EN 27888 1993-11 Accredited Testing Labs in Germany
11 laboratories in Germany are accredited by DAKKS under ISO/IEC 17025 to perform EN 27888 1993-11 testing. These labs commonly handle Metals, Water matrices. Most frequently tested analytes via this method in Germany: Coliform Bacteria, Clostridium Perfringens, Elektrischen Leitfähigkeit. Accredited providers include ALS Germany, Probanda, Eurofins INLAB, Wasser Service Süd, ANALYTIKUM Umweltlabor. Sites located in Altenberge, Hemmingen, Dortmund, Heidenheim an der Brenz, Merseburg.
Accredited Labs
Anlage zur Akkreditierungsurkunde D-PL-14162-01-05 Gültig ab: 30.09.2025 Ausstellungsdatum: 30.09.2025 Seite 42 von 123 DIN EN 27888 1993-11 Wasserbeschaffenheit - Bestimmung der elektrischen Leitfähigkeit (Modifikation:
Anlage zur Teil-Akkreditierungsurkunde D-PL-21792-01-01 Gültig ab: 10.06.2024 Ausstellungsdatum: 10.06.2024 Seite 4 von 5 ANLAGE 2: CHEMISCHE PARAMETER nicht belegt ANLAGE 3: INDIKATORPARAMETER Teil I: Allgemeine Indikatorpara
Anlage zur Teil-Akkreditierungsurkunde D-PL-18662-01-02 ANLAGE 3: INDIKATORPARAMETER Teil I: Allgemeine lndikatorparameter DAkkS Deutsche Akkreditierungsstelle Parameter Verfahren Aluminium nicht belegt Ammonium nicht belegt Calcitlösekapaz
Anlage zur Akkreditierungsurkunde D-PL-22587-01-00 Gültig ab: 27.01.2025 Ausstellungsdatum: 27.01.2025 Seite 3 von 4 Parameter Verfahren Coliforme Bakterien nicht belegt Eisen nicht belegt Elektrische Leitfähigkeit DIN EN 27888
Anlage zur Teil-Akkreditierungsurkunde D-PL-18032-01-02 Gültig ab: 11.11.2024 Ausstellungsdatum: 11.11.2024 Seite 4 von 16 DIN 19529 2015-12 Elution von Feststoffen - Schüttelverfahren zur Untersuchung des Elutionsverhalte
Anlage zur Teil-Akkreditierungsurkunde D-PL-14026-01-02 Gültig ab: 19.06.2025 Ausstellungsdatum: 19.06.2025 Seite 27 von 76 DIN EN 15935 2021-10 Boden, Abfall, Schlamm und behandelter Bioabfall - Bestimmung des Glühverlust
Anlage zur Teil-Akkreditierungsurkunde D-PL-21137-01-02 Gültig ab: 15.05.2025 Ausstellungsdatum: 15.05.2025 Seite 5 von 7 - Zweitschrift - ANLAGE 3: INDIKATORPARAMETER Teil I: Allgemeine Indikatorparameter Parameter Verfahren
Annex to the Partial Accreditation Certificate D-PL-21568-01-02 Valid from: 11.04.2025 Date of issue: 11.04.2025 Page 5 of 6 This document is a translation. The definitive version is the original German annex to the accreditation cer
Anlage zur Akkreditierungsurkunde D-PL-21810-02-00 ANLAGE 1: MIKROBIOLOGISCHE PARAMETER nicht belegt ANLAGE 2: CHEMISCHE PARAMETER nicht belegt ANLAGE 3: INDIKATORPARAMETER Teil I: Allgemeine lndikatorparameter DAkkS Deutsche Akkreditierung
Anlage zur Teil-Akkreditierungsurkunde D-PL-19589-01-01 Gültig ab: 21.03.2025 Ausstellungsdatum: 21.03.2025 Seite 6 von 8 - Zweitschrift - ANLAGE 3: INDIKATORPARAMETER Teil I: Allgemeine Indikatorparameter Parameter Verfahren A
Anlage zur Akkreditierungsurkunde D-PL-22808-01-00 Gültig ab: 09.10.2024 Ausstellungsdatum: 09.10.2024 Seite 8 von 10 Parameter Verfahren Trihalogenmethane (THM) nicht belegt Vinylchlorid nicht belegt ANLAGE 3: INDIKATORPARAME
Top matrices for EN 27888 1993-11 in Germany
Top analytes for EN 27888 1993-11 in Germany
- Coliform Bacteria (2)
- Clostridium Perfringens (2)
- Elektrischen Leitfähigkeit (1)
- Glühverlust (1)
- Legionella (1)
About ISO/IEC 17025 in Germany
Deutsche Akkreditierungsstelle (DAKKS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Germany.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.