ISO 717, all parts: Acoustics - Rating of sound insulation in buildings and of building elements23 laboratories in United Kingdom are accredited by UKAS for at least one part of ISO 717. Each lab card shows which parts it holds. These labs commonly handle Air matrices. Most frequently tested analytes via this method in United Kingdom: Level Difference, Impact Sound Pressure Level. From the accredited scope text: “ISO 717-2:1997 (Withdrawn) A Laboratory measurement of airborne and impact sound insulation of building elements BS EN ISO 10140-2:2021 BS EN ISO 717-1:2020 BS EN ISO 10140-3:2021 BS EN ISO 717-2:2020” “ISO 717-1:2020 BS EN ISO 717-2:2020 Lab Floor Coverings BS EN ISO 10140-1:2021 (Annex H) Laboratory measurement of improvement of impact sound insulation BS EN ISO 10140-3:2021 BS EN ISO 717-2:2020 La” “ISO 717-1:1997 (Withdrawn) Sound Insulation tests including pre- completion testing for dwellings and rooms for residential purpose for The Building Regulations 2010. Approved Document E (2003 Edition” “ISO 717-1:1997 (Withdrawn) 50 Hz – 5 KHz Building Bulletin 93 – Version 17 Feb 2015 Tables 3a & 3b 50 Hz – 5 KHz HTM 08-01 - 2013 50 Hz – 5 KHz BS EN ISO 16283-1:2014+A1:2017 BS EN ISO 717-1:2020 Buil”
Suffolk, GB
ISO 717-2:2020 50 Hz to 5 KHz BS EN ISO 140-7:1998 (Withdrawn) BS EN ISO 717-2:1997 (Withdrawn) Site Rooms Field measurements of reverberation time Building Bulletin 93 – Version 17 Feb 2015 Tables 6 & 7 Site
Brighton, GB
ISO 717-1:1997 Site Floors Field measurement of impact sound insulation of floors between rooms, ie Impact Sound Pressure Level and related factors Sound insulation tests including pre-completion testing for dwellings and r
Bristol, GB
ISO 717-2:1997 (Withdrawn) BS EN ISO 16283-2:2020 BS EN ISO 717-2:2020 A END
West Yorkshire, GB
ISO 717-1:1997 (Withdrawn) Sound Insulation tests including pre- completion testing for dwellings and rooms for residential purpose for The Building Regulations 2010. Approved Document E (2003 Edition incorporating 2004, 2010, 2013
Surrey, GB
ISO 717-1:1997 (Withdrawn) Sound Insulation tests including pre- completion testing for dwellings and rooms for residential purpose for The Building Regulations 2010. Approved Document E (2003 Edition incorporating 2004 & 2010 amendme
Chester, GB
ISO 717-1:1997 (Withdrawn) Site Floors Field measurement of impact sound insulation of floors between rooms, ie, Impact Sound Pressure Level and related factor Sound insulation tests including pre-completion testing for dwel
Ipswich, GB
ISO 717-2 :1997 (Withdrawn) Site 50 Hz to 5 kHz BS EN ISO 16283-2 :2015 (Withdrawn) BS EN ISO 16283-2 :2018 (Withdrawn) BS EN ISO 16283-2 :2020 BS EN ISO 717-2 :2013 (Withdrawn) BS EN ISO 717-2 :2020 Site Rooms Field
Berkshire, GB
ISO 717-2:1997 BS EN ISO 16283-2:2015 END
Derbyshire, GB
ISO 717-1:1997 (Withdrawn) Building Bulletin 93:2003 (Withdrawn) HTM 08-01 Site Floors Field measurement of impact sound insulation of floors between rooms, ie Impact Sound Pressure Level and related factors Sound insulation
Leicestershire, GB
ISO 717-1:2020 A BUILDING ELEMENTS Floors BS EN ISO 10140- 1:2021 (Annex F) Laboratory measurement of airborne and impact sound insulation of building elements BS EN IS
Ipswich, GB
ISO 717-2:1997 (Withdrawn) BS EN ISO 717-2:2013 (Withdrawn) BS EN ISO 717-2:2020 Building (Scotland) Regulations 2004. Technical Handbook (Domestic) 2022, Section 5 Noise. Technical Handbook (Non- Domestic) 2022, Section 5 No
North Yorkshire, GB
ISO 717-1:2020 Laboratory measurement of impact sound insulation of building elements BS EN ISO 10140-3:2021 BS EN ISO 717-2:2020 The property measured is the Sound Reduction Index over the minimum frequency range of
Merseyside, GB
ISO 717-1:1997 Site Floors Field measurement of impact sound insulation of floors between rooms, i.e. Impact Sound Pressure Level and related factors Sound insulation tests including pre-completion testing for dwellings and ro
Hertfordshire, GB
ISO 717-1:2020 BS EN ISO 717-2:2020 Lab Floor Coverings BS EN ISO 10140-1:2021 (Annex H) Laboratory measurement of improvement of impact sound insulation BS EN ISO 10140-3:2021 BS EN ISO 717-2:2020 Lab Road Traffic N
Essex, GB
ISO 717-2:2020 Rooms Field measurements of reverberation time 50 Hz – 5 KHz Building Bulletin 93 – Version 17 Feb 2015 Tables 6 & 7 50 Hz – 5 KHz HTM 08-01 - 2013 50 Hz – 5 KHz BS EN ISO 3382-2:2008 Internal am
Essex, GB
ISO 717-1:1997 ISO 717-1:1996 A Floors Field measurement of impact sound insulation of floors between rooms, i.e. Impact Sound Pressure Level and related factors Sound insulation tests including pre-completion testing for dw
Watford, GB
ISO 717-1:2020 A BUILDING ELEMENTS Floors BS EN ISO 10140- 1:2021 (Annex F) Laboratory measurement of airborne and impact sound insulation of building elements BS EN ISO 10140-2:2021 BS EN ISO 717-1:2020 BS EN ISO 10140-
Co. Fermanagh, GB
ISO 717- 1:1997(Withdrawn) Site 50 Hz to 5 KHz BS EN ISO 16283-1:2014 BS EN ISO 717-1:2013 Site Floors Field measurement of impact sound insulation of floors between rooms, i.e. Impact Sound Pressure Level and related f
West Sussex, GB
ISO 717-1:1997 (Withdrawn) Site Floors Field measurement of impact sound insulation of floors between rooms, ie Impact Sound Pressure Level and related factors Sound insulation tests including pre-completion testing for dwel
London, GB
ISO 717-1:1997 (Withdrawn) Site Floors Field measurement of impact sound insulation of floors between rooms, i.e. Impact Sound Pressure Level and related factors Sound insulation tests including pre-completion testing for dwe
Suffolk, GB
ISO 717-2:1997 (Withdrawn) A Laboratory measurement of airborne and impact sound insulation of building elements BS EN ISO 10140-2:2021 BS EN ISO 717-1:2020 BS EN ISO 10140-3:2021 BS EN ISO 717-2:2020 A ACOUSTICAL LINI
This page is a fixed slice of the register: every ISO 717 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.