13 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM A604 testing. From the accredited scope text: “ASTM A604, ASTM E340, ASTM E381; AWS D1.2/D1.2M (Clause 3), D1.5M/D1.5 (Clause 5), D1.6/D1.6M (Clause 4), D14.1/D14.1M (Clause 9); ISO 15614-1, ISO 17639, AWS D1.1/D1.1M, API 1104; EN 287, EN 288, EN” “ASTM A604, E381 Inclusion content ASTM E45 Grain Size ASTM E112, E930 Intergranular Corrosion ASTM A262 (Practices A and E) Alpha Case Depth MIL-F-83142 (Paragraph 3.2.3) Depth of Decarburization ASTM” “ASTM A604/A604M; AWS B4.0 Preparation of Samples ASTM E3” “ASTM A604, ASTM E340, ASTM E381; SAE J123, SAE J1061 Microscopic Examination by Etching AMS 2643; ASTM E407 Microstructure ISO 20160; SOP 60.002 Nitriding SOP 60.702 Oxidation / Corrosion SOP 60.502 P”
Euless, TX, US
ASTM A604/A604M, ASTM E340, ASTM E381; AMS 6400 Corrosion Susceptibility ASTM A262 (Rapid Screening), ASTM A923 (Methods A & B) Volume Percent ASTM E562 IGA, Eutectic Melting, HTO BPS 4139; BHT LTI-1005; BAC 5602; STP54-101;
Houston, TX, US
ASTM A604, ASTM E340, ASTM E381; AWS D1.2/D1.2M (Clause 3), D1.5M/D1.5 (Clause 5), D1.6/D1.6M (Clause 4), D14.1/D14.1M (Clause 9); ISO 15614-1, ISO 17639, AWS D1.1/D1.1M, API 1104; EN 287, EN 288, EN 1321 ASTM E407, ASTM E3; BS EN 31
Daleville, IN, US
ASTM A604, ASTM E340, ASTM E381 Microetching ASTM E407
South Gate, CA, US
ASTM A604, E381 Inclusion content ASTM E45 Grain Size ASTM E112, E930 Intergranular Corrosion ASTM A262 (Practices A and E) Alpha Case Depth MIL-F-83142 (Paragraph 3.2.3) Depth of Decarburization ASTM E1077 Determination of Delta
West Boylston, MA, US
ASTM A604, E381, E340 Microetch ASTM E407 Metallurgical Preparation / Microphotography ASTM E3, E883 Photomicrography ASTM E883 Oxide Coating by Cross Section ASTM B487 Percent Ferrite Determination ASTM A923, E562; AMS
Erie, PA, US
Test: Test Methods: Metallographic Evaluation: Preparation ASTM E3 Conductivity AMS 2658 Decarburization ASTM E1077, ASTM F2328 Case Depth SAE J423 Ferrite Rating AMS 2315; ASTM E562 Grain Size (Comparison Method Only) ASTM E112
Huntington Beach, CA, US
ASTM A604, ASTM E340, ASTM E381; SAE J123, SAE J1061 Microscopic Examination by Etching AMS 2643; ASTM E407 Microstructure ISO 20160; SOP 60.002 Nitriding SOP 60.702 Oxidation / Corrosion SOP 60.502 Porosity ASTM E1245 Scanning Ele
Gary, IN, US
Test Test Method(s) Metallographic Evaluation continued Macroetching ASTM E340, E381, A604/A604M Microetching ASTM E407 Depth of Decarburization ASTM E1077; SAE J419 Case Depth SAE J423 Plating Thickness ASTM B487 Corrosion ASTM A262
Hatfield, PA, US
T e s t : Test Method(s): Hardness1: Brinell (500, 1000, 1500 & 3000 kg) ASTM E10 Rockwell (A, B, C, E, F) ASTM E18; NASM-1312-6 Superficial (15, 30, 45 N & T) ASTM E18; NASM-1312-6 Vickers (5kg, 10kg, 20kg) ASTM E92 Micro
Youngstown, PA, US
Test: Test Method(s): Metallurgical Exam Preparation of Specimens ASTM E3 Microetching and Identification of Microstructures ASTM E407; ASM Metals Handbook Vol. 9; WMT&R-70141 Alpha Case WMTR-70031; GE P3TF19, GE P3TF32, EN 2003-9 D
Phoenix, AZ, US
ASTM A604, E340, E381 Magnetic Particle: Bench: Visible and/or Fluorescent AMS 2301, 2304; JIS G 0556 Measurements of plating thickness by Optical Microscope ASTM B487 Micro-Cleanliness Rating ASTM E45 (Methods A, C, D,
St. Paul, MN, US
ASTM A604/A604M, E340, E381, F788; ISO 6157-1, 6157-3 Measurement of Coating Thickness ASTM B487 (Using Computer Imaging) Microetching AMS 2643; ASTM E3, E407 Metals and Metal Products, Fasteners: Axial Tensile Strength
Greendale, WI, US
ASTM A604/A604M; AWS B4.0 Preparation of Samples ASTM E3
This page is a fixed slice of the register: every ASTM A604 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.