10 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D1525 testing. From the accredited scope text: “ASTM D1525 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure ASTM D1598 Test Method for Short-Term Hydraulic Failure Pressure of Plastic Pipe, Tubing and Fittin” “ASTM D1525 (Rate B) Vicat Softening Temperature of Plastics ISO 75-1 Determination of Temperature of Deflection under Load – General Test Method ISO 75-2 Determination of Temperature of Deflection und” “ASTM D1525 Vicat Softening Temperature of Plastic ASTM D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ISO 306 Determination of Vicat Softening Temperature (VST) o” “ASTM D1525; ISO 75, ISO 306; Toyota BSDM 0501, TSM 0501G Humidity / Autoclave Exposures ASTM D1735, ASTM D2247, ASTM D3574 Test J, ASTM D4585; CFFA-110; Ford FLTM BO 012-01, FLTM BQ 104-02; GM9215P (1”
Anaheim, CA, US
ASTM D1525; UL 746A Visual Inspection IPC-A-600; IPC-A-610; IPC-TM-650 (Methods, 2.1.8, 2.2.1, 2.2.2, and 2.2.5); IPC-SM-840; MIL-I-46058; MIL-P 50884 2; MIL-PRF-50884 2; MIL-PRF 31032 2; MIL-PRF 55110 2; ANA-0024-006
Ithaca, NY, US
ASTM D1525 Environmental Stress-Cracking of Ethylene Plastics ASTM D1693 (Conditions A and B)
Warren, MI, US
ASTM D1525 Vicat Softening Temperature of Plastic ASTM D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ISO 306 Determination of Vicat Softening Temperature (VST) of Thermoplastic Materials ISO 75-1
Ann Arbor, MI, US
ASTM D1525 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure ASTM D1598 Test Method for Short-Term Hydraulic Failure Pressure of Plastic Pipe, Tubing and Fittings ASTM D1599 Standard Test Metho
Nashville, TN, US
ASTM D1525; ISO 306
Barberton, OH, US
ASTM D1525 (Rate B) Vicat Softening Temperature of Plastics ISO 75-1 Determination of Temperature of Deflection under Load – General Test Method ISO 75-2 Determination of Temperature of Deflection under Load – Plastics and Ebonite ISO
Harper Woods, MI, US
ASTM D1525; ISO 75, ISO 306; Toyota BSDM 0501, TSM 0501G Humidity / Autoclave Exposures ASTM D1735, ASTM D2247, ASTM D3574 Test J, ASTM D4585; CFFA-110; Ford FLTM BO 012-01, FLTM BQ 104-02; GM9215P (1988); GMW14124 Cycle T, GMW
Kentwood, MI, US
ASTM D1525; ISO 306 Tensile/Elongation ASTM D412; ASTM D638; ASTM D882; ASTM D3574-E; ASTM D5034; ASTM D5035; Chrysler LP-463KB-2-01; TSL 5100G (Section 4.3); ISO 527-1, 2; GMW3010; ISO 1926; TSM 7500G (Section 5.2); DBL 5578 (Sec
Richmond, IN, US
ASTM D1525 Water Absorption ASTM D570 Xenon Arc Weathering ASTM D2565 (Cycle 1) Flame Testing ISO 3795; FVMSS 302; UL 94, Section 7 and 8
Belpre, OH, US
Parameter/Equipment Range CMC2 (±) Comments Extrusion Plastometer – Melt Flow Index3 (cont) Die – Inside Diameter Bore – Outside Diameter Mass – Load Weights 2.10 mm Up to 30 mm (0 to 10) lb
This page is a fixed slice of the register: every ASTM D1525 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.