FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates

ISO 9606 Accredited Testing Labs Worldwide

ISO 9606, all parts. Each lab card shows which parts it holds.

Parts of this series

37 accredited laboratories in 5 countries hold ISO 9606 in their ISO/IEC 17025 scope. Primary accreditors include United Kingdom Accreditation Service, American Association for Laboratory Accreditation. In the register, ISO 9606 scope entries most often cover Hardness, Bending Moment, Carbide Microstructure in Metal, Drinking water, Steel.

Total labs
37
Countries
5
Top matrix
Metal
28 labs

Available in 5 Countries

United Kingdom
29 labs
United States
4 labs
Netherlands
2 labs
United Arab Emirates
1 lab
Sweden
1 lab

Top matrices for ISO 9606

Metal
28 labs
Drinking water
1 lab
Steel
1 lab

Top analytes for ISO 9606

  • Hardness (10)
  • Bending Moment (1)
  • Carbide Microstructure (1)
  • Ferrite (1)
  • Ferrite Content (1)
  • Ferrite Count (1)
  • Ferrite Point Count (1)
  • Grain Size (1)

Sample labs

Filter by partAny part (37)Part 1 (33)Part 2 (29)Part 3 (4)Part 4 (7)Part 5 (4)
Metaltech Services
Gateshead, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2 : 2004 BS EN ISO 15614-1: 2017 +A1 :2019 BS EN ISO 15614-2 : 2005 BS EN ISO 10042 : 2018 ASME IX:2025 API 1104 22nd Edition 2021+ Eratta 1 AWS D1.1/D1.1M 25th Edition :2025 GAT AWS D1.2/

SR Welding & NDT Technology
Nottinghamshire, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 Fracture BS EN ISO 9017:2018 Macro and micro examination BS EN ISO 17639:2022 Visual examination BS EN ISO 17637:2016 END

Minton, Treharne and Davies
South Glamorgan, GB
Holds: Part 1 · Part 2

ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 9017 BS EN ISO 5178 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 9015-1 BS EN ISO 17639 ASME IX A STAINLESS STEEL Corrosion Tests Pitting corrosi

SGS United Kingdom
Wolverhampton, GB
Holds: Part 1 · Part 2

ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-6 BS EN ISO 15614-8 ASME IX API Spec 5L AWS B4.0M AWS D1.1/D1.1.M BS EN ISO 5817 ASTM E190-92 CON Fracture toughness testing (CTOD) of wel

ASAMS Limited
Norfolk, GB
Holds: Part 1 · Part 2

ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-6 BS EN ISO 15614-7 BS EN ISO 15614-8 BS EN ISO 9016 BS EN ISO 5178 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 9015-1 BS EN ISO 9017 BS EN ISO 17639

Element Cleveland
Cleveland, OH, US
Holds: Part 1 · Part 2

ISO 9606-1, 9606-2; ISO 15614-1, 15614-2 Failure Analysis Using the methods listed above and on scopes of accreditation 0100.02 and 0100.10 in accordance with ASM Handbook Volume II. SEM/EDS ASTM E1508; SOP 60.361 Density –

Element Materials Technology Sheffield Ltd, Trading as Element Materials Technology Sheffield – Magna Way
South Yorkshire, GB
Holds: Part 2

ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-8 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9015-2 BS EN ISO 9016 BS EN ISO 9017 BS EN 17639 BS 2633 PD 5500 ASME IX Case depth

Sandberg LLP
London, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 9016:2022 BS EN ISO 5178:2019 BS EN ISO 4136:2022 BS EN ISO 5173:2023 BS EN ISO 9015-1:2011 BS EN ISO 9017:2018 BS EN ISO

Inspekt Sweden
Arnäsvall, SE
Holds: Part 1 · Part 2 · Part 3 · Part 4 · Part 5

ISO 9606-1:2017 Svetsare, stål Procedur 3.1 Certifieringsregler, Personcertifiering av Svetsare och Svetsoperatörer Rev. 3.3 Svetsare, stål Exklusive metod för förlängning av certifikat enligt 9.3c SS-EN ISO 9606-2:2005 Svetsare, övrigt

Ultramag Inspection Services
Southampton, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2: 2004 ASME BPVC.IX- 2023 END

Code A Weld Holdings
Radstock, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2004 +A2:2012 (Withdrawn)BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2 :2005 BCAR A8-10 RPS 912:Issue 15 ASME IX-2023 A Tests designated in specified welding codes

Advanced Metallurgical Services
Oldham, GB
Holds: Part 1 · Part 2

ISO 9606-1 :2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 15614-5:2004 BS EN ISO 15614-6:2006 BS EN ISO 15614-7:2019 BS EN ISO 15614-8:2016 BS EN ISO 9016:2022 BS EN ISO 9017:2018 BS EN

British Engineering Services
Warrington, GB
Holds: Part 1 · Part 2 · Part 3 · Part 4 · Part 5

ISO 9606-1:2017 BS EN ISO 9606-2 :2004 BS EN ISO 9606-3 :1999 BS EN ISO 9606-4 :1999 BS EN ISO 9606-5 :2000 BS EN ISO 15614- 1:2017+a1:2019 BS EN ISO 15614-2 :2005 BS EN ISO 15614-5 :2004 BS EN ISO 15614-6 :2006 BS EN ISO 15614-8 :

Element Materials Technology ME Limited Abu Dhabi
Abu Dhabi, AE
Holds: Part 1 · Part 2

ISO 9606-1, BS EN ISO 9606-2; ASME IX; API 1104; AWS D1.1/D1.1M; BS EN ISO 13847; ISO 5817; ASTM E340, ASTM E190; AWS B4.0 Metallurgical: Phase Volume Fraction ASTM E562 Grain Size (By Comparison) ASTM E112 Micro preparation

WTTI
Allentown, PA, US
Holds: Part 1 · Part 2 · Part 4

Test Method: Test Description: Charpy Impact (< 590) ft-lbs; (175 to -452) °F ASTM A370, E23; ASME IX; AWS B4.0; ASTM A923 Method B, ASTM A1084 Method B Chemical Analysis (Steel, Stainless Steel, Nickel, & Copper Alloys) (Al, C,

AMPP Services
Cambridgeshire, GB
Holds: Part 1 · Part 2 · Part 4

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 9606-4:1999 BS ISO 24394:2023 BS EN ISO 17639:2022 RPS 912:Issue 18 AWS D-17.1/D-17.1M:2017-ADM2 BCAR A8-10 END

BES Group Testing Rotech
West Midlands, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 15620:2019 BPVC ASME IX:2023 CAP 533 BCAR Section A8-10 A METALLIC COATINGS Corrosion Tests Neutral salt spray ASTM

Keighley Laboratories Ltd
West Yorkshire, GB
Holds: Part 1 · Part 2

ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-8 BS EN ISO 9016 BS EN ISO 5178 BS EN ISO 4136 BS EN ISO 5173+A1 BS EN ISO 9015-1 BS EN ISO 9017 BS EN ISO 17637 BS EN ISO 17639 BS ISO 24394 AVP

CDL Group
Powys, GB
Holds: Part 1 · Part 2

ISO 9606-1 :2017 BS EN ISO 9606-2 :2004 BS EN ISO 15614-1 :2017+A1 :2019 BS EN ISO 15614-2 :2005 ASME IX: 2025 END

APAVE UK
Derby, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017+ A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 15614-8:2016 BS EN ISO 15614-7:2019 ASME BPVS IX: 2025 AWS D1.1/D1.1M:2025 BS EN ISO 17637:2016 BS EN ISO 9018:2015 BS EN ISO

Induction Pipe Bending UK Limited trading as IPB Mechanical Testing
Tyne & Wear, GB
Holds: Part 1 · Part 2

ISO 9606-1 2017 BS EN ISO 9606-2 2004 BS EN ISO 15614-1: 2017 + A1: 2019 BS EN ISO 15614-2: 2005 AWS D1.1.1M: 2025 ASME IX: 2025 END

Element Materials Technology Aberdeen
Aberdeen, GB
Holds: Part 1 · Part 2

ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 4136 BS EN ISO 9016 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9017 BS EN ISO 17639 BS 4515-1 BS 4515-2 API 1104 API 6A AWS D1.1/D1.1M ASME IX Altens Metallurgical Te

NDT Services
Derbyshire, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 15609-1:2019 BS EN ISO 15613:2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 15614-3:2008 BS EN ISO 15614-5:2004 BS EN ISO 15614-6:2006 BS EN ISO 15614-7:2019 BS EN ISO 15614-8:2016 B

Metaltest UK (a division of LTI Metaltech Limited)
Abingdon, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-1:2004+A2:2012 (Withdrawn) BS EN 13445-4 2021+A1:2023 BS EN 13445-5 2021 BS EN ISO 15614-2:2005 END

MSMK Training
Sheffield, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS 4515-1:2009 BS 4515-2:1999 END

Element Materials Technology Aerospace UK Limited, Trading as Element Materials Technology
Lancaster, GB
Holds: Part 1 · Part 2

ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9016 BS EN ISO 9017 BS EN ISO 17639 PD 5500 ASME BPVC IX AWS D1.1/D1.1M ASME B31.3 API 11

WQ Inspection & Certification
West Midlands, GB
Holds: Part 1 · Part 2 · Part 3 · Part 4 · Part 5

ISO 9606-1 :2017 BS EN ISO 9606-2 :2004 BS EN ISO 9606-3 :1999 BS EN ISO 9606-4 :1999 BS EN ISO 9606-5 :2000 BS EN ISO 14732: 2025 BS EN ISO 15614-1 :2017+A1 :2019 BS EN ISO 15614-2 :2005 BS EN ISO 15614-5 :2004 BS EN ISO 15614-6 :

Southdown Materials Testing
West Midlands, GB
Holds: Part 1 · Part 2

ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 15614-8:2016 BS EN ISO 4136:2022 BS EN ISO 5173:2023 BS EN ISO 5178:2019 BS EN ISO 9015-1:2011 BS EN ISO 9016:2022 BS EN ISO 9

Inidam Limited
Hampshire, GB
Holds: Part 1 · Part 2

ISO 9606-1: 2017 BS EN ISO 9606-2: 2004 BS EN ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2: 2005 ASME IX: 2021 METALS, ALLOYS and METAL PRODUCTS Mechanical Tests Rockwell (A, B (W) and C Scales) BS EN ISO 6508-1: 2023 A