ISO 6157 Accredited Testing Labs Worldwide
ISO 6157, all parts: Fasteners - Surface discontinuities. Each lab card shows which parts it holds.
- ISO 6157-1Part 1: Bolts, screws and studs for general requirements10 labs →
- ISO 6157-2Part 2: Nuts7 labs →
- ISO 6157-3Part 3: Bolts, screws and studs for special requirements5 labs →
16 accredited laboratories in 6 countries hold ISO 6157 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ISO 6157 scope entries most often cover Hardness, Al, Tensile Strength in Metal, Drinking water, Fasteners.
Available in 6 Countries
Top matrices for ISO 6157
Top analytes for ISO 6157
- Hardness (3)
- Al (1)
- Tensile Strength (1)
Sample labs
ISO 6157-1 BS EN ISO 6157-2
ISO 6157-1; 6157-2, 6157-3 (Exclude Sec. 3.6); XRF PMI Analysis Internal Procedure QA7T-96 Stainless Steel Fe, Cr, Ni, Mn, Mo, Cu, P, S, Si Brass Cu, Zn, Pb, Fe, Sn, Si, Ni Aluminum
ISO 6157 -2 2004 -10 Verbindungselemente – Oberflächenfehler – Teil 2: Muttern DIN EN ISO 10484 2004 -10 Aufweitversuch an Muttern 3.2 Schichtdickenmessung [Flex A] DIN EN ISO 3497 2001 -12 Metallische Schichten – S
ISO 6157-1, 6157-2, 6157-3; SAE J123, J122 Coating/Plating Thickness by X-Ray Thickness by Microscopical Examination Weight/Mass per Area ASTM B568 ASTM B487 ASTM A90/A90M, B767; ISO 3892 Drill Drive Test DIN
ISO 6157 -2 2004-10 Verbindungselemente - Oberflächenfehler - Teil 2: Muttern
ISO 6157-2 Salt Spray ASTM B117 Torque Tension/Prevailing Torque ANSI/ASME B18.16M; ASME B18.16.6; DIN 267, Part 15 (Inactive 1983); IFI 100/107 (Withdrawn 2002), 101; ISO 2320, 16047; SAE J174 Depth of Decarburization Case
ISO 6157-1, 6157-2 Tensile & Shear Test for Rivet IFI 135 Twist Test for Split Lock Washer ASME B18.21.1 Chemical Composition for Stainless Steel Using XRF PMI Analyzer (Al, Fe, Cu, Cr, Mn, Mo, Ni, Pb, Zn) Internal Proce