5 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform ISO 16750-3 testing. From the accredited scope text: “ISO 16750-3:2023 Tests III, IX ISO 16750-3:2012 Tests III, IX (Table 16) QS000296:Issue 01 In house procedure for combined climatic and dynamic testing IEC EN 60068-2-64:2008+A1:2019 IEC EN 60068-2-64” “ISO 16750-3:2023 ELECTRICAL/ELECTRONIC Vibration - Sinusoidal BS 2011:Fc:1983(1986) PRODUCTS AND COMPONENTS BS EN 60068-2-6:1996 Freq range: 2 to 2000 Hz BS EN 60068-2-6:2008 ELECTRICAL/ELECTRONIC BS” “ISO 16750-3:2007 ISO 16750-3:2012 ISO 16750-3:2023 Slip table size: RTCA/DO-160C:1989 (EUROCAE ED-14C) As listed on Page 12 750 mm x 750 mm RTCA/DO-160D:1997 (EUROCAE ED-14D) RTCA/DO-160E:2004 RTCA/DO” “ISO 16750-3:2012 BS ISO 16750-3:2023 EN ISO 13628-6:2006 HIGH IMPACT SHOCK AND BUMP BS EN 60068-2-27:2009 Max shock: 2100g Duration : 0.8ms Max mass of test item : 13kg DEF STAN 00-35 (Part 3) Issue 4”
Northamptonshire, GB
ISO 16750-3: 2012 Section 4.1 ISO 16750-3: 2023 Section 4.1 Acceleration up to 100g peak Velocity up to 2.0 m/s peak ST/SG/AC.10/11/Rev.7/Amend.1 UN 38.3 section 38.3.4.3 T3 UNECE Regulation 100.3 Displacement up to 76.2 m
Suffolk, GB
ISO 16750-3:2023 ELECTRICAL/ELECTRONIC Vibration - Sinusoidal BS 2011:Fc:1983(1986) PRODUCTS AND COMPONENTS BS EN 60068-2-6:1996 Freq range: 2 to 2000 Hz BS EN 60068-2-6:2008 ELECTRICAL/ELECTRONIC BS EN 60068-2-50:200 CONNECTORS Pe
West Midlands, GB
ISO 16750-3:2007 ISO 16750-3:2012 ISO 16750-3:2023 Slip table size: RTCA/DO-160C:1989 (EUROCAE ED-14C) As listed on Page 12 750 mm x 750 mm RTCA/DO-160D:1997 (EUROCAE ED-14D)
Devon, GB
ISO 16750-3:2012 BS ISO 16750-3:2023 EN ISO 13628-6:2006 HIGH IMPACT SHOCK AND BUMP BS EN 60068-2-27:2009 Max shock: 2100g Duration : 0.8ms Max mass of test item : 13kg DEF STAN 00-35 (Part 3) Issue 4 DEF STAN 00-035 (Par
Northern Ireland, GB
ISO 16750-3:2023 Tests III, IX ISO 16750-3:2012 Tests III, IX (Table 16) QS000296:Issue 01 In house procedure for combined climatic and dynamic testing IEC EN 60068-2-64:2008+A1:2019 IEC EN 60068-2-64:2008 IEC EN 60068-2-64:1995
This page is a fixed slice of the register: every ISO 16750-3 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.