ASTM E466 Accredited Testing Labs Worldwide

ASTM E466 Strain-Controlled Fatigue Testing ASTM E606 Fatigue Crack Growth Testing ASTM E647 3 & 4 point Bend ASTM C1341, ASTM D790 Monotonic & Other Mechanical Testing (-320 to 2500) °F in Air, Inert Gas, Saline; Up to 300,000 lb

ASTM E466 ASTM E606 Tensile at Elevated Temperature – (200 to 1100) °C ASTM E21 Crack Tip Opening Displacement (CTOD) Fracture Toughness Measurement Compression test ASTM E1290 1 COP-ML

5 Mechanical-technological tests 5.1 Determination of the quasi-static properties o f metallic materials, plastics and plastic composites at different temperatures using tensile, compression and shear tests [Flex B] DIN EN ISO 6892

ASTM E466 Low Cycle Fatigue Testing ASTM E606 Conductivity of Aluminum (Eddy Current) BAC 5651 Metallographic Analysis: Preparation ASTM E3 Macroetching ASTM E340 Microscopic Examination by Etching ASTM E407; ASM Metals

ASTM E466 Low Cycle Fatigue Under Strain Control ASTM E606/E606M Fatigue Crack Growth ASTM E647 Rotating Bend WMTR-QTP-F0281 Creep Testing Creep ASTM E139; BS EN 2002-005; ISO 204 Stress Rupture ASTM E139, E292; ISO 204

ASTM E466 Application de contraintes cycliques inférieures à la limite d’élasticité et détermination du nombre de cycles à rupture

ASTM E466 EN 6072 ISO 1099 Spec GE S400 (code AI0O, AI0Y) Application de contraintes cycliques inférieures à la limite d’élasticité et détermination du nombre de cycles à rupture Mesure de la vitesse de propagation de fissure (da/

ASTM E466 Fracture Toughness and Resistance to Fracture of Metallic Materials ASTM E399, ASTM E561 KR Curve Determination (Resistance to Fracture) Testing Standard Specimen Machining BMS7-323 Sec. 8.2.2, BMS20-2 Sec. 5.5 S

ASTM E466 Strain-Controlled Fatigue Testing ASTM E606 Fatigue Crack Growth Testing ASTM E647 Rotating Bar Bending Fatigue Testing ISO 1143 Monotonic & Other Mechanical Testing (-320 to 2500) °F in Air, Inert Gas, Saline; Up to

ASTM E466 Coating Shear Fatigue ASTM F1160 Fracture Toughness ASTM E399; GB/T 4161

ASTM E466 Matériaux métalliques Essai de fatigue oligocyclique à déformation imposée (LCF) à température ambiante : Application de déformations cycliques supérieures à la limite d’élasticité et détermination des courbes contrainte/déf

ASTM E466 Fracture Toughness ASTM E1820; BSI 7448; ISO 12135, ISO 15653 Nick-Break Test AWS B4.0 Hardness Rockwell (B, C) Vickers Macro Hardness (10 kg) ASTM E18, ASTM E140 ASTM E92 V

ASTM E466; EN 6072; SOP 93.002 Linear-Elastic Plane-Strain Fracture Toughness K1C of Metallic Materials ASTM B909, ASTM E399; SOP 90.002 Residual Life Testing GE C50TF57, GE C50TF12 Strain-Controlled Fatigue Testing ASTM E606/E606M;

ASTM E466-21 Fatica assiale in controllo di carico/Conducting force controlled axial fatigue (da 6kN a 250kN ,da -80°C a +75°C) ISO 1099:2017 Grado di bandificazione o orientamento delle microstrutture/Degree of banding or orientation o

ASTM E466-21 Prova di criccatura indotta da idrogeno (HIC)/Hydrogen-induced cracking test (HIC) ANSI/NACE TM 0284-2016 Prova di criccatura sotto tensione in acido solfidrico (SSC)/Sulfide stress cracking (SSC) ASTM G39-99(2021) + ANSI/N

ASTM E466; E50TF148 Low Cycle ASTM E606; E50TF148 Tensile Elevated Temperature ASTM E21 Room Temperature ASTM E8/E8M Compression Elevated Temperature ASTM E209 Room Temperature ASTM E9 N

ASTM E466 LCF Fatigue Testing LCF (Room and Elevated Temperature) ASTM E606 ThermoMechanical Fatigue ASTM E2368 Hardness, Rockwell B, C, Superficial ASTM E18 Hardness, Brinell ASTM E10 Microhardness ASTM E384 Meta

ASTM E466 Low Cycle Fatigue (-320 to 2000) ºF; ≤ 20,000 lbs ASTM E606 Furnace Cycle Test (500 to 2800) °F LTI-044 HCF Vibration (RT to 2000) °F 10Hz – 20kHz LTI-032

ASTM E466 Strain Controlled ASTM E606/E606M