9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM C633 testing. From the accredited scope text: “ASTM C633 Curved Beam Strength ASTM D6415 Filled-Hole Tension ASTM D6742 Flatwise Tension ASTM C297, D7291; EN 2243-4 Open-Hole Tension ASTM D5766 Tensile Creep Behavior ISO 899-1 Tensile ASTM C1273,” “ASTM C633 Microhardness of Coatings ASTM B578 Tension Testing of Calcium Phosphate & Metal ASTM F1147 Thickness by SEM ASTM B748 Thickness by Cross Section ASTM B487 Wet Tape Adhesion FED-STD-141 Meth” “ASTM C633 Hoffman Scratch Test GE: E50TF61 Met. Prep. & Eval. Of Thermal Sprayed GE: E50TF65 Lap Shear Bond Strength of Thermal Sprayed GE: E50TF66 Room Temp. Erosion Test Method for Coatings GE: E50T” “ASTM C633, ASTM E290, ASTM F1147, ASTM D3359; Federal Test Method Standard 141, Method “Adhesion (Wet) Tape Test” Creep, Stress Rupture (200 - 2010) °F ASTM E139, ASTM E292 End Quench Hardenability -”
Wixom, MI, US
ASTM C633, ASTM D3359; GMW14829, ASTM B571, ASTM B533, ASTM B604; ASTM D2197; FLTM BI 106-01 Chip/Mar Resistance ASTM D3170; GMW 14700 (method B&C); SAE J400 Coating Weight ASTM A90/A90M, ASTM A428/A428M Coating/Plating Thickness AST
Daleville, IN, US
ASTM C633, ASTM E290, ASTM F1147, ASTM D3359; Federal Test Method Standard 141, Method “Adhesion (Wet) Tape Test” Creep, Stress Rupture (200 - 2010) °F ASTM E139, ASTM E292 End Quench Hardenability - Jominy ASTM A255; SAE J406
Hilton Head Island, SC, US
ASTM C633 Erosion GEAE E50TF121, GE E50A134 Bend PLC-014 (Internal Method) Hardness Rockwell & Superficial (C and 15N, 15T,15Y) ASTM E18 Microhardness Knoop (100) gf ASTM E384 Vickers (100, 300, 500) gf
Lansing, NY, US
ASTM C633 Microhardness of Coatings ASTM B578 Tension Testing of Calcium Phosphate & Metal ASTM F1147 Thickness by SEM ASTM B748 Thickness by Cross Section ASTM B487 Wet Tape Adhesion FED-STD-141 Method 6301
Youngstown, PA, US
ASTM C633 Curved Beam Strength ASTM D6415 Filled-Hole Tension ASTM D6742 Flatwise Tension ASTM C297, D7291; EN 2243-4 Open-Hole Tension ASTM D5766 Tensile Creep Behavior ISO 899-1 Tensile ASTM C1273, C1275, C1359, D638, D882, D1708,
Cincinnati, OH, US
ASTM C633 Hoffman Scratch Test GE: E50TF61 Met. Prep. & Eval. Of Thermal Sprayed GE: E50TF65 Lap Shear Bond Strength of Thermal Sprayed GE: E50TF66 Room Temp. Erosion Test Method for Coatings GE: E50TF121
Dayton, OH, US
ASTM C633 Bend Test ASTM E190, E290 Coating Mass ASTM A90 Case Depth SAE J423 Microstructure ASM Metals Handbook Vol. 9
Sturbridge, MA, US
ASTM C633 Abrasion Resistance of Organic Coatings by Taber Abrasion ASTM D4060; MIL-PRF-8625; Abrasion Resistance of Hard Anodic Coatings by Taber Abrasion ASTM B1023 Wet Tape Adhesion MIL-PRF-8625, MIL-DTL-5541; FED-STD-141
Greendale, WI, US
ASTM C633 Density ASTM B311, ASTM B328-96 (2009), ASTM B962, ASTM B963, ASTM D792 Ferrite Determination (Feritscope) (Ferrous) AWS A4.2 Failure Analysis Using the methods listed on scopes 0711.01 & 0711.02 in accordance with
This page is a fixed slice of the register: every ASTM C633 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.