ASTM C633 Accredited Testing Labs Worldwide
11 accredited laboratories in 3 countries hold ASTM C633 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM C633 scope entries most often cover Case Depth, Hardness, Porosity in Metal.
Available in 3 Countries
Top matrices for ASTM C633
Top analytes for ASTM C633
- Case Depth (1)
- Hardness (1)
- Porosity (1)
Sample labs
ASTM C633, ASTM D3359; GMW14829, ASTM B571, ASTM B533, ASTM B604; ASTM D2197; FLTM BI 106-01 Chip/Mar Resistance ASTM D3170; GMW 14700 (method B&C); SAE J400 Coating Weight ASTM A90/A90M, ASTM A428/A428M Coating/Plating Thickness AST
ASTM C633, ASTM E290, ASTM F1147, ASTM D3359; Federal Test Method Standard 141, Method “Adhesion (Wet) Tape Test” Creep, Stress Rupture (200 - 2010) °F ASTM E139, ASTM E292 End Quench Hardenability - Jominy ASTM A255; SAE J406
ASTM C633 Creep, Creep Rupture ASTM E139 Stress Rupture ASTM E139, E292 Ductility (3-Points Bend Test) ASTM E290; CAAS SAR (Chapter 6.5, Appendix 1) Hydrogen Embrittlement Test (Specimen Type 1a) ASTM F519 Tensile
ASTM C633 Erosion GEAE E50TF121, GE E50A134 Bend PLC-014 (Internal Method) Hardness Rockwell & Superficial (C and 15N, 15T,15Y) ASTM E18 Microhardness Knoop (100) gf ASTM E384 Vickers (100, 300, 500) gf
ASTM C633 Adhesion ASTM D3359 Chemical Chemical Analysis of Alloys with Optical Emission Spectroscopy (OES) Fe, Ni, Al & Cu Based Alloys ASTM E415; ASTM E1999; ASTM E1086, ASTM E3047, ASTM E1251, BS EN 15079 Corrosion Tests ASTM G4
ASTM C633 Microhardness of Coatings ASTM B578 Tension Testing of Calcium Phosphate & Metal ASTM F1147 Thickness by SEM ASTM B748 Thickness by Cross Section ASTM B487 Wet Tape Adhesion FED-STD-141 Method 6301
ASTM C633 Curved Beam Strength ASTM D6415 Filled-Hole Tension ASTM D6742 Flatwise Tension ASTM C297, D7291; EN 2243-4 Open-Hole Tension ASTM D5766 Tensile Creep Behavior ISO 899-1 Tensile ASTM C1273, C1275, C1359, D638, D882, D1708,
ASTM C633 Hoffman Scratch Test GE: E50TF61 Met. Prep. & Eval. Of Thermal Sprayed GE: E50TF65 Lap Shear Bond Strength of Thermal Sprayed GE: E50TF66 Room Temp. Erosion Test Method for Coatings GE: E50TF121
ASTM C633 Bend Test ASTM E190, E290 Coating Mass ASTM A90 Case Depth SAE J423 Microstructure ASM Metals Handbook Vol. 9
ASTM C633 Abrasion Resistance of Organic Coatings by Taber Abrasion ASTM D4060; MIL-PRF-8625; Abrasion Resistance of Hard Anodic Coatings by Taber Abrasion ASTM B1023 Wet Tape Adhesion MIL-PRF-8625, MIL-DTL-5541; FED-STD-141
ASTM C633 Density ASTM B311, ASTM B328-96 (2009), ASTM B962, ASTM B963, ASTM D792 Ferrite Determination (Feritscope) (Ferrous) AWS A4.2 Failure Analysis Using the methods listed on scopes 0711.01 & 0711.02 in accordance with