ISO 6157 Accredited Testing Labs Worldwide
ISO 6157, all parts: Fasteners - Surface discontinuities. Each lab card shows which parts it holds.
- ISO 6157-1Part 1: Bolts, screws and studs for general requirements10 labs →
- ISO 6157-2Part 2: Nuts7 labs →
- ISO 6157-3Part 3: Bolts, screws and studs for special requirements5 labs →
16 accredited laboratories in 6 countries hold ISO 6157 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ISO 6157 scope entries most often cover Hardness, Al, Tensile Strength in Metal, Drinking water, Fasteners.
Available in 6 Countries
Top matrices for ISO 6157
Top analytes for ISO 6157
- Hardness (3)
- Al (1)
- Tensile Strength (1)
Sample labs
ISO 6157-1; 6157-2, 6157-3 (Exclude Sec. 3.6); XRF PMI Analysis Internal Procedure QA7T-96 Stainless Steel Fe, Cr, Ni, Mn, Mo, Cu, P, S, Si Brass Cu, Zn, Pb, Fe, Sn, Si, Ni Aluminum
ISO 6157-1, 6157-3
ISO 6157-3; SAE J123, J1601; ASTM F788-13 Tensile for Externally Threaded Fasteners (Axial, Wedge, Proof) ASTM F606/F606M Torsion ASTM F606 Embrittlement of Metallic Coated and Non-Coated/Uncoated Externally Threaded Fasteners ASTM F6
ISO 6157-1, 6157-2, 6157-3; SAE J123, J122 Coating/Plating Thickness by X-Ray Thickness by Microscopical Examination Weight/Mass per Area ASTM B568 ASTM B487 ASTM A90/A90M, B767; ISO 3892 Drill Drive Test DIN
ISO 6157-1, ISO 6157-3; SAE J123, SAE J1061 Surface Discontinuities of Internally Threaded Fasteners ASTM F812/F812M; SAE J122 Torque MIL-DTL-18240 Torsional Strength Test of Thread Rolling and Self Drilling Tapping Screws ASME B18