ISO 11359-2 Accredited Testing Labs Worldwide
See all 16 labs worldwide for ISO 11359 (any part)
Part 1 (General principles): 6 labs · Part 2: 14 labs · Part 3 (Determination of penetration temperature): 1 lab
14 accredited laboratories in 4 countries hold ISO 11359-2 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle.
Available in 4 Countries
Top matrices for ISO 11359-2
Sample labs
ISO 11359-2 Plastics – Determination of the Fluidity of Plastics using Capillary & Slit-Die Rheometer ISO 11443 (Method A) Melting Point by Differential Scanning Calorimeter GM 9094P (2011) Multi-Axial Impact GM 9904P
Test Method : Test Description: ASTM E1508 Energy Dispersive Spectroscopy (EDS): EDX, Elemental Scan, Micro Identification, Contaminant Identification ASTM E1545 Thermomechanical Anal ysis (TMA): Glass Transition (Tg) ASTM E1621 X
ISO 11359-2 Glass Transition Temp. and Coefficient of Thermal Expansion by TMA Preparation Method(s) Associated Specifications Bag TSM 0508G; ISO 12219-2, ISO 12219-9 GMW17914 A TSM 0508G NES M0402 MS300-55 01.12-L-10661 BZ 108-01
Beispielhafte Prüfverfahren: DIN EN ISO 11357 -1 2017-02 Kunststoffe ‒ Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen DIN EN ISO 11357 -2 2020-08 Kunststoffe ‒ Dynamische Differenzkalorimetrie (DSC)
ISO 11359-2:2021 _ Contenuto di acqua/Water content UNI EN ISO 15512:2019 Met B2 Gravimetria Determinazione della temperatura di inflessione sotto carico/Determination of temperature of decflection under load UNI EN ISO 75-1:2020, UNI
1.1.12 Biegeversuche * Biegeprüfungen an Kunststoffen wie Thermoplasten, D uromeren, thermoplastischen Elastomeren, beschichteten, verstärkten oder gefüllten Kunststof fen, Kunststoffverbundwerkstoffen, Schäumen, gefügten Kunststoffen
ISO 11359-2 Plastics – Thermomechanical Analysis (TMA) – Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature ASTM D6370 Rubber – Compositional Analysis by Thermogravimetry (TGA) ASTM E1131 Composit
ISO 11359-2, ISO 11359-3
ISO 11359-2 Thermogravimetry (TG) ISO 11358-2; ASTM D3850, E1131 Differential Scanning Calorimetry ISO 11357-1/-2/-3 Resistance to Acid Spotting FLTM BI 113-02 Bleeding, Perspiration, and Water Spotting FLTM AN 101-01; GM
Test: Standard: 2 Chrysler LP-463KC-03-01; GMW 14102 STEP Test ASTM B465; ASTM B764; GMW 14668 (Sec. 3.4.3) Stretch and Set of Textile and Leather SAE J855; GMW3211 Temperature/Humidity cycle ISO16750-4 (Sec. 5.3
Test(s): Test Method(s) 1: Gloss ASTM D523, D2457 Haze ASTM D1003 (A) Heat Sealability ASTM F2029 Hot Seal Strength ASTM F1921 / F1921M Ignition Loss ASTM D2584, D5630; ISO 1172 Method A, 3451-1, 2, 4, 5 (Met
9 Optische Prüfungen [Flex A] DIN EN 20105 -A02 1994-10 Textilien – Farbechtheitsprüfungen – Teil A02: Graumaßstab zur Bewertung der Änderung der Farbe DIN EN ISO 105 -A03 2020-02 Textilien – Farbechtheitsprüfungen – Teil
ISO 11359-2 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination 2021-11 of coefficient of linear thermal expansion and glass transition temperature ISO 11357-1 Plastics — Differential scanning calorimetry (DSC) — Part 1: Gene
This document is a translation. The definitive version is the original German annex to the accreditation certificate. ISO 11359 -2 1999 -10 Plastics – Thermomechanical analysis (TMA) – Part 2: Determination of coefficient of linear t