ASTM D257 Accredited Testing Labs Worldwide
15 accredited laboratories in 5 countries hold ASTM D257 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D257 scope entries most often cover Dielectric Breakdown Voltage, Izod Pendulum Impact Resistance, Surface Resistance in Ambient air, Plastics, Water.
Available in 5 Countries
Top matrices for ASTM D257
Top analytes for ASTM D257
- Dielectric Breakdown Voltage (1)
- Izod Pendulum Impact Resistance (1)
- Surface Resistance (1)
- Voltage (1)
Sample labs
ASTM D257; IPC-4101; IPC-4202; IPC-TM-650 (Methods 2.5.17 and 2.5.17.1); UL 746A Hydrolytic Stability IPC-TM-650 (Methods 2.6.11 and 2.6.11.1); IPC-CC-830; IPC-SM-840; FED-STD-141; MIL-I-46058 Moisture and Insulation Resistan
ASTM D257 PRO36 Mating/Unmating Forces EIA-364-13 PRO37 Time/Current to Smoke SAE AS4373 Method 507 PRO38 Ice Resistance MIL-DTL-38999 PRO39 Firewall testing EIA-364-45 MIL-DTL-38999 PRO40 Dry Arc Propagation Resistance SAE AS437
ASTM D257 DC Resistance or Conductance of Insulating Materials: DC Resistance, Insulation Resistance, Surface Resistance, Surface Resistivity, Volume Resistance, Volume Resistivity ASTM D374, Thickness of Electrical Insulation (Method
ASTM D257 Dielectric Testing2 – DC AC 100 V to 15 kV 100 V to 15 kV USCAR 2 MIL-STD-202-301 On the following products and components: motors, alternators, generators, controllers, starters, coils, inductors, transformers, con
ASTM D257 2014 Standard Test Methods for DC Resistance or Conductance of Insulating Material DIN 51412 -1 2005-06 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method DIN 51
ASTM D257 DC Resistance or Conductance of Insulating Materials ASTM D991 Volume Resistivity of Electrically Conductive and Antistatic Products EXPOSURE TESTING Test Method Test Accelerated Aging and Heat Resistance ASTM D454 Rub
ASTM D257 Test Methods for D-C Resistance or Conductance of Insulatin g Materials ASTM D297 Test Method for Rubber Products - Chemical Anal ysis (Section 16.3) ASTM D395 Rubber Pro perty - Compression Set ASTM D412 Test Methods for
ASTM D257; JIS C5016, JIS K6911, JIS C6481, JIS C6471, JIS C2139-3-1, JIS C2139-3-2; IEC 62631-3-1, IEC 62631-3-2; CAN/CSA C22.2 No. 17 (Section 6.3) Heater Safety Test UL 499 (Sections 33, 36, 37, 38 and 42) Testing performed o
ASTM D257; IPC-TM-650 (Methods 2.5.17.1); MIL-STD-883, Method 5011; IEC 60093 Q Factor/Q Resonance IPC-TM-650 (Method 2.5.28); MIL-I-46058 Dielectric Strength/Dielectric Breakdown/ Electrical Strength Range: AC to 50kV DC to 6
ASTM D257-14 – DC Resistance or Conductance of Insulating Materials - Section 12.3 – Surface Resistance or Conductance. Temperature / Humidity IEC 60068-2-1 (2007); IEC 60068-2-1; AS 60068.2.1 (2003); AS 60068-2-1; E
ASTM D257 High Voltage/Dielectric Withstanding Voltage (Up to 50 kV AC & 60 KV DC) ASTM D149 Types 1, 3, & 4; MIL-STD-202, Method 301 Contact Resistance, Low Level Contact Resistance (LLCR) (100 μΩ to 200 kΩ) MIL-STD-202, Met
ASTM D257 Average Grain Size by Semiautomatic and Automatic Image Analysis ASTM E1382 Microscopic Evaluation of Depth of Grinding Damage CTAL-30-MIC-03
ASTM D257; IEC 62631-3-1, 62631-3-2, 60093 (2015) Dimensional 4 Parameter Range CMC (±) 5 Technique Length Up to 12ft Up to 3.6m sphere ±0.0014 in ±0.036mm CMM-ROMER On the following types of materials and products: Autom
ASTM D257
ASTM D257 Heat and UV Light Discoloration of Light Colored Surfaces ASTM D1148 Fluorescent UV Exposure of Plastics, QUV ASTM D4329 Fluorescent Light Apparatus for UV Exposure ASTM G154 Xenon Arc Light Apparatus for Exposur