10 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM C518 testing. From the accredited scope text: “ASTM C518 Steady-State Thermal Transmission Properties by Means of The Heat Flow Meter Apparatus ASTM C273 Shear Properties of Sandwich Core Materials ASTM D638 Tensile Properties of Plastics ASTM D79” “ASTM C518 Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus ASTM C612 Standard specification for mineral fiber block and board thermal ins” “ASTM C518 Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus CAN/ULC 701.1 Standard for Thermal Insulation, Polystyrene Boards CAN/ULC 702.” “ASTM C518 Mass and Volume ASTM D471 Density and Specific Gravity ASTM D792 Coatings Condensation Adhesion Visual Assessment Water Immersion Cathodic Disbondment UV Accelerated weathering Coating thick”
Houston, TX, US
ASTM C518 Mass and Volume ASTM D471 Density and Specific Gravity ASTM D792 Coatings Condensation Adhesion Visual Assessment Water Immersion Cathodic Disbondment UV Accelerated weathering Coating thickness ISO 627
Upper Marlboro, MD, US
ASTM C518 Standard Test Method for Steady-state Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ASTM C653 Standard Guide for Determination of the Thermal Resistance of Low-density Blanket-type Mineral Fiber
Sacramento, CA, US
ASTM C518
Hunt Valley, MD, US
ASTM C518; ASTM E1530 Viscosity ASTM D1084; IPC-TM-650 (Method 2.4.34, 2.4.34.1, and 2.4.34.4); MIL-STD-883, Method 5011 Supporting the following documents: IPC-4101, IPC-CC-830, IPC-J-STD-001, IPC-J-STD-004, IPC-J-STD-005, IPC
Kentwood, MI, US
ASTM C518 Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus CAN/ULC 701.1 Standard for Thermal Insulation, Polystyrene Boards CAN/ULC 702.1 Standard For Mineral Fibre Therm
Bronx, NY, US
ASTM C518 Determining Ignition Temperature ASTM D1929; ISO 2719 Behavior of Materials in a Vertical Tube at 750o C ASTM E136 (Option A and B); ISO 1182
Forest Park, GA, US
ASTM C518 Steady-State Thermal Transmission Properties by Means of The Heat Flow Meter Apparatus ASTM C273 Shear Properties of Sandwich Core Materials ASTM D638 Tensile Properties of Plastics ASTM D790 Flexural Properties of Unreinforce
York, PA, US
ASTM C518 Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus ASTM C612 Standard specification for mineral fiber block and board thermal insulation ASTM C1199 Standard test met
Nappanee, IN, US
ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ASTM C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mo
St. Paul, MN, US
ASTM C518 Rigid, Cellular Polystyrene Thermal Insulation ASTM C578 (Except Oxygen Index) Thermal Performance by Hot Box Apparatus ASTM C1363 Compression, Density, Thermal and Humid Aging of Rigid Cellular Plastics ASTM D1621, D
This page is a fixed slice of the register: every ASTM C518 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.