ASTM A956 Accredited Testing Labs Worldwide
17 accredited laboratories in 7 countries hold ASTM A956 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM A956 scope entries most often cover Hardness, Charpy Impact Strength, Distance Between Two Points in Metal, Steel.
Available in 7 Countries
Top matrices for ASTM A956
Top analytes for ASTM A956
- Hardness (7)
- Charpy Impact Strength (1)
- Distance Between Two Points (1)
- Ferrite Content (1)
- Mass (1)
- Rockwell Hardness (1)
- Alloy Composition (1)
- Vickers Hardness (1)
Sample labs
ASTM A956 Microindentation Hardness Testers (Knoop & Vickers)3 – For Loads Less than 1000 g For Loads Greater than 1000 g X-Y Stage (100 to 250) HK (250 to 650) HK > 650 HK (100 to 240) HV (
ASTM A956 Hardness Testers – Vickers, Indirect Verification 3 ≈ 250 HV ≈ 720 HV 7.9 HV 12 HV ASTM E92 Hardness Testers – Knoop, Indirect Verification 3 ≈ 188 HK ≈ 458 HK 7.9 HK 15 HK ASTM E92 Duromet
ASTM A956 Hardness, Rockwell B, C, Superficial ASTM E18 Hardness Brinell ASTM E110 Microhardness ASTM E384 Guided Bend Test ASTM E190 Bend Testing of Materials for Ductility ASTM E290 Vickers Hardness ASTM E92
ASTM A956 Indirect Verification of Microindentation Hardness Testers3 – Knoop Vickers (545 HK, 733 HK) (531 HV, 729 HV) (13 HK, 20 HK) (20 HV, 25 HV) Indirect verification method per
ASTM A956 Scales & Balances3 1 mg to 320 g (> 320 to 5000) g (> 5 to 10) kg (> 10 to 30) kg (30 to 20 000) lbs (> 20 000 to 200 000) lbs 3.0 µg/g + 20µg 3.0 µg/g + 1 mg 4.7 µg/g + 1 mg 0.72 g 0.015 % of
ASTM A956 Indirect Verification of Microindentation Hardness Testers (Knoop & Vickers)3 – Vickers, ≤1 kg (100 to 240) HV (241 to 600) HV (600 to >650) HV Knoop, ≤1 kg (100 to 250) HK (251 to 650) HK (650 to >650) HK
ASTM A956 section 16 Force – Universal Testing Machine3 Tension & Compression Compression Tension 3 (10 to 100) kN (>100 to 500) kN (100 to 1000) kN Up to 10 kN (>10 to 30) kN (>30 to 50) kN
ASTM A956/A956M ASTM E110
ASTM A956/A956M 2022 Standard Test Method for Leeb Hardness Testing of Steel Products GRO ASTM A1038 -19 2019 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method GRO DIN EN ISO
ASTM A956/A956M-22 _
ASTM A956/A956M-22 Sprężyny walcowe i talerzowe Charakterystyka sprężyn Zakres: siła, ugięcie, sztywność PN-88/M-80700 PN-73/M-80707 Urządzenia wytwarzające lub przenoszące obciążenia rozciągające i ściskające Siła do +/- 1000 kN
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 North Cutter Circle, Suite #480 Portland, OR 97217 Bethina Barboza Wilb Phone: 503 961 9518 MECHAN
ASTM A956/A956M Hex Socket Strength ASTM F880, F880M (2017), F912, F912M (2017); ISO 898-5, 3506-3 Microhardness (Vickers) (300 & 500 gf) ASTM E384 Proof (External Threaded) Bolts ASTM A370 (A3.2.1.2), F606/F606M (3.2.3); ISO
ASTM A956 Microhardness (Vickers, Knoop) (100gf, 200gf and 500gf) ASTM B578, E384 Metallographic evaluation Preparation ASTM B665, E3 Light Microscopy ASTM E883 Grain Size ASTM B390 (Withdrawn 2006), E112 (Comparison and interc
Parameter/Equipment Range CMC2 (±) Comments Indirect Verification of Brinell Hardness Testers at Test Condition(s)3 – 10/3000/10 5/250/10 (100 to 200) HBW (300 to 400) HBW (500 to 600) HBW (40
ASTM A956 Direct Verification of Brinell Hardness Testers 3 – Verification of Test Force Verification of Brinell Scope Verification of Test Cycle (62.5, 187.5, 500, 1000, 1500, 2000, 3000) kgf (0 to 10) m
ASTM A956/A956M Indirect Calibration of UCI Hardness Testers 3 (200 to 800) HV (UCI) (20 to 70) HRC (UCI) (200 to 400) HBW (UCI) 14 HV (UCI) 0.3 HRC (UCI) 10 HBW (UCI) ASTM A1038 Durometers – Distan