechanical chipp” “EN 12697-36:2022 F, H, X Measurements of temperature - in a wagon Documented In-House Method In-situ Works Procedures Manual Section 5 Number 1 B, X PAH screening by PAK marker Managing reclaimed asph”
- Labs
- 20
- Top matrix
- Drinking water10 labs
- Top analyte
- Pah3 labs
- Primary AB
- UKAS20 labs
Part of a series
See all 35 labs in United Kingdom for EN 12697 (any part)
Part 1: 15 labs · Part 2: 17 labs · Part 3: 3 labs · Part 5: 23 labs · Part 6: 23 labs · Part 8: 19 labs and 25 more parts
Accredited Labs
Humberside Materials
North Lincolnshire, GB
Scope
EN 12697-36:2022 Laboratory CONCRETE - hardened Compressive strength of cubes - including curing BS EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory
View lab
Corehard
Hertfordshire, GB
Scope
EN 12697-36:2022 Site REINSTATEMENT OF OPENINGS IN HIGHWAYS Sampling of finished material - core cutting method BS EN 12697-27:2017 Site Taking cores BS EN 12504-1:2019 Site Measurement of layer thickness of bitum
View lab
ACS Testing Limited also trading as XtraTec
Dorset, GB
Scope
EN 12697-36:2022 F, H, X Measurements of temperature - in a wagon Documented In-House Method In-situ Works Procedures Manual Section 5 Number 1 B, X PAH screening by PAK marker Managing reclaimed asphalt, Hig
View lab
Structural Investigation Services Limited trading as SIS Group
Ilkeston, GB
Scope
EN 12697-36: 2022 Laboratory END
View lab
Murray Rix (Northern)
Dukinfield, GB
Scope
EN 12697-36:2022 Laboratory
View lab
National Testing Services Limited trading as National Testing
Cheshire, GB
Scope
EN 12697-36: 2022 Laboratory Site Sample preparation ADEPT Guidance Note December 2024 Appendix C Clauses C 1.0 – 5.0 Laboratory Site Bulk density - by dimensions BS EN 12697-6:2020 Laboratory Dimensions of a bit
View lab
SOCOTEC UK
Staffordshire, GB
Scope
EN 12697-36:2003 Lab BITUMINOUS ROAD SURFACING In-situ density - nuclear method Documented In-House Method No DIHM 120 based upon TRRL SR 754:1982 Site Rate of spread of chippings for mechanical chipping spreaders BS
View lab
Trojan Construction Testing Services
Falkirk, GB
Scope
EN 12697-36:2022 Laboratory Site ROAD PAVEMENT SURFACES Pavement surface macrotexture depth using a volumetric patch technique BS EN 13036-1:2010 Site Surface regularity using a rolling straight-edge. Specificati
View lab
MATtest Laboratories Limited
Derby, GB
Scope
EN 12697-36:2022 A Rate of spread of binder - carpet tile method: BS EN 12272-1:2002 X ROAD PAVEMENT SURFACES Core Logging Design Manual for Roads and Bridges, CS 229 Revision 0, March 2020 A In-situ density
View lab
Construction Testing Solutions
Leicester, GB
Scope
EN 12697-36: 2022 Site Compacted Density - nuclear density method Documented In-House Method TP50 Issue 1 Site Compacted Density - non nuclear method Documented In-House Method TP 91 Issue1 Site BITUMINOUS ROAD
View lab
DMH Testing
Daventry, GB
Scope
EN 12697-36:2022 A END
View lab
DGL Testing Services
Kent, GB
Scope
EN 12697-36:2022 Laboratory BITUMINOUS ROAD SURFACING In-situ density - Dielectric method BS 594987:2015+A1:2017 Annex I and Documented In-House Method No STOP 17.0, October 2010 Site In-situ density - Nuclear gaug
View lab
Stanger Testing Services
Glasgow, GB
Scope
EN 12697-36:2022 X ROCK Water absorption BS EN 13383-2:2019 A Uniaxial compressive strength BS EN 1926:2006 A SOILS for civil engineering purposes Water content - oven drying method BS 1377-2:2022 A Flexi Liqui
View lab
Celtest Company
Gwynedd, GB
Scope
EN 12697-36:2022 C, LHR, X Hot sand test for the adhesivity of binder on precoated chippings for HRA BS EN 12697-37:2022 C In-situ drainability BS EN 12697-40:2020 B Amount of coarse foreign matter in reclaimed asph
View lab
Simtec Materials Testing
East Goscote, GB
Scope
EN 12697-36:2022 Leicester Rate of spread of binder - carpet tile method BS EN 12272-1:2002 Site ROAD PAVEMENT SURFACES Rate of spread of chippings for mechanical chipping spreaders BS 598-1:2011 Site Textur
View lab
JEAN LEFEBVRE (UK)
Hertfordshire, GB
Scope
EN 12697-36: 2022 B Sensitivity to water Guidelines document for the assessment and certification of thin surfacing systems for highways - Appendix A.2:2011 A Modified Leutner Test Specification for Highway Works Vol. 1
View lab
Tonkin Materials Testing
Devon, GB
Scope
EN 12697-36:2022 Laboratory Pavement surface macrotexture depth using a volumetric patch technique BS EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2
View lab
Highway Quality Solutions
West Sussex, GB
Scope
EN 12697-36:2022 A Sampling of hardened concrete by coring BS EN 12504-1:2019 Site BITUMINOUS MIXTURES for roads and other paved areas Bulk density - sealed specimen BS EN 12697-6:2020 A Maximum density - volume
View lab
M & G Investments Ltd t/a Trench-Right
West Yorkshire, GB
Scope
EN 12697-36:2022 Laboratory Sampling laid and compacted materials by coring BS EN 12697-27:2017 Site PAH screening by PAK marker ADEPT Guidance Note 2019/8 Appendix D 2.0 Laboratory Thickness of a Concrete Pavemen
View lab
Refine these results
This page is a fixed slice of the register: every EN 12697-36 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomTop matrices for EN 12697-36 in United Kingdom
Top analytes for EN 12697-36 in United Kingdom
- Pah3
- Particle Size Distribution2
- Air Voids Content2
- Moisture Content2
- Bulk Density1
About ISO/IEC 17025 in United Kingdom
United Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.