EN 12390-7 Accredited Testing Labs Worldwide
84 accredited laboratories in 8 countries hold EN 12390-7 in their ISO/IEC 17025 scope. Primary accreditors include United Kingdom Accreditation Service, Polish Centre for Accreditation, Deutsche Akkreditierungsstelle. In the register, EN 12390-7 scope entries most often cover Compressive Strength, Particle Size Distribution, Density in Concrete, Drinking water, Ambient air.
Available in 8 Countries
Top matrices for EN 12390-7
Top analytes for EN 12390-7
- Compressive Strength (30)
- Particle Size Distribution (9)
- Density (7)
- Slump (4)
- Water Content (4)
- Air Voids Content (2)
- Bond Strength (2)
- Chloride Content (1)
Sample labs
EN 12390-7:2019 + AC 2020 Laboratory
EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content (oven drying method) BS 1377-2:1990 A Water content (oven drying method) BS 1377-2:2022 A Liquid limit : cone penetrometer (defi
EN 12390-7: 2019 215 Aggregates (Chemical Tests) - .01 Water soluble chloride salts Aggregates 0.001-2.000% EN 1744-1: 2012 215 Aggregates (Chemical Tests) - .02 Water soluble sulphates 0.01-2.00% EN 1744-1: 2012 215 Aggregates (Che
EN 12390-7 SIT 10 Hardened concrete and hardened mortar Determination of the compression strength and the volumetric mass of drill cores of concrete from constructions; force measurement and gravimetry WI-528 NEN EN 12390-7, NEN
EN 12390-7:2019 A Cored specimens - examining and testing in compression BS EN 12504-1:2019 A Sampling of concrete by dust drilling Documented In-House Method No. 112, October 2002 X Depth of carbonation BS EN 146
EN 12390-7:2019 + AC 2020 Laboratory
EN 12390-7:2011 PN-EN 12390-7:2019-08 PN-EN 12390-7:2019-08/AC:2021-01 Głębokość penetracji wody pod ciśnieniem PN-EN 12390-8:2011 PN-EN 12390-8:2019-08 Odporność na zamrażanie i odmrażanie Metoda referencyjna (slab test) PKN-C
EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory ROCK Point load strength ISRM commission on testing methods. Suggested method for determining point load s
DIN EN 12350 -1 2019-09 Prüfung von Frischbeton - Teil 1: Probenahme und Prüfgeräte DIN EN 12350 -2 2019-09 Prüfung von Frischbeton - Teil 2: Setzmaß DIN EN 12350 -4 2019-09 Prüfung von Frischbeton - Teil 4: Verdichtungsmaß
EN 12390-7:2019-08 PN-EN 12390-7:2019-08/AC:2021-01 Wytrzymałość na zginanie Zakres: (10 – 100) kN PN-EN 12390-5:2019-08 Wytrzymałość na rozciąganie przy rozłupywaniu Zakres: (100 – 3000) kN PN-EN 12390-6:2024-04 Głębokość penetrac
EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory Depth of penetration of water under pressure BS EN 12390-8 2019 Laboratory CONCRETE, MORTAR AND
EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 A Water content BS 1377-2:2022 A Saturation moisture content of chalk BS 1377-2:1990 A Liquid limit
DIN EN 12350 -1 2019-09 Prüfverfahren Frischbeton - Teil 1: Probenahme und Prüfgeräte B DIN EN 12350 -2 2019-09 Prüfverfahren Frischbeton - Teil 2: Setzmaß B DIN EN 12350 -4 2019-09 Prüfverfahren Frischbeton - Teil 4:
EN 12390-7: 2019 Laboratory Cored specimens – taking, examining and testing in compression BS EN 12504-1: 2019 Laboratory Flexural strength BS EN 12390-5:2019 Laboratory Tensile splitting strength BS EN 12390-6:2009
NEN-EN 12390-7 V 2 Determination of the compressive strength; pressure loads VW 04.02.08 NEN-EN 12390-3 V 3 Determination of the penetration depth of water under pressure; measurement of the penetration depth to split samples VW
EN 12390-7 APN 47. Aanmaakwater voor beton Het aantonen van schadelijke bestanddelen voor de reactie van cement met water en de aantasting van wapeningsstaal; indamprest, gravimetrie K-IP-328 eigen methode (uitvoering monstervo
EN 12390-7: 2009 (Withdrawn) BS EN 12390-7:2019 + AC:2020 A Determination of the chloride migration coefficient BS EN 12390-18:2021 A CONCRETE, MORTAR & CEMENT-BASED REPAIR MATERIALS Chloride migration coefficient f
EN 12390-7 Testing Hardened Concrete - Density of hardened concrete BS EN 12504-1 Testing Concrete in Structures: Cored Specimens - Taking, examining and Testing in Compression ASTM C642 Density, Absorption, and Voids in Hardened Concret
EN 12390-7:2019 A
EN 12390-7:2019 Lenham Shape and dimensions of concrete cubes BS EN 12390-1:2021 Lenham SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 Lenham Water content BS 1377-2
EN 12390-7:2009 Lab SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 Lab Liquid limit - cone penetrometer BS 1377-2:1990 Lab Liquid limit - cone penetrometer - one poi
EN 12390-7:2019 A END
EN 12390-7:2019+AC:2020 A, C, E, H, X Taking cores BS EN 12504-1:2019 B, X Cored specimens - examining and testing in compression BS EN 12504-1:2019 A, H, X NATURAL STONE Slip resistance by means of the pendulum test
EN 12390-7:2019 AC2020 END
This document is a translation. The definitive version is the original German annex to the accreditation certificate. DIN EN 12350 -8 2019-09 Testing fresh concrete - Part 8: Self -compacting concrete - Slump - flow test DIN EN 1
EN 12390-7:2019 incorporating corrigendum November 2020 Brigstock CONCRETE - fresh Sampling composite and spot samples of fresh concrete on site BS EN 12350-1:2019 Site Slump BS EN 12350-2:2019 Site Making a
EN 12390-7:2019 B AGGREGATES Sampling stockpiles of fine and coarse aggregates by hand BS EN 932-1:1997 C Sample reduction by riffle box BS EN 932-2:1999 B Sample reduction by quartering BS EN 932-2:1999 B
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1 Hardened concrete DIN EN 1542 1999-07 Products and systems for the protection and repair of concrete structu
EN 12390-7:2019 Bellshill Barnsley Daventry
EN 12390-7:2019 & AC:2020 214 Soils (Site Tests) - .01 Resitivity Soils for Civil Engineering Purposes BS 1377-3: 2018+A1:2021 214 Soils (Site Tests) - .02 Redox Potential BS 1377-3: 2018+A1:2021 215 Aggregates (Chemi
EN 12390-7:2019 Woking Birmingham CONCRETE - fresh Sampling fresh concrete on site BS EN 12350-1:2019 Site Slump test BS EN 12350-2:2019 Site Flow table test BS EN 12350-5:2019 Site Air content - pressure gaug
DIN EN 12350 -1 2019 -09 Prüfung von Festbeton – Teil 1: Probenahme DIN EN 12350 -5 2019 -09 Prüfung von Frischbeton – Teil 5: Ausbreitmaß DIN EN 12350 -6 2019 -09 Prüfung von Frischbeton – Teil 6: Frischbetonrohdichte
EN 12390-7:2019-08 PN-EN 12390-7:2019-08/AC:2021-01 Wytrzymałość na zginanie Zakres: (2-135) kN PN-EN 12390-5:2019-08 Głębokość penetracji wody pod ciśnieniem PN-EN 12390-8:2019-08 Nasiąkliwość PN-88/B-06250 Przepuszczalność wody
This document is a translation. The definitive version is the original German annex to the accreditation certificate. The testing methods are identified with the symbols below, according to the sites where the testing was performed:
EN 12390-7:2019 + AC 2020 Daventry END
EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory SOILS for civil engineering purposes Water Content - oven drying method BS 1377:Part 2:2022 BS 1377:
EN 12390-7:2019; BS EN 12390-7:2019 216 Aggregates - .03 Sample reduction Aggregate Riffle Box BS EN 932-2:1999 216 Aggregates - .04 Particle size distribution Wash/Dry Sieving BS EN 933-1:2012 216 Aggregates - .05 Flakiness ind
EN 12390-7:2019 incorporating corrigendum November 2020 A
EN 12390-7:2019 incorporating corrigendum November 2020 A PILED FOUNDATIONS Pile integrity – low strain sonic integrity testing using a low strain sonic echo time domain system ASTM D5882-16 B END
EN 12390-7:2019 Incorporating corrigendum November 2020 A Compressive strength of cores BS EN 12504-1:2019 Incorporating corrigendum November 2020 A END
EN 12390-7:2019 A CONCRETE - Fresh Sampling of fresh concrete on site BS EN 12350-1:2019 B - composite sample - spot sample Slump test BS EN 12350-2:2019 B Making and curing specimens for strength tests B
EN 12390-7:2019 Laboratory Cored specimens – examining and testing in compression BS EN 12504-1 :2019 Laboratory SOILS for civil engineering purposes Particle size distribution - wet sieving – dry sieving BS 137
EN 12390-7:2019 Lab Shape and Dimensions BS EN 12390-1:2021 Lab
EN 12390-7:2019 Laboratory Flexural strength of test specimens BS EN 12390-5:2019 Laboratory Cored specimens – Taking, examining and testing in compression BS EN 12504-1:2019 Laboratory Site
EN 12390-7 Mortar At least once a year Dry bulk density Dry bulk density EN 1015-10
EN 12390-7 : 2019 / CSOP008 216 Aggregates - .03 Sample reduction Methods for reducing laboratory samples EN932-2:1999 / CSOP082 216 Aggregates - .04 Particle size distribution Dry Sieving IS EN 933 -1:2012 / CSOP079 Washing
EN 12390-7:2019 + AC 2020 Cleadon Lane MORTARS, SCREEDS and PLASTERS Mechanical Tests Compressive strength - including curing BS 4551:1980 Cleadon Lane Physical Tests Density BS 1881:Part 114:1983 Cleadon
Prüfungen in den Bereichen: Prüfung von Festbeton DIN EN 12390 -3 2009-07 Prüfung von Festbeton - Teil 3: Druckfestigkeit von Probekörpern (zurückgezogene Norm) DIN EN 12390 -7 2009-07 Prüfung von Festbeton - Teil 7: Dicht
EN 12390-7:2019 A Determination of the thickness of a concrete pavement from cores BS EN 13863-3:2004 A GEOTECHNICAL INVESTIGATION and TESTING - Laboratory testing of soil Water content BS EN ISO 17892-1:2014 A
EN 12390-7: 2019 Lab Flexural strength BS EN 12390-5: 2019 Lab Fibre Content BS EN 14488-7: 2006 Lab Flexural Tensile Strength ((limit of proportionality (LOP), residual) BS EN 14651: 2005+A1:2007 Lab ROAD MA
Showing labs 1–50 of 84. Use pagination below to see more.