Plastics Testing Labs in Germany
80 laboratories in Germany are accredited by DAKKS under ISO/IEC 17025 to perform Plastics testing. Common methods used to test Plastics in Germany: iso-178, iso-868, en-iso-9001. Most frequently tested analytes in this matrix in Germany: Gesamtmigration, Hardness, Density. Accredited providers include TBD Technische Bau Dienstleistungen, Technologie-Zentrum für Oberflächentechnik und Umweltschutz Leipzig GmbH Labor für Umwelterprobung und Werkstoffprüfung, Sächsisches Textilforschungsinstitut e. V. Prüfstelle, MD ELEKTRONIK GmbH MD Test Laboratory (Prüflabor), SAS hagmann GmbH & Co. KG. Sites located in Leipzig, Magdeburg, Friedeburg, Chemnitz, Waldkraiburg.
Accredited Labs
Anlage zur Teil-Akkreditierungsurkunde D-PL-18477-01-01 Gültig ab: 28.02.2025 Ausstellungsdatum: 28.02.2025 Seite 4 von 9 DIN EN 12680-2 2003-06 Gießereiwesen - Ultraschallprüfung - Teil 2: Stahlgussstücke für hoch beansprucht
Anlage zur Akkreditierungsurkunde D-PL-11034-01-00 Gültig ab: 14.06.2022 Ausstellungsdatum: 14.06.2022 Seite 4 von 9 1 Beispielhafte Prüfverfahren 1.1 Prüfungen technischer Produkte auf Beständigkeit gegen klimatische, me
Anlage zur Teil-Akkreditierungsurkunde D-PL-11239-01-01 DIN EN ISO 1183-1 2019-09 DIN EN 1492-1 2009-05 DIN EN ISO 9163 2005-07 DIN EN ISO 11058 2019-09 DIN EN 12447 2021-11 DIN EN ISO 12960 2020-09 DIN EN ISO 13438 2019-05 DIN EN 14575 200
Anlage zur Akkreditierungsurkunde D-PL-19548-01-01 Gültig ab: 11.12.2025 Ausstellungsdatum: 22.01.2026 Seite 5 von 5 DIN EN ISO 11357 -3 2018-07 Kunststoffe – Dynamische Differenz -Thermoanalyse (DSC) – Teil 3: Bestimmung d
Annex to the Accreditation Certificate D-PL-19422-01-01 Valid from : 31.07.2024 Date of issue : 31.07.2024 Page 2 of 3 This document is a translation. The definitive version is the original German annex to the accreditation certif
Anlage zur Akkreditierungsurkunde D-PL-11052-03-01 Gültig ab: 06.08.2025 Ausstellungsdatum: 06.08.20 25 Seite 6 von 8 DIN EN ISO 1133 -2 2012-03 Kunststoffe ‒ Bestimmung der Schmelze -Massefließrate (MFR) und der Schmelze-Vo
Anlage zur Akkreditierungsurkunde D-PL-17789-01-02 Gültig ab: 14.11.2022 Ausstellungsdatum: 24.10.2025 Seite 6 von 6 4.3 Bestimmung dielektrischer Eigenschaften mittels Gleichspannungsverfahren DIN EN 62631 -3-2 VDE 0307-3-
Anlage zur Teil-Akkreditierungsurkunde D-PL-14115-02-09 Gültig ab: 23.05.2025 Ausstellungsdatum: 23.05.2025 Seite 16 von 29 PV 3964 2008 -02 Oberflächen im Fahrzeuginnenraum – Prüfung der Cremebeständigkeit ATH TL 2
Annex to the accreditation certificate D-PL-19253-01-00 Valid from: 04.10.2021 Date of issue: 05.07.2022 Page 2 of 7 - Translation - DIN ISO 3689 1994 -07 Paper and board; determination of bursting strength after immersion
Anlage zur Akkreditierungsurkunde D-PL-17186-01-07 Gültig ab: 04.01.2023 Ausstellungsdatum: 12.09.2025 Seite 2 von 6 Prüfungen in den Bereichen: Mechanisch-technologische Prüfungen und Farbechtheitsprüfungen an Kunststoffen und
Anlage zur Akkreditierungsurkunde D-PL-14081-01-01 Gültig ab: 22.07.2025 Ausstellungsdatum: 22.07.2025 Seite 37 von 39 - Zweitschrift - 5.3.5 Bestimmung der Partikelgröße durch Klassierun g [Flex B] DIN EN 1235 2003-08
Annex to the Accreditation Certificate D-PL-18686-01-00 K DAkkS Deutsche Akkreditierungsstelle ISO 1183-1 Plastics - Methods for determining the density of non-cellular 2019-03 plastics - Part 1: Immersion method, liquid pyknometer method a
Anlage zur Akkreditierungsurkunde D-PL-19907-01-01 Gültig ab: 19.02.2026 Ausstellungsdatum: 19.02.2026 Seite 8 von 9 8 Optische Funkenemissionsspektrometrie [Flex A] DIN EN 14726 2019-06 Aluminium und Aluminiumlegierungen
Annex to the Partial Accreditation Certificate D-PL-18869-01-01 Valid from : 11.01.2024 Date of issue : 11.01.2024 Page 20 of 23 This document is a translation. The definitive version is the original German annex to the accredit
Anlage zur Akkreditierungsurkunde D-PL-14001-01-02 Gültig ab: 05.09.2025 Ausstell ungsdatum: 05.09.2025 Seite 9 von 11 ASU B 80.30 -4 2008-10 Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln – Kunststoffe – Teil 1: Le
Annex to the accreditation certificate D-PL-20563-01-00 Valid from: 30.11.2021 Date of issue: 30.11.2021 Page 9 of 10 - Translation - 3.2 Spectrometric analysis (*In-house test methods are excluded to the flexible scope)
Anlage zur Akkreditierungsurkunde D-PL-19570-02-00 Gültig ab: 16.12.2020 Ausstellungsdatum: 16.12.2020 Seite 11 von 15 DIN EN 1186-5 2002-07 Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Kunststoffe - Teil 5: Prü
Diese Urkundenanlage gilt nur zusammen mit der schriftlich erteilten Urkunde und gibt den Stand zum Zeitpunkt des Ausstellungsdatums wieder. Der jeweils aktuelle Stand der gültigen und überwachten Akkreditierung ist der Datenbank akkredit
Anlage zur Akkreditierungsurkunde D-PL-21644-01-01 Gültig ab: 30.04.2025 Ausstellungsdatum: 30.04.2025 Seite 3 von 6 2 Bestimmung rheologischer und tribologischer Werks toffeigenschaften von Kunststoffen [Flex A] DIN EN ISO
Anlage zur Teil-Akkreditierungsurkunde D-PL-14160-01-01 Gültig ab: 22.03.2024 Ausstellungsdatum: 22.03.2024 Seite 16 von 17 4.2 Bestimmung der Gesamtmigration an Bedarfsgegen ständen mittels gravimetrischer Untersuchungen *
This certificate annex is only valid together with the written accreditation certificate and reflects the status as indicated by the date of issue. The current status of any given scope of accreditation can be found in the directory of acc
Annex to the Partial Accreditation Certificate D-PL-20273-01-01 Valid from : 18.03.2025 Date of issue : 25.03.2025 Page 2 of 5 Tests in the fields: Physical-mechanical and chemical material tests of solid fuels, carbon material
Anlage zur Akkreditierungsurkunde D-PL-11243-01-02 Gültig ab: 15.10.2025 Ausstellungsdatum: 15.10.2025 Seite 6 von 14 ISO 13003 2003-12 Glasfaserverstärkte Kunststoffe – Bestimmung des Ermüdungs - verhaltens unter zyklische
Anlage zur Teil-Akkreditierungsurkunde D-PL-21128-01-01 Gültig ab: 08.07.2025 Ausstellungsdatum: 08.07.2025 Seite 5 von 6 1.2.5 Maßanalyse DIN 38405-1 1985-12 Bestimmung der Chlorid-Ionen (Modifikation: auf wässrige Lösungen/
Anlage zur Akkreditierungsurkunde D-PL-22846-02-01 Gültig ab: 30.07.2025 Ausstellungsdatum: 30.07.2025 Seite 5 von 5 4.3 Bestimmung und Einwirkung von Bakterien und Sch immelpilzen auf Gegenständen, Materialien mittels kulturel
Anlage zur Akkreditierungsurkunde D-PL-11021-01-01 Gültig ab: 15.07.2025 Ausstellungsdatum: 15.07.2025 Seite 29 von 49 EAD 340225 -00 -1109 Kunststoffkammern für den Zugang zu unterirdischen Netzwerken, die unter Schach
Anlage zur Teil-Akkreditierungsurkunde D-PL-11118-01-01 Gültig ab: 12.12.2024 Ausstellungsdatum: 12.12.2024 Seite 11 von 25 DIN EN 62321 -3-1 VDE 0042-1-3-1 2014-10 Verfahren zur Bestimmung von bestimmten Substanzen in Prod
Anlage zur Teil-Akkreditierungsurkunde D-PL-18174-01-02 Gültig ab: 10.03.2025 Ausstellungsdatum: 10.03.2025 Seite 5 von 9 Parameter § 2a Abs. 7 und § 4 Abs. 9 BioAbfV Salzgehalt DIN EN 13038:2012 -01 Organische Substanz
Anlage zur Teil-Akkreditierungsurkunde D-PL-14364-01-03 Gültig ab: 31.03.2025 Ausstellungsdatum: 31.03.2025 Seite 2 von 5 Flexibler Akkreditierungsbereich: Dem Prüflaboratorium ist, ohne dass es einer vorherigen Information und Zu
Anlage zur Teil-Akkreditierungsurkunde D-PL-11336-01-01 Gültig ab: 30.04.2024 Ausstellungsdatum: 30.04.2024 Seite 5 von 9 ASTM D 6415 / D 6415Ma * 2022 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinfo
Showing labs 51–80 of 80. Use pagination below to see more.
Top methods used to test Plastics in Germany
Top analytes for Plastics in Germany
- Gesamtmigration (5)
- Hardness (4)
- Density (3)
- Formaldehyd (3)
- Lead (3)
About ISO/IEC 17025 in Germany
Deutsche Akkreditierungsstelle (DAKKS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Germany.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.
Related searches
- United States (38)
- United Kingdom (12)
- CA (6)
- JP (3)
- MX (1)
- Netherlands (1)