United States
Trescal, Inc. - Norfolk, NC
ELIZABETH CITY, NC, United States
Visit websiteA2LA 2737.02ISO/IEC 17025Register refreshed 2026-10-23
- Scope lines
- 41
- A2LA certificate
- 1
- Sites in our directory
- 2
A2LA accredited scope
What this lab is accredited for
We could not match the method references in this lab’s scope to published test standard numbers. The full scope as published is below.
Only this lab. Searches the method, matrix and range of each of the 41 scope lines.
A2LA certificate 2737.02 · 41 lines
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; ANSI/NCSL Z540.3-2006 | - | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 2 of 40
Parameter/Equipment
Range
CMC2 (±)
Comments
Cylindrical Diameters
– External
Up to 12.1 in
120 µin + 3.5 µin/in
GageMaker MicTrac w/
gage blocks
Tape Measure & Steel
Ruler3 (No Tension)
Up to 36 in
(3 to 300) ft
0.0023 in
0.0046 in + 6.1 µin/in
Gage blocks
Stanley 34-762 tape
measure
II. Dimensional Testing/Calibration
Parameter/Equipment
Range
CMC2 (±)
Comments
1D – Length
Up to 12.1 in
120 µin + 3.5 µin/in
GageMaker MicTrac w/
gage blocks
III. Electrical – DC/Low Frequency
Parameter/Equipment
Range
CMC2, 4 (±)
Comments
DC Voltage3 –
Generate
(0 to 220) mV
(0.22 to 2.2) V
(2.2 to 11) V
(11 to 22) V
(22 to 220) V
(220 to 1100) V
(0 to 120) mV
(0 to 1.2) V
(0 to 12) V
(0 to 120) V
(0 to 1020) V
6 nV/mV + 0.5 µV
3.5 µV/V + 0.7 µV
2.5 µV/V + 2.9 µV
2.4 µV/V + 6.7 µV
3.4 µV/V + 70 µV
4.2 µV/V + 0.83 mV
0.8 µV + 9.3 µV/V
1.9 µV + 5.8 µV/V
10 µV + 6.2 µV/V
0.1 mV + 8.5 µV/V
1 mV + 8.5 µV/V
Fluke 5720A
Fluke 5560A
DC Voltage3 –
Measure
(0 to 200) mV
(0.2 to 2) V
(2 to 20) V
(20 to 200) V
(200 to 1000) V
0.24 µV + 5.0 µV/V
1.1 µV + 3.7 µV/V
10 µV + 3.0 µV/V
0.88 mV + 3.2 µV/V
1.4 mV + 5.0 µV/V
Fluke 8508A | ||
| 3 | - | DC High Voltage; DC CurrentShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 3 of 40
Parameter/Equipment
Range
CMC2, 4, 5 (±)
Comments
DC High Voltage3 –
Generate & Measure
Measure
(1 to 10) kV
(10 to 70) kV
0.38 V + 0.36 mV/V
4.9 V + 0.49 mV/V
Vitrek 4700 w/
HVL-70
DC Current3 – Generate
Clamps / Loops
(0 to 220) µA
(0.22 to 2.2) mA
(2.2 to 22) mA
(22 to 220) mA
(0.22 to 2.2) A
(1.1 to 2.999 99) A
(1.1 to 10.9999) A
(11 to 20.5) A
(0 to 120) µA
(0 to 1.2) mA
(0 to 12) mA
(0 to 120) mA
(0 to 1.2) A
(0 to 3.1) A
(0 to 12) A
(0 to 30.2) A
(10 to 16.5) A
(16.5 to 150) A
(150 to 1025) A
6.1 nA + 35 pA/µA
13 nA + 28 nA/mA
0.18 µA + 25 nA/mA
1.3 µA + 1.0 mA/A
85 µA + 82 µA/A
1.1 mA + 0.30 mA/A
8.2 mA + 0.39 mA/A
17 mA + 0.78 mA/A
6 nA + 97 µA/A
15 nA + 78 µA/A
82 nA + 78 µA/A
0.82 µA + 78 µA/A
10 µA + 0.12 mA/A
0.15 mA + 0.23 mA/A
0.25 mA + 0.23 mA/A
0.5 mA + 0.78 mA/A
50 mA + 6.5 mA/A
0.18 A + 3.4 mA/A
0.83 A + 3.3 mA/A
Fluke 5720A
Fluke 5522A
Fluke 5560A
Fluke 5520A w/
5500A/coil
DC Current3 – Measure
(0 to 100) nA
100 nA to 1 µA
(1 to 10) µA
(10 to 100) µA
100 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
100 mA to 1 A
(0 to 2) A
(2 to 20) A
(20 to 100) A
(100 to 500) A
46 pA + 30 µA/A
3.0 pA + 24 µA/A
0.44 nA + 19 µA/A
0.26 nA + 16 µA/A
0.15 µA + 1.5 mA/A
92 nA + 16 µA/A
0.92 µA + 32 µA/A
2.4 µA + 0.10 mA/A
26 µA + 0.18 mA/A
0.56 mA + 0.54 mA/A
0.046 %
0.66 %
Agilent 3458A
Fluke 8508A
3458A & current
shunts | - |
| 4 | - | DC ResistanceShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 4 of 40
Parameter/Equipment
Range
CMC2, 4 (±)
Comments
DC Resistance3 –
Generate
0 Ω
1 Ω
1.9 Ω
10 Ω
19 Ω
100 Ω
190 Ω
1 kΩ
1.9 kΩ
10 kΩ
19 kΩ
100 kΩ
190 kΩ
1 MΩ
1.9 MΩ
10 MΩ
19 MΩ
100 MΩ
(0 to 10.9999) Ω
(11 to 32.9999) Ω
(33 to 109.9999) Ω
(110 to 329.9999) Ω
330 Ω to 1.099 99 kΩ
(1.1 to 3.299 999) kΩ
(3.3 to 10.999 99) kΩ
(11 to 32.999 99) kΩ
(33 to 109.9999) kΩ
(110 to 329.9999) kΩ
330 kΩ to 1.099 999 MΩ
(1.1 to 3.299 999) MΩ
(3.3 to 10.999 99) MΩ
(11 to 32.999 99) MΩ
(33 to 109.9999) MΩ
(110 to 329.9999) MΩ
(330 to 1100) MΩ
(0 to 12) Ω
(12 to 120) Ω
120 Ω to 1.2 kΩ
(1.2 to 12) kΩ
(12 to 120) kΩ
120 kΩ to 1.2 MΩ
(1.2 to 12) MΩ
(12 to 120) MΩ
(120 to 1200) MΩ
50 µΩ
96 µΩ
0.18 mΩ
0.28 mΩ
0.52 mΩ
1.3 mΩ
2.4 mΩ
9.0 mΩ
17 mΩ
90 mΩ
0.17 Ω
1.1 Ω
2.2 Ω
20 Ω
40 Ω
0.43 kΩ
0.98 kΩ
50 kΩ
1.1 mΩ + 24 µΩ/Ω
1.5 mΩ + 24 µΩ/Ω
1.9 mΩ + 23 µΩ/Ω
4.1 mΩ + 22 µΩ/Ω
9.2 mΩ + 22 µΩ/Ω
42 mΩ + 22 µΩ/Ω
93 mΩ + 22 µΩ/Ω
0.41 Ω + 22 µΩ/Ω
0.91 Ω + 23 µΩ/Ω
8.6 Ω + 26 µΩ/Ω
14 Ω + 25 µΩ/Ω
90 Ω + 47 µΩ/Ω
0.39 kΩ + 0.10 mΩ/Ω
4.2 kΩ + 0.19 mΩ/Ω
15 kΩ + 0.39 mΩ/Ω
0.34 MΩ + 2.3 mΩ/Ω
4.2 MΩ + 12 mΩ/Ω
1 mΩ + 19 µΩ/Ω
1.2 mΩ + 19 µΩ/Ω
4.4 mΩ + 19 µΩ/Ω
44 mΩ + 19 µΩ/Ω
0.44 Ω + 19 µΩ/Ω
4.4 Ω + 19 µΩ/Ω
63 Ω + 27 µΩ/Ω
6.5 kΩ + 0.33 mΩ/Ω
0.47 MΩ + 3.1 mΩ/Ω
Fluke 5720A
Fluke 5522A
Fluke 5560A | See scope document |
| 5 | - | DC Resistance; Electrical Calibration of Thermocouples & IndicatorsShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 5 of 40
Parameter/Equipment
Range
CMC2, 4, 5 (±)
Comments
DC Resistance3 –
Generate, Fixed Points,
High Voltage
Up to 20 V
Up to 100 V
Up to 1000 V
Up to 5000 V
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
100 MΩ
1 GΩ
10 GΩ
100 GΩ
1 TΩ
10 TΩ
10 MΩ
100 MΩ
1 GΩ
10 GΩ
100 GΩ
1 TΩ
10 TΩ
0.0013 %
0.0013 %
0.0013 %
0.0022 %
0.004 %
0.012 %
0.062 %
0.24 %
0.36 %
0.51 %
1.5 %
0.54 %
0.5 %
0.5 %
0.5 %
0.51 %
0.51 %
2.8 %
IET VRS-100-11-
1K-BP-10KV
DC Resistance3 –
Measure
(0 to 10) Ω
(10 to 100) Ω
(0.1 to 1) kΩ
(1 to 10) kΩ
(10 to 100) kΩ
(0.1 to 1) MΩ
(1 to 10) MΩ
(10 to 100) MΩ
(0.1 to 1) GΩ
77 µΩ + 15 µΩ/Ω
0.74 mΩ + 11 µΩ/Ω
2.0 mΩ + 8.0 µΩ/Ω
20 mΩ + 8.0 µΩ/Ω
0.20 Ω + 8.0 µΩ/Ω
4.4 Ω + 14 µΩ/Ω
0.18 kΩ + 54 µΩ/Ω
4.2 kΩ + 0.52 mΩ/Ω
0.31 MΩ + 5.1 mΩ/Ω
HP 3458A
DC Resistance3 –
Measure
10 mΩ
100 mΩ
0.0014 %
0.0028 %
Current shunts &
8508A
Electrical Calibration
of Thermocouples &
Indicators3 –
Type B
(600 to 800) °C
(800 to 1000) °C
(1000 to 1550) °C
(1550 to 1820) °C
0.34 ᵒC
0.26 ᵒC
0.23 ᵒC
0.26 ᵒC
Fluke 5522A | - |
| 6 | - | thermocouples; indicatorsShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 6 of 40
Parameter/Equipment
Range
CMC2 (±)
Comments
Electrical Calibration
of Thermocouples &
Indicators3 – (cont)
Type C
Type E
Type J
Type K
Type L
Type N
Type R
Type S
Type T
(0 to 150) °C
(150 to 650) °C
(650 to 1000) °C
(1000 to 1800) °C
(1800 to 2316) °C
(-250 to -100) °C
(-100 to -25) °C
(-25 to 350) °C
(350 to 650) °C
(650 to 1000) °C
(-210 to -100) °C
(-100 to - 30) °C
(-30 to 150) °C
(150 to 760) °C
(760 to 1200) °C
(-200 to -100) °C
(-100 to -25) °C
(-25 to 120) °C
(120 to 1000) °C
(1000 to 1372) °C
(-200 to -100) ᵒC
(-100 to 800) ᵒC
(800 - 900) ᵒC
(-200 to -100) °C
(-100 to - 25) °C
(-25 to 120) °C
(120 to 410) °C
(410 to 1300) °C
(0 to 250) °C
(250 to 400) °C
(400 to 1000) °C
(1000 to 1767) °C
(0 to 250) °C
(250 to 1000) °C
(1000 to 1400) °C
(1400 to 1767) °C
(-250 to -150) °C
(-150 to 0) °C
(0 to 120) °C
(120 to 400) °C
0.23 ᵒC
0.2 ᵒC
0.24 ᵒC
0.39 ᵒC
0.65 ᵒC
0.39 ᵒC
0.13 ᵒC
0.12 ᵒC
0.13 ᵒC
0.17 ᵒC
0.21 ᵒC
0.13 ᵒC
0.12 ᵒC
0.14 ᵒC
0.18 ᵒC
0.26 ᵒC
0.15 ᵒC
0.13 ᵒC
0.21 ᵒC
0.31 ᵒC
0.29 ᵒC
0.20 ᵒC
0.13 ᵒC
0.31 ᵒC
0.18 ᵒC
0.15 ᵒC
0.15 ᵒC
0.21 ᵒC
0.44 ᵒC
0.28 ᵒC
0.26 ᵒC
0.31 ᵒC
0.37 ᵒC
0.28 ᵒC
0.29 ᵒC
0.36 ᵒC
0.49 ᵒC
0.21 ᵒC
0.15 ᵒC
0.14 ᵒC
Fluke 5522A | See scope document |
| 7 | - | Thermocouples & Indicators; RTD IndicatorsShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 7 of 40
Parameter/Equipment
Range
CMC2 (±)
Comments
Electrical Calibration
of Thermocouples &
Indicators3 – (cont)
Type U
(-200 to 0) °C
(0 to 600) °C
0.47 ᵒC
0.21 ᵒC
Fluke 5522A
Electrical Calibration of
RTD Indicators3 –
Pt 385, 100 Ω
Pt 3926, 100 Ω
Pt 3916, 100 Ω
Pt 385, 100 Ω
(-200 to -80) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 300) °C
(300 to 400) °C
(400 to 630) °C
(630 to 800) °C
(-200 to -80) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 300) °C
(300 to 400) °C
(400 to 630) °C
(-200 to -190) °C
(-190 to -80) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 260) °C
(260 to 300) °C
(300 to 400) °C
(400 to 600) °C
(600 to 630) °C
(-200 to -80) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 260) °C
(260 to 300) °C
(300 to 400) °C
(400 to 600) °C
(600 to 630) °C
0.057 ᵒC
0.056 ᵒC
0.068 ᵒC
0.081 ᵒC
0.088 ᵒC
0.10 ᵒC
0.19 ᵒC
0.056 ᵒC
0.056 ᵒC
0.068 ᵒC
0.081 ᵒC
0.088 ᵒC
0.10 ᵒC
0.20 ᵒC
0.051 ᵒC
0.056 ᵒC
0.062 ᵒC
0.068 ᵒC
0.074 ᵒC
0.081 ᵒC
0.041 ᵒC
0.18 ᵒC
0.051 ᵒC
0.051 ᵒC
0.051 ᵒC
0.057 ᵒC
0.10 ᵒC
0.11 ᵒC
0.12 ᵒC
0.13 ᵒC
Fluke 5522A | See scope document |
| 8 | - | RTD Indicators; Oscilloscope; Power meter w/ power sensorsShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 8 of 40
Parameter/Equipment
Range
CMC2, 5 (±)
Comments
Electrical Calibration of
RTD Indicators3 – (cont)
Pt 385, 500 Ω
Pt 385, 1000 Ω
PtNi 385, 120 Ω
Cu 427.10 Ω
(-200 to -80) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 260) °C
(260 to 300) °C
(300 to 400) °C
(400 to 600) °C
(600 to 630) °C
(-200 to -80) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 260) °C
(260 to 300) °C
(300 to 400) °C
(400 to 600) °C
(600 to 630) °C
(-80 to 0) °C
(0 to 100) °C
(100 to 260) °C
(-100 to 260) °C
0.051 ᵒC
0.056 ᵒC
0.056 ᵒC
0.062 ᵒC
0.074 ᵒC
0.074 ᵒC
0.081 ᵒC
0.095 ᵒC
0.047 ᵒC
0.047 ᵒC
0.051 ᵒC
0.057 ᵒC
0.062 ᵒC
0.068 ᵒC
0.068 ᵒC
0.18 ᵒC
0.062 ᵒC
0.062 ᵒC
0.11 ᵒC
0.23 ᵒC
Fluke 5522A
Oscilloscope3–
DC into 50 Ω Load
DC into 1 MΩ Load
Rise Time
Bandwidth
(-6.6 to 6.6) V
(-130 to 130) V
≤ 300 ps (Up to 2 MHz)
≤ 350 ps (Above 2 MHz)
50 kHz (reference)
50 kHz to 100 MHz
(100 to 300) MHz
(300 to 600) MHz
(600 to 1100) MHz
(1.1 to 16) GHz
(16 to 18) GHz
(18 to 26.5) GHz
(26.5 to 33) GHz
(33 to 35) GHz
(35 to 40) GHz
(40 to 47) GHz
(47 to 50) GHz
33 µV + 2 mV/V
33 µV + 0.39 mV/V
82 ps
82 ps
0.33 mV + 17 mV/V
0.4 mV + 31 mV/V
0.43 mV + 36 mV/V
0.53 mV + 57 mV/V
0.58 mV + 67 mV/V
3.1 %
3.3 %
4.1 %
4.3 %
4.5 %
4.7 %
5.1 %
5.6 %
Fluke 5520A-
SC1100
Power meter w/
power sensors | - |
| 9 | - | 50 Ω LoadShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 9 of 40
Parameter/Equipment
Range
CMC2, 4, 5 (±)
Comments
Oscilloscope3– (cont)
Time Markers:
Source & Period
into a 50 Ω Load
Amplitude:
1 MΩ, 10 Hz to 1 kHz
1 MΩ, (1 to 10) kHz
50 Ω
5 s to 50 ms
50 ms to 1 ns
1 mV to 130 V(pk-pk)
1 mV to 130 V(pk-pk)
1.0 mV to 6.6 V(pk-pk)
0.000 63 % + t x 0.1 %
0.000 52 %
0.2 mV + 0.8 mV/V
0.24 mV + 2 mV/V
91 µV mV + 4.3 mV/V
Fluke 5520A-
SC1100
t = time in
seconds
DC Power3 – Generate
Up to 330 µA
Up to 3.3 mA
Up to 33 mA
Up to 330 mA
Up to 1.1 A
Up to 3 A
Up to 11 A
Up to 20.5 A
Up to 120 µA
Up to 1.2 mA
Up to 12 mA
Up to 120 mA
Up to 1.2 A
Up to 3.1 A
Up to 12 A
Up to 30.2 A
Up to 1020 V
Up to 337 mW
(0.337 to 3.366) W
(3.366 to 33.66) W
(33.66 to 336.6) W
(0.3366 to 1.122) kW
(1.122 to 3.06) kW
(3.06 to 11.22) kW
(11.22 to 20.91) kW
Up to 1020 V
Up to 122 mW
(0.12 to 1.224) W
(1.225 to 12.24) W
(12.24 to 122.4) W
(0.1224 to 1.224) kW
(1.224 to 3.162) kW
(3.162 to 12.24) kW
(12.24 to 30.8) kW
0.017 %
0.021 %
0.0093 %
0.0093 %
0.019 %
0.043 %
0.044 %
0.13 %
0.015 %
0.0092 %
0.0087 %
0.0087 %
0.013 %
0.028 %
0.025 %
0.08 %
Fluke 5522A
Fluke 5560A | See scope document |
| 10 | - | AC PowerShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 10 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
AC Power3 –
Generate See Table below See Table below Fluke 5522A
(45 to 65) Hz
(3.366
to
33.66)
W
(33.66 to
336.6) W
(0.3366 to
1.122) kW
(1.122 to
3.06) kW
(3.06 to
11.22) kW
(11.22 to 20.9)
kW
Ø 0 °
PF=1.000 0.052 % 0.068 % 0.076 % 0.083 % 0.17 %
Ø 10 °
PF=0.985 0.06 % 0.075 % 0.082 % 0.088 % 0.18 %
Ø 20 °
PF=0.940 0.082 % 0.093 % 0.099 % 0.1 % 0.18 %
Ø 30 °
PF=0.866 0.11 % 0.12 % 0.13 % 0.2 %
Ø 40 °
PF=0.766 0.16 % 0.17 % 0.23 %
Ø 50 °
PF=0.643 0.21 % 0.22 % 0.27 %
Ø 60 °
PF=0.500 0.31 % 0.35 %
Ø 70 °
PF=0.342 0.48 % 0.49 % 0.51 %
Ø 80 °
PF=0.174 0.99 % 1 %
(65 to 500) Hz (33.66 to
336.6) W
(0.3366 to
1.122) kW
(1.122 to 3.06)
kW
(3.06 to 11.22)
kW
(11.22 to 20.9)
kW
Ø 0 °
PF=1.000 0.052 % 0.068 % 0.076 % 0.12 % 0.21 %
Ø 10 °
PF=0.985 0.094 % 0.1 % 0.11 % 0.14 % 0.22 %
Ø 20 °
PF=0.940 0.17 % 0.18 % 0.2 % 0.26 %
Ø 30 °
PF=0.866 0.26 % 0.28 % 0.33 %
Ø 40 °
PF=0.766 0.37 % 0.39 % 0.42 %
Ø 50 °
PF=0.643 0.53 % 0.56 %
Ø 60 °
PF=0.500 0.76 % 0.77 % 0.78 %
Ø 70 °
PF=0.342 1.2 %
Ø 80 °
PF=0.174 2.5 % | - |
| 11 | - | AC PowerShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 11 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
AC Power – Generate3 (cont)
See Table below
See Table below
Fluke 5560A
500 Hz to 1
kHz
(33.66 to
336.6) W
(0.3366 to
1.122) kW (1.122 to 3.06) kW (3.06 to
11.22) kW
(11.22 to
20.9) kW
Ø 0 °
PF=1.000 0.052 % 0.068 % 0.076 % 0.12 % 0.21 %
(45 to 65) Hz (1.22 to
12.2) W
(12.2 to
122) W
(0.122 to
1.22) kW
(1.22 to 3.16)
kW
(3.16 to
12.2) kW
(12.2 to 30.8)
kW
Ø 0 °
PF=1.000 0.038 % 0.029 % 0.034 % 0.048 % 0.04 % 0.11 %
Ø 10 °
PF=0.985 0.049 % 0.042 % 0.046 % 0.057 % 0.051 % 0.11 %
Ø 20 °
PF=0.940 0.074 % 0.07 % 0.072 % 0.079 % 0.075 % 0.12 %
Ø 30 °
PF=0.866 0.11 % 0.15 %
Ø 40 °
PF=0.766 0.15 %
Ø 50 °
PF=0.643 0.21 %
Ø 60 °
PF=0.500 0.3 %
Ø 70 °
PF=0.342 0.48 %
Ø 80 °
PF=0.174 0.99 %
(65 to 500)
Hz
(12.2 to 122)
W
(0.122 to 1.22)
kW
(1.22 to 3.16)
kW
(3.16 to 12.2)
kW (12.2 to 30.8) kW
Ø 0 °
PF=1.000 0.029 % 0.034 % 0.048 % 0.04 % 0.11 %
Ø 10 °
PF=0.985 0.068 % 0.071 % 0.078 % 0.074 % 0.12 %
Ø 20 °
PF=0.940 0.14 % 0.17 %
Ø 30 °
PF=0.866 0.2 % 0.21 % 0.23 %
Ø 40 °
PF=0.766 0.29 % 0.3 % 0.31 %
Ø 50 °
PF=0.643 0.42 %
(65 to 500)
Hz
(12.2 to 122)
W
(0.122 to
1.22) kW (1.22 to 3.16) kW (3.16 to
12.2) kW
(12.2 to 30.8)
kW
Ø 60 °
PF=0.500 0.61 % | - |
| 12 | - | AC PowerShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 12 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
AC Power – Generate3 (cont)
See Table below
See Table below
Fluke 5560A
(65 to 500)
Hz
(12.2 to
122) W
(0.122 to 1.22)
kW (1.22 to 3.16) kW (3.16 to
12.2) kW
(12.2 to
30.8) kW
Ø 70 °
PF=0.342 0.96 %
Ø 80 °
PF=0.174 2 %
500 Hz to 1
kHz
(12.2 to 122)
W
(0.122 to
1.22) kW
(1.22 to 3.16)
kW
(3.16 to 12.2)
kW
(12.2 to 30.8)
kW
Ø 0 °
PF=1.000 0.029 % 0.034 % 0.048 % 0.04 % 0.11 %
Ø 10 °
PF=0.985 0.13 % 0.16 %
Ø 20 °
PF=0.940 0.26% 0.28 %
Ø 30 °
PF=0.866 0.41% 0.42 %
Ø 40 °
PF=0.766 0.59 % 0.6 %
Ø 50 °
PF=0.643 0.83 %
Ø 60 °
PF=0.500 1.2 %
Ø 70 °
PF=0.342 1.9 %
Ø 80 °
PF=0.174 4 %
(1 to 5) kHz (6 to 60) W (60 to 600) W (0.6 to 1.55) kW
Ø 0 °
PF=1.000 0.071 % 0.082 %
Ø 10 °
PF=0.985 0.64 %
Ø 20 °
PF=0.940 1.3 %
Ø 30 °
PF=0.866 2 %
Ø 40 °
PF=0.766 2.8 %
Ø 50 °
PF=0.643 4 %
(5 to 10) kHz (3 to 30) W (30 to 300) W
Ø 0 °
PF=1.000 0.28 % 0.34 % | See scope document |
| 13 | - | AC Power; Duty Cycle; AC VoltageShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 13 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
AC Power – Generate3
(cont)
See Table below
See Table below
Fluke 5560A
(5 to 10) kHz (3 to 30) W (30 to 300) W
Ø 10 °
PF=0.985 1.4 %
Ø 20 °
PF=0.940 2.7 %
Ø 30 °
PF=0.866 4.2 %
(10 to 30)
kHz (3 to 300) W
Ø 0 °
PF=1.000 1.1 %
Ø 10 °
PF=0.985 3.4 %
Ø 20 °
PF=0.940 5.9%
Parameter/Equipment
Range
CMC2, 4, 5 (±)
Comments
Duty Cycle3 – Generate
(1 to 9.99) %
(10 to 49.99) %
50 %
(50.01 to 90) %
(90.01 to 99)
0.32 %
0.02 %
0.013 %
0.02 %
0.31 %
Fluke 5522A
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Voltage3 – Generate
Up to 2.2 mV
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.5 to 1) MHz
4.7 µV + 0.19 µV/mV
4.4 µV + 79 nV/mV
4.3 µV + 71 nV/mV
4.7 µV + 0.16 µV/mV
6 µV + 0.41 µV/mV
11 µV + 0.82 µV/mV
22 µV + 1.1 µV/mV
23 µV + 2.3 µV/mV
Fluke 5720A | - |
| 14 | - | AC VoltageShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 14 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Voltage3 – Generate
(cont)
(2.2 to 22) mV
(22 to 220) mV
(0.22 to 2.2) V
(2.2 to 22) V
(22 to 220) V
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.5 to 1) MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.5 to 1) MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.5 to 1) MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.5 to 1) MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz*
(300 to 500) kHz*
(0.5 to 1) MHz*
6.3 µV + 0.41 µV/mV
4.9 µV + 79 nV/mV
4.9 µV + 69 nV/mV
6 µV + 0.16 µV/mV
8.9 µV + 0.4 µV/mV
17 µV + 0.79 µV/mV
29 µV + 1.1 µV/mV
36 µV + 2.2 µV/mV
23 µV + 0.21 µV/mV
12 µV + 80 nV/mV
12 µV + 70 nV/mV
19 µV + 0.17 µV/mV
27 µV + 0.44 µV/mV
62 µV + 0.87 µV/mV
88 µV + 1.1 µV/mV
0.18 mV + 2.2 µV/mV
0.23 mV + 0.21 mV/V
81 µV + 77 µV/V
44 µV + 33 µV/V
88 µV + 58 µV/V
0.14 mV + 86 µV/V
0.43 mV + 0.31 mV/V
0.84 mV + 0.82 mV/V
1.7 mV + 1.2 mV/V
2.3 mV + 0.21 mV/V
0.81 mV + 76 µV/V
0.20 mV + 40 µV/V
0.65 mV + 64 µV/V
1 mV + 84 µV/V
3.3 mV + 0.25 mV/V
6.7 mV + 0.88 mV/V
10 mV + 1.2 mV/V
23 mV + 0.21 mV/V
8.5 mV + 75 µV/V
5.4 mV + 36 µV/V
7.3 mV + 67 µV/V
14 mV + 0.11 mV/V
54 mV + 0.79 mV/V
0.14 V + 4.2 mV/V
0.24 V + 7 mV/V
Fluke 5720A
* Limited
to 2.2E7 V-Hz | See scope document |
| 15 | - | AC VoltageShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 15 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Voltage3 – Generate
(cont)
(220 to 1100) V
(33 to 330) V
(330 to 1020) V
(15 to 50) Hz**
50 Hz to 1 kHz
45 Hz to 1 kHz
(1 to 10) kHz
(10 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
9.1 mV + 0.25 mV/V
78 mV + 57 µV/V
14 mV + 0.15 mV/V
18 mV + 0.16 mV/V
19 mV + 0.20 mV/V
20 mV + 0.25 mV/V
98 mV + 1.6 mV/V
0.11 V + 0.24 mV/V
96 mV + 0.20 mV/V
0.11 V + 0.23 mV/V
Fluke 5720A
**250V Max
Fluke 5522A
AC Voltage – Generate3
(1 to 12) mV
(12 to 120) mV
(0.12 to 1.2) V
(0.01 to 3) Hz
(3 to 5) Hz
(5 to 10) Hz
10 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.01 to 3) Hz
(3 to 5) Hz
(5 to 10) Hz
10 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.01 to 3) Hz
(3 to 5) Hz
(5 to 10) Hz
(10 to 40) Hz
40.01 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
0.11 mV + 50 mV/V
8.9 µV + 1.9 mV/V
7.7 µV + 0.68 mV/V
6.1 µV + 0.12 mV/V
6.3 µV + 0.29 mV/V
16 µV + 1.2 mV/V
36 µV + 6.2 mV/V
36 µV + 6.2 mV/V
1.2 mV + 50 mV/V
30 µV + 1.9 mV/V
15 µV + 0.68 mV/V
7.4 µV + 0.11 mV/V
11 µV + 0.27 mV/V
28 µV + 0.62 mV/V
49 µV + 1.6 mV/V
49 µV + 1.6 mV/V
12 mV + 50 mV/V
0.3 mV + 1.9 mV/V
0.15 mV + 0.68 mV/V
74 µV + 0.11 mV/V
21 µV + 0.11 mV/V
42 µV + 0.23 mV/V
0.11 mV + 0.54 mV/V
0.26 mV + 1.5 mV/V
0.26 mV + 1.5 mV/V
Fluke 5560A | See scope document |
| 16 | - | AC VoltageShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 16 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Voltage – Generate3
(cont)
(1.2 to 12) V
(12 to 120) V
(120 to 330) V
(330 to 1020) V
(0.01 to 3) Hz
(3 to 5) Hz
(5 to 10) Hz
(10 to 40) Hz
40.01 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(0.01 to 3) Hz
(3 to 5) Hz
(5 to 10) Hz
(10 to 40) Hz
40.01 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz *
(3 to 5) Hz
(5 to 10) Hz
10 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(3 to 5) Hz
(5 to 10) Hz
10 Hz to 10 kHz
0.12 V + 50 mV/V
3 mV + 1.9 mV/V
1.6 mV + 0.68 mV/V
0.49 mV + 0.11 mV/V
0.18 mV + 0.11 mV/V
0.33 mV + 0.23 mV/V
0.77 mV + 0.54 mV/V
2.5 mV + 1.6 mV/V
2.5 mV + 1.6 mV/V
1.2 V + 50 mV/V
30 mV + 1.9 mV/V
16 mV + 0.68 mV/V
4.8 mV + 0.11 mV/V
1.8 mV + 0.11 mV/V
3.3 mV + 0.23 mV/V
7.7 mV + 0.54 mV/V
39 mV + 1.6 mV/V
0.3 V + 1.9 mV/V
0.16 V + 0.68 mV/V
21 mV + 0.11 mV/V
36 mV + 0.23 mV/V
0.16 V + 1.2 mV/V
0.7 V + 1.9 mV/V
0.3 V + 0.68 mV/V
0.12 V + 0.11 mV/V
Fluke 5560A
* Max output 70 V
AC Voltage3 – Measure
(0 to 10) mV
(1 to 40) Hz
(40 to 1000) Hz
(1 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
300 kHz to 1 MHz
(1 to 4) MHz
(4 to 8) MHz
6.1 µV + 0.30 mV/V
4.1 µV + 0.20 mV/V
4.2 µV + 0.30 mV/V
4.9 µV + 1.0 mV/V
9.0 µV + 5.0 mV/V
45 µV + 40 mV/V
20 µV + 12 mV/V
0.44 mV + 70 mV/V
1.1 mV + 0.20 V/V
Agilent 3458A-002 | See scope document |
| 17 | - | AC VoltageShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 17 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Voltage3 – Measure
(cont)
(10 to 100) mV
(0.1 to 1) V
(1 to 10) V
(10 to 100) V
(100 to 1000) V
(10 to 40) Hz
(40 to 1000) Hz
(1 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
300 kHz to 1 MHz
(1 to 2) MHz
(2 to 4) MHz
(4 to 8) MHz
(8 to 10) MHz
(1 to 40) Hz
(40 to 1000) Hz
(1 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
300 kHz to 1 MHz
(1 to 2) MHz
(2 to 4) MHz
(4 to 8) MHz
(8 to 10) MHz
(1 to 40) Hz
(40 to 1000) Hz
(1 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
300 kHz to 1 MHz
(1 to 2) MHz
(2 to 4) MHz
(4 to 8) MHz
(8 to 10) MHz
(1 to 40) Hz
40 Hz to 1 kHz
(1 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
300 kHz to 1 MHz
(1 to 40) Hz
40 Hz to 1 kHz
(1 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
12 µV + 70 µV/V
10 µV + 70 µV/V
11 µV + 0.14 mV/V
12 µV + 0.30 mV/V
17 µV + 0.80 mV/V
47 µV + 3.0 mV/V
0.12 mV + 10 mV/V
3.8 mV + 15 mV/V
4.1 mV + 40 mV/V
8.9 mV + 40 mV/V
14 mV + 0.15 V/V
0.12 mV + 70 µV/V
0.10 mV + 70 µV/V
0.11 mV + 0.14 mV/V
0.12 mV + 0.30 mV/V
0.17 mV + 0.80 mV/V
0.47 mV + 3.0 mV/V
1.1 mV + 10 mV/V
38 mV + 15 mV/V
41 mV + 40 mV/V
89 mV + 40 mV/V
0.14 V + 0.15 V/V
1.2 mV + 70 µV/V
1.0 mV + 70 µV/V
1.1 mV + 0.14 mV/V
1.2 mV + 0.30 mV/V
1.7 mV + 0.80 mV/V
4.7 mV + 3.0 mV/V
12 mV + 10 mV/V
0.38 V + 15 mV/V
0.41 V + 40 mV/V
0.89 V + 40 mV/V
1.4 V + 0.15 V/V
13 mV + 0.20 mV/V
11 mV + 0.20 mV/V
11 mV + 0.20 mV/V
13 mV + 0.35 mV/V
21 mV + 1.2 mV/V
57 mV + 4.0 mV/V
0.17 V + 15 mV/V
99 mV + 0.40 mV/V
85 mV + 0.40 mV/V
99 mV + 0.60 mV/V
0.14 V + 1.2 mV/V
0.27 V + 3.0 mV/V
Agilent 3458A-002 | - |
| 18 | - | AC High Voltage; Inductance; CapacitanceShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 18 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC High Voltage3 –
Generate & Measure:
(1 to 10) kV
Measure:
(10 to 70) kV
(50 to 400) Hz
1.5 V + 1.4 mV/V
12 V + 1.2 mV/V
Vitrek 4700 w/ HVL-
70
Inductance3 – Measure
1 µH to 1 mH
(1 to 100) mH
100 mH to 5 H
(0.1 to 1) kHz
1.4 µH
0.10 mH
5.1 mH
GR 1689-M
CMC is stated at 1
kHz
Inductance3 – Generate
10 mH
100 mH
100 Hz
1 kHz
100 Hz
200 Hz
400 Hz
1 kHz
10 kHz
49 µH
27 µH
0.14 mH
0.13 mH
0.12 mH
0.12 mH
0.13 mH
General Radio 1482
standard inductors
Capacitance3 – Generate
(1 to 10) pF
(10 to 100) pF
(100 to 1000) pF
(1 to 10) nF
(10 to 100) nF
(100 to 1000) nF
(0.19 to 0.3999) nF
(0.4 to 1.0999) nF
(1.1 to 3.2999) nF
(3.3 to 10.9999) nF
(11 to 32.9999) nF
(33 to 109.999) nF
(110 to 329.999) nF
(0.33 to 1.0999) µF
(1.1 to 3.299 99) µF
(3.3 to 10.9999) µF
(11 to 32.9999) µF
(33 to 109.999) µF
(110 to 329.999) µF
(0.33 to 1.099 99) mF
(1.1 to 3.2999) mF
(3.3 to 10.9999) mF
10 Hz to 1 MHz
10 Hz to 10 kHz
10 Hz to 10 kHz
10 Hz to 3 kHz
10 Hz to 1 kHz
10 Hz to 1 kHz
10 Hz to 1 kHz
10 Hz to 1 kHz
(10 to 600) Hz
(10 to 300) Hz
(10 to 150) Hz
(10 to 120) Hz
(10 to 80) Hz
(10 to 50) Hz
(10 to 20) Hz
(0 to 6) Hz
(0 to 2) Hz
90 fF
90 fF
91 fF + 64 aF/pF
0.15 pF + 0.11 pF/nF
1.2 pF + 0.12 pF/nF
12 pF + 0.12 pF/nF
8.5 pF + 3.8 mF/F
9.4 pF + 3.9 mF/F
12 pF + 3.9 mF/F
15 pF + 2.0 mF/F
99 pF + 1.9 mF/F
0.14 nF + 1.9 mF/F
0.45 nF + 2.0 mF/F
1.4 nF + 2.1 mF/F
4.5 nF + 2.0 mF/F
14 nF + 2.0 mF/F
58 nF + 3.4 mF/F
0.20 µF + 3.6 mF/F
0.63 µF + 3.5 mF/F
1.9 µF + 3.5 mF/F
6.8 µF + 3.4 mF/F
38 µF + 2.4 mF/F
GR 1413
Fluke 5522A | - |
| 19 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 19 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Capacitance3 – Generate
(cont)
(11 to 32.9999) mF
(33 to 110) mF
200 pF to 1.2 nF
(1.2 to 12) nF
(> 3 to 12) nF
(12 to 120) nF
(> 30 to 120) nF
(0.12 to 1.2) µF
(1.2 to 12) µF
(12 to 120) µF
(0.12 to 1.2) mF
(1.2 to 12) mF
(12 to 120) mF
(0 to 0.6) Hz
(0 to 0.2) Hz
100 Hz to 10 kHz
150 Hz to 5 kHz
(10 to 150) Hz
200 Hz to 1.3 kHz
(10 to 200) Hz
(2 to 310) Hz
(0.5 to 110) Hz
(0.5 to 40) Hz
(0.1 to 11) Hz
(0.03 to 4) Hz
(0.01 to 1.3) Hz
88 µF + 5.8 mF/F
0.36 mF + 8.6 mF/F
2.4 pF + 0.86 mF/F
6.2 pF + 0.9 mF/F
7.8 pF + 0.9 mF/F
43 pF + 1 mF/F
61 pF + 1 mF/F
0.42 nF + 1 mF/F
4.2 nF + 1 mF/F
40 nF + 1.2 mF/F
0.48 µF + 1.9 mF/F
5.3 µF + 1.9 mF/F
77 µF + 3.9 mF/F
Fluke 5560A
Inductance – Generate3
(13 to 120) µH
(0.120 01 to 1.2) mH
(1.2001 to 3.3) mH
(3.3 to 12) mH
(12 to 83) mH
(490 to 550) Hz
(550 to 999) Hz
1 kHz
(1.001 to 13) kHz
(13 to 17) kHz
(260 to 330) Hz
(330 to 999) Hz
1 kHz
(1.001 to 1.6) kHz
(1.6 to 2.5) kHz
(0.5 to 999) Hz
110 Hz
(111 to 800) Hz
(800 to 980) Hz
(0.5 to 109) Hz
110 Hz
(111 to 1000) Hz
(1 to 1.4) kHz
(0.1 to 99) Hz
100 Hz
(101 to 180) Hz
(180 to 230) Hz
1.5 %
0.67 %
0.38 %
0.67 %
1.5 %
1.4 %
0.49 %
0.2 %
0.49 %
1.4 %
0.74 %
0.46 %
0.74 %
1.6 %
0.49 %
0.2 %
0.49 %
1.4 %
0.53 %
0.25 %
0.53 %
1.4 %
Fluke 5560A | ||
| 20 | - | InductanceShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 20 of 40
Parameter/Range
Frequency CMC2, 4, 5 (±) Comments
Inductance – Generate3
(cont)
(83 to 120) mH
(0.120 01 to 0.65) H
(0.65 to 1.2) H
(1.2001 to 5.5) H
(5.5 to 12) H
(12.001 to 30) H
(30 to 120) H
(0.1 to 99) Hz
100 Hz
(101 to 320) Hz
(320 to 1000) Hz
(0.05 to 9.9) Hz
10 Hz
(10.1 to 30) Hz
(30 to 50) Hz
(0.05 to 9.9) Hz
10 Hz
(10.1 to 100) Hz
(100 to 170) Hz
(0.01 to 2.99) Hz
3 Hz
(3.01 to 8) Hz
(8 to 16) Hz
(0.01 to 2.99) Hz
3 Hz
(3.01 to 19) Hz
(19 to 37) Hz
(0.005 to 1.99) Hz
2 Hz
(2.01 to 4) Hz
(4 to 16) Hz
(0.005 to 1.99) Hz
2 Hz
(2.01 to 7) Hz
(7 to 14) Hz
0.49 %
0.2 %
0.49 %
1.4 %
0.61 %
0.32 %
0.6 %
1.5 %
0.52 %
0.24 %
0.52 %
1.4 %
0.68 %
0.4 %
0.68 %
1.6 %
0.57 %
0.28 %
0.57 %
1.4 %
0.89 %
0.61 %
0.89 %
1.8 %
0.61 %
0.32 %
0.6 %
1.5 %
Fluke 5560A | See scope document |
| 21 | GR 1689-M | Capacitance; AC Current | See scope document |
| 22 | - | AC CurrentShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 22 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Current3 – Generate
(cont)
(11 to 20.5) A
Clamps / Loops3:
Toroidal:
(10 to 16.5) A
(16.5 to 150) A
(150 to 1025) A
(10 to 16.5) A
(16.5 to 150) A
(150 to 1025) A
Non-Toroidal:
(10 to 16.5) A
(16.5 to 150) A
(150 to 1025) A
(10 to 16.5) A
(16.5 to 150) A
(150 to 1025) A
(45 to 100) Hz
100 Hz to 1 kHz
(1 to 5) kHz
(45 to 65) Hz
(65 to 440) Hz
(45 to 65) Hz
(65 to 440) Hz
18 mA + 1.6 mA/A
20 mA + 1.7 mA/A
0.26 A + 23 mA/A
26 mA + 2.1 mA/A
50 mA + 1.9 mA/A
0.34 A + 1.9 mA/A
60 mA + 6 mA/A
0.11 A + 5.3 mA/A
0.86 A + 5.3 mA/A
60 mA + 3.8 mA/A
0.23 A + 3.7 mA/A
1.2 A + 3.7 mA/A
90 mA + 7.2 mA/A
0.28 A + 6.7 mA/A
1.6 A + 6.7 mA/A
Fluke 5522A
5520A w/
5500A/coil
AC Current – Generate3
(12 to 120) µA
(0.12 to 1.2) mA
(1.2 to 12) mA
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
12 nA + 0.19 mA/A
12 nA + 0.19 mA/A
12 nA + 0.19 mA/A
52 nA + 1.2 mA/A
1 µA + 3.9 mA/A
0.13 µA + 0.19 mA/A
0.13 µA + 0.19 mA/A
0.13 µA + 0.19 mA/A
0.25 µA + 1.2 mA/A
5.5 µA + 3.9 mA/A
1.3 µA + 0.19 mA/A
1.3 µA + 0.19 mA/A
1.3 µA + 0.19 mA/A
2.5 µA + 1.2 mA/A
15 µA + 3.9 mA/A
Fluke 5560A | 10 to 1025 A |
| 23 | - | AC CurrentShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 23 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Current – Generate3
(cont)
(12 to 120) mA
(0.12 to 1.2) A
(1.2 to 3.1) A
(3.1 to 12) A
(12 to 30) A
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(3 to 45) Hz
45 Hz to 1 kHz
(1 to 5) kHz
13 µA + 0.19 mA/A
6.5 µA + 0.12 mA/A
10 µA + 0.19 mA/A
25 µA + 1.2 mA/A
0.15 mA + 3.9 mA/A
0.13 mA + 0.18 mA/A
75 µA + 0.19 mA/A
0.1 mA + 0.19 mA/A
0.53 mA + 1.9 mA/A
0.77 mA + 3.9 mA/A
0.85 mA + 0.29 mA/A
0.58 mA + 0.23 mA/A
0.65 mA + 0.29 mA/A
2.8 mA + 1.9 mA/A
1.9 mA + 0.29 mA/A
1.2 mA + 0.23 mA/A
1.7 mA + 0.29 mA/A
6.9 mA + 1.9 mA/A
19 mA + 0.78 mA/A
15 mA + 0.54 mA/A
55 mA + 3.9 mA/A
Fluke 5560A
AC Current3 –
Measure
(5 to 100) µA
(0.1 to 1) mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
(5 to 100) µA
(0.1 to 1) mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
(5 to 100) µA
(0.1 to 1) mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
(10 to 20) Hz
(20 to 45) Hz
(45 to 100) Hz
57 nA + 4.0 mA/A
0.43 µA + 4.1 mA/A
2.5 µA + 4.1 mA/A
42 µA + 4.0 mA/A
0.42 mA + 4.1 mA/A
45 nA + 1.5 mA/A
3.1 µA + 1.6 mA/A
2.3 µA + 1.6 mA/A
30 µA + 1.5 mA/A
0.30 mA + 1.7 mA/A
41 nA + 0.64 mA/A
0.26 µA + 0.67 mA/A
2.3 µA + 0.67 mA/A
25 µA + 0.60 mA/A
0.26 mA + 0.90 mA/A
3458A | 5 to 100 µA |
| 24 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 24 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
AC Current3 –
Measure (cont)
(5 to 100) µA
(0.1 to 1) mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
50 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
50 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
50 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
50 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
(0 to 2) A
(0 to 20) A
(0 to 2) A
(0 to 20) A
(0 to 2) A
100 Hz to 1 kHz
(1 to 5) kHz
(5 to 20) kHz
(20 to 50) kHz
(50 to 100) kHz
10 Hz to 2 kHz
(2 to 10) kHz
(10 to 30) kHz
41 nA + 0.64 mA/A
0.25 µA + 0.37 mA/A
2.3 µA + 0.37 mA/A
24 µA + 0.30 mA/A
0.27 mA + 1.1 mA/A
0.25 µA + 0.37 mA/A
2.3 µA + 0.37 mA/A
24 µA + 0.30 mA/A
0.27 mA + 1.1 mA/A
0.26 µA + 0.67 mA/A
2.3 µA + 0.67 mA/A
25 µA + 0.60 mA/A
0.37 mA + 3.1 mA/A
0.63 µA + 4.1 mA/A
4.5 µA + 4.1 mA/A
62 µA + 4.0 mA/A
0.92 mA + 10 mA/A
1.8 µA + 5.6 mA/A
16 µA + 5.6 mA/A
0.18 mA + 5.5 mA/A
0.41 mA + 0.5 mA/A
2.3 mA + 0.72 mA/A
0.28 mA + 0.67 mA/A
2.4 mA + 1.9 mA/A
0.45 mA + 2.5 mA/A
3458A
Fluke 8508A
Distortion3 – Measure
20 Hz to 20 kHz
(20 to 100) kHz
100 kHz to 3 GHz
(3 to 6.5) GHz
(6.5 to 21.9) GHz
(21.9 to 50) GHz
1.2 dB
2.3 dB
0.54 dB
1.8 dB
2.4 dB
3.0 dB
8903A
E4448A | ||
| 25 | - | Frequency Response; Phase; Synchro – Measuring Equipment; Resolver – Measuring EquipmentShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 25 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Frequency Response3 –
Measure
1 MHz
2 MHz
10 MHz
20 MHz
30 MHz
50 MHz
100 MHz
0.095 %
0.16 %
0.16 %
0.28 %
0.29 %
0.6 %
1.2 %
Ballantine 1395B-1
TVC
Phase – Measure3
(10 to 32) mV
32 mV to 100 V
(100 to 120) V
(10 to 32) mV
32 mV to 100 V
(10 to 32) mV
32 mV to 100 V
(10 to 32) mV
32 mV to 100 V
10 Hz to 5 kHz
(5 to 10) kHz
(10 to 50) kHz
(50 to 100) kHz
0.23 °
0.059 °
0.12 °
0.23 °
0.059 °
0.23 ° + 0.0043 °/kHz
above 10 kHz
0.059 °
0.4 ° + 0.0081 °/kHz
above 50 kHz
0.06 ° + 0.0069 °/kHz
above 50 kHz
Krohn-Hite 6620
Synchro – Measuring
Equipment
3
(47 to 800) Hz
See Matrix below
North Atlantic 5300
Frequency (6 to 11.8) VLL (> 11.8 to 50) VLL (> 50 to 90) VLL
(47 to 360) Hz ---- 0.000 97 ° 0.0011 °
(> 360 to 600) Hz 0.000 66 ° 0.000 66 ° 0.00097 °
(> 600 to 800) Hz 0.000 66 ° 0.000 97 ° 0.0013 °
Resolver – Measuring
Equipment3
(360 to 800) Hz
See Matric Below
North Atlantic 5300
Frequency (6 to 26) VLL (> 26 to 90) VLL
(360 to 600) Hz 0.000 66 ° 0.000 66 °
(> 600 to 800) Hz 0.000 66 ° 0.000 66 ° | - |
| 26 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 26 of 40
Parameter/Range
Frequency CMC2, 4 (±) Comments
Phase3 – Generate (PF=1)
(10 to 65) Hz
(65 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
(3 to 65) Hz
(65 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 30) kHz
Ø 0.1 °
Ø 0.26 °
Ø 0.51 °
Ø 2.6 °
Ø 5.1 °
Ø 10 °
Ø 0.1 °
Ø 0.2 °
Ø 0.4 °
Ø 1.9 °
Ø 3.9 °
Ø 7.8 °
Fluke 5520A
Fluke 5560A
IV. Electrical – RF/Microwave
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Absolute Power – Measure3
(0 to +20) dBm
(-10 to 0) dBm
(-60 to -10) dBm
(-70 to +20) dBm
(-30 to +20) dBm
100 mW to 2 kW
100 mW to 500 W
9 kHz to 16 GHz
(16 to 18) GHz
9 kHz to 16 GHz
(16 to 18) GHz
9 kHz to 2 GHz
(2 to 16) GHz
(16 to 18) GHz
(19 to 26.5) GHz
(26.5 to 33) GHz
(33 to 35) GHz
(36 to 40) GHz
(41 to 47) GHz
(48 to 50) GHz
10 kHz to 250 MHz
10 kHz to 6 GHz
2.6 %
2.8 %
3.1 %
3.3 %
3.6 %
3.7 %
3.8 %
4.1 %
4.3 %
4.5 %
4.7 %
5.1 %
5.6 %
1.7 %
1.7 %
E4418B, E9304A-H18
E4418B, E4413A
E4418B, 8487A
E4418B, E9304A, couplers
& attenuators | ||
| 27 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 27 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Displayed Average Noise
Level (DANL),
(-165 to -50) dBm
DC to 4 GHz
(> 4 to 20) GHz
(> 20 to 26.5) GHz
(> 26.5 to 50) GHz
0.39 dB
0.67 dB
0.59 dB
1.3 dB
50 Ω termination
Single Sideband Phase
Noise – Measure
Offset
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz
100 MHz
1 MHz to 50 GHz
4.4 dB
3.2 dB
2.8 dB
2.9 dB
2.6 dB
2.4 dB
2.4 dB
2.5 dB
Agilent E4448A Single Sideband measurement capability is limited by the phase noise performance of the standard at
center frequencies being measured. Below is the typical maximum measurement range that can be
expected of this standard.
Offset Frequency Up to 600 MHz (0.6 to 10.2) GHz (10.2 to 26.5) GHz (25.2 to 50) GHz
10 Hz -105 dBc/Hz -85 dBc/Hz -76 dBc/Hz -70 dBc/Hz
100 Hz -105 dBc/Hz -85 dBc/Hz -76 dBc/Hz -70 dBc/Hz
1 kHz -111 dBc/Hz -100 dBc/Hz -92 dBc/Hz -90 dBc/Hz
10 kHz -120 dBc/Hz -112 dBc/Hz -105 dBc/Hz -100 dBc/Hz
100 kHz -125 dBc/Hz -120 dBc/Hz -112 dBc/Hz -105 dBc/Hz
1 MHz -150 dBc/Hz -145 dBc/Hz -138 dBc/Hz -130 dBc/Hz
10 MHz -158 dBc/Hz -150 dBc/Hz -140 dBc/Hz -134 dBc/Hz
100 MHz -158 dBc/Hz -150 dBc/Hz -140 dBc/Hz -134 dBc/Hz
Excess Noise Ratio (ENR)3
– Calibrate Noise Sources,
Up to 20 dB ENR
10 MHz to 18 GHz
(18 to 26.5) GHz
0.52 dB
0.59 dB
346C reference noise source,
8971C noise figure test set,
8970B noise figure meter
Absolute Power3 – Generate
100 mW to 500 W
10 kHz to 6 GHz
1.7 %
E4418B, E9304A, couplers
& attenuators | ||
| 28 | - | PowerShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 28 of 40
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Power Reference3 – Measure
Power Meter Accuracy
Power Sensor Calibration
Factor3
1 mW at 50 MHz
1 mW at 1 GHz
3 µW to 100 mW
(9 to 100) kHz
100 kHz to 1.1 GHz
(1.1 to 4.6) GHz
(4.6 to 10) GHz
(10 to 11.8) GHz
(11.8 to 16.25) GHz
(16.25 to 18) GHz
(18 to 26.5) GHz
(26.5 to 33) GHz
(33 to 38) GHz
(38 to 41) GHz
(41 to 50) GHz
0.68 %
0.71 %
0.29 %
1.1 %
0.55 %
0.59 %
0.63 %
0.68 %
0.76 %
0.89 %
1.8 %
2.1 %
2.4 %
2.7 %
2.8 %
M1110, 1806, 3458A
F1109, 1806, 3458A
11683A
E4418B w/E9304A
Tegam 1806A
w/F1130B & F1135B,
3458A
E4418B w/N8487A
Relative Power3 – Measure
(0 to -10) dB
(-10 to -20) dB
(-20 to -30) dB
(-30 to -40) dB
(-40 to -50) dB
(-50 to -60) dB
(-60 to -70) dB
(-70 to -80) dB
(-80 to -90) dB
(-90 to -100) dB
(-100 to -110) dB
(-110 to -120) dB
(-120 to -127) dB
(0 to -10) dB
(-10 to -20) dB
(-20 to -30) dB
(-30 to -40) dB
(-40 to -50) dB
(-50 to -60) dB
(-60 to -70) dB
(-70 to -80) dB
(-80 to -90) dB
(-90 to -100) dB
(-100 to -110) dB
(-110 to -120) dB
(-120 to -127) dB
2.5 MHz to 1.3 GHz
(1.3 to 26.5) GHz
0.047 dB
0.06 dB
0.074 dB
0.087 dB
0.1 dB
0.1 dB
0.11 dB
0.12 dB
0.13 dB
0.15 dB
0.15 dB
0.28 dB
0.29 dB
0.066 dB
0.06 dB
0.074 dB
0.087 dB
0.1 dB
0.1 dB
0.11 dB
0.12 dB
0.13 dB
0.15 dB
0.15 dB
0.28 dB
0.29 dB
8902A | - |
| 29 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 29 of 40
Parameter/Range
Frequency
CMC2, 4 (±)
Comments
Amplitude Modulation3 –
Measure
Rate: 50 Hz to 10 kHz
Depths: (5 to 99) %
Rate: 20 Hz to 10 kHz
Depths: To 99 %
Rate: 50 Hz to 50 kHz
Depths: (5 to 99) %
Rate: 20 Hz to 100 kHz
Depths: To 99 %
Rate: 50 Hz to 50 kHz
Depths: (5 to 99) %
Rate: 20 Hz to 100 kHz
Depths: To 99 %
150 kHz to 10 MHz
150 kHz to 10 MHz
(0.01 to 1.3) GHz
(0.01 to 1.3) GHz
(1.3 to 26.5) GHz
(1.3 to 26.5) GHz
0.14 % depth + 0.024
% depth/% depth
0.11 % depth + 0.023
% depth/% depth
0.15 % depth + 0.01 %
depth/% depth
0.11 % depth + 0.023
% depth/% depth
0.33 % depth + 0.008
% depth/% depth
0.31 % depth + 0.021
% depth/% depth
8902A
Frequency Modulation3 –
Measure
Rate: 20 Hz to 10 kHz
Dev.: ≤ 40 kHz Peak
Rate: 50 Hz to 100 kHz
Dev.: ≤ 400 kHz Peak
Rate: 20 Hz to 200 kHz
Dev.: ≤ 400 kHz Peak
Rate: 50 Hz to 100 kHz
Dev.: ≤ 400 kHz Peak
Rate: 20 Hz to 200 kHz
Dev.: ≤ 400 kHz Peak
250 kHz to 10 MHz
(0.01 to 1.3) GHz
(0.01 to 1.3) GHz
(1.3 to 26.5) GHz
(1.3 to 26.5) GHz
3.5 Hz + 16 Hz/kHz
3.5 Hz + 7.8 Hz/kHz
6.8 Hz + 39 Hz/kHz
6.8 Hz + 7.8 Hz/kHz
6.8 Hz + 39 Hz/kHz
8902A
Phase Modulation3 –
Measure
Rate: 200 Hz to 10 kHz
(0 to 100) rad
Rate: 200 Hz to 20 kHz
(0 to 100) rad
Rate: 200 Hz to 20 kHz
(0 to 100) rad
150 kHz to 10MHz
(0.01 to 1.3) GHz
(1.3 to 26.5) GHz
36 mrad + 37 mrad/rad
36 mrad + 37 mrad/rad
36 mrad + 37 mrad/rad
8902A | ||
| 30 | - | S-Parameters (Reflection & Transmission)Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 30 of 40
Parameter/Range
Frequency
CMC2 (±)
Comments
S-Parameters (Reflection &
Transmission)3
45 MHz to 6
GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type N: Reflection S11/S22 Linear Magnitude (ρ) 8753E with 85032B
rho 30 kHz to 1.3 GHz (1.3 to 3) GHz (3 to 6) GHz
0 0.0039 0.0051 0.011
0.1 0.0046 0.0061 0.012
0.2 0.0054 0.0072 0.014
0.3 0.0063 0.0086 0.017
0.4 0.0073 0.01 0.02
0.5 0.0085 0.012 0.024
0.6 0.0098 0.014 0.028
0.7 0.011 0.017 0.033
0.8 0.013 0.02 0.038
0.9 0.015 0.023 0.044
1.0 0.017 0.026 0.05
Type N: Reflection S11/S22 Phase (°) 8753E with 85032B
rho 30 kHz to 1.3 GHz (1.3 to 3) GHz (3 to 6) GHz
0 --- --- ---
0.1 2.6 3.5 7
0.2 1.5 2.1 4.1
0.3 1.2 1.7 3.3
0.4 1.1 1.5 2.9
0.5 1 1.4 2.7
0.6 0.96 1.4 2.7
0.7 0.94 1.4 2.7
0.8 0.94 1.4 2.7
0.9 0.94 1.4 2.8
1.0 0.95 1.5 2.9
Type N: Transmission S12/S21 Linear Magnitude (dB) 8753E with 85032B
dB 30 kHz to 1.3 GHz (1.3 to 3) GHz (3 to 6) GHz
-90 6.1 6.4 8.8
-80 2.4 2.6 3.8
-70 0.85 0.91 1.4
-60 0.3 0.32 0.5
-50 0.13 0.14 0.21
-40 0.088 0.1 0.15
-30 0.074 0.087 0.13
-20 0.063 0.076 0.12
-10 0.053 0.066 0.11 | See scope document |
| 31 | - | S-Parameters (Reflection & Transmission)Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 31 of 40
Parameter/Range
Frequency
CMC2 (±)
Comments
S-Parameters
(Reflection &
Transmission)3
45 MHz to 6 GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type N: Transmission S12/S21 Linear Magnitude (dB) 8753E with 85032B
dB 30 kHz to 1.3 GHz (1.3 to 3) GHz (3 to 6) GHz
0 0.042 0.055 0.094
10 0.076 0.089 0.15
Type N: Transmission S12/S21 Phase (°) 8753E with 85032B
dB 30 kHz to 1.3 GHz (1.3 to 3) GHz (3 to 6) GHz
-90 ---- ---- ----
-80 19 20 34
-70 5.9 6.3 10
-60 2 2.2 3.4
-50 0.89 0.98 1.5
-40 0.62 0.71 1
-30 0.53 0.61 0.88
-20 0.46 0.54 0.8
-10 0.39 0.48 0.73
0 0.29 0.38 0.63
10 0.8 0.88 1.2
S-Parameters
(Reflection &
Transmission) 3
45 MHz to 18 GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type N: Reflection S11/S22 Linear Magnitude (ρ) 8510C with 85054D
rho 45 MHz to 2 GHz (2 to 8) GHz (8 to 18) GHz
0 0.01 0.016 0.02
0.1 0.01 0.016 0.02
0.2 0.01 0.016 0.02
0.3 0.01 0.016 0.02
0.4 0.01 0.016 0.021
0.5 0.011 0.017 0.022
0.6 0.011 0.018 0.024
0.7 0.012 0.02 0.027
0.8 0.013 0.022 0.031
0.9 0.014 0.024 0.036
1.0 0.016 0.028 0.041 | See scope document |
| 32 | - | S-Parameters (Reflection & Transmission)Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 32 of 40
Parameter/Range
Frequency
CMC2 (±)
Comments
S-Parameters
(Reflection &
Transmission) 3
45 MHz to 18 GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network Analyzers with
calibration/ verification
kits
Type N: Reflection S11/S22 Phase (°) 8510C with 85054D
rho 45 MHz to 2 GHz (2 to 8) GHz (8 to 18) GHz
0 ---- ---- ----
0.1 5.9 9.3 12
0.2 3 4.7 6
0.3 2 3.2 4.2
0.4 1.6 2.5 3.3
0.5 1.3 2.1 2.8
0.6 1.2 1.9 2.6
0.7 1.1 1.8 2.5
0.8 1 1.7 2.5
0.9 1 1.8 2.6
1.0 1 1.8 2.7
Type N: Transmission S12/S21 Linear Magnitude (dB) 8510C with 85054D
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 18) GHz
-70 0.64 0.82 1.1
-60 0.21 0.28 0.37
-50 0.074 0.089 0.14
-40 0.04 0.046 0.097
-30 0.033 0.034 0.083
-20 0.031 0.034 0.082
-10 0.03 0.032 0.082
0 0.023 0.031 0.081
10 0.18 0.1 0.11 | See scope document |
| 33 | - | S-ParametersShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 33 of 40
Parameter/Range
Frequency
CMC2, 5 (±)
Comments
S-Parameters
(Reflection &
Transmission) 3
45 MHz to 18 GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network Analyzers with
calibration/ verification
kits
Type N: Transmission S12/S21 Phase (°) 8510C with 85054D
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 18) GHz
-70 4.2 5.3 7.2
-60 1.5 1.9 2.7
-50 0.59 0.76 1.2
-40 0.37 0.47 0.9
-30 0.31 0.4 0.84
-20 0.3 0.39 0.83
-10 0.29 0.38 0.82
0 0.24 0.37 0.82
10 1.3 0.84 1
S-Parameters
(Reflection &
Transmission) 3
45 MHz to 26.6 GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type 3.5 mm: Reflection S11/S22 Linear Magnitude (ρ) 8510C with 85052B
rho 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
0 0.0081 0.013 0.016 0.032
0.1 0.0081 0.013 0.016 0.032
0.2 0.0081 0.013 0.016 0.032
0.3 0.0082 0.03 0.016 0.032
0.4 0.0084 0.014 0.017 0.033
0.5 0.0089 0.015 0.019 0.035
0.6 0.0096 0.016 0.021 0.037
0.7 0.011 0.019 0.025 0.046
0.8 0.012 0.022 0.029 0.046
0.9 0.014 0.026 0.034 0.053
1.0 0.016 0.031 0.041 0.062
Type 3.5 mm: Reflection S11/S22 Phase (°) 8510C with 85052B
rho 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
0 53 ---- ---- ----
0.1 4.7 7.4 9.4 19
0.2 2.4 3.8 4.9 9.5
0.3 1.7 2.6 3.4 6.5
0.4 1.3 2.1 2.7 5.1
0.5 1.1 1.8 2.4 4.3
0.6 1 1.7 2.3 3.9 | See scope document |
| 34 | - | S-Parameters (Reflection & Transmission)Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 34 of 40
Parameter/Range
Frequency
CMC2, 5 (±)
Comments
S-Parameters
(Reflection &
Transmission) 3
45 MHz to 26.6 GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type 3.5 mm: Reflection S11/S22 Phase (°) 8510C with 85052B
rho 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
0.7 0.97 1.7 2.3 3.7
0.8 0.97 1.8 2.4 3.7
0.9 1 1.9 2.5 3.8
1.0 1 2 2.7 4
Type 3.5 mm: Transmission S12/S21 Linear Magnitude (dB) 8510C with 85052B
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
-70 0.64 0.82 1.2 5.2
-60 0.21 0.28 0.39 1.5
-50 0.074 0.089 0.14 0.43
-40 0.04 0.046 0.094 0.21
-30 0.032 0.035 0.079 0.16
-20 0.03 0.034 0.078 0.15
-10 0.029 0.033 0.077 0.15
0 0.023 0.031 0.077 0.15
10 0.022 0.031 0.077 0.15
Type 3.5 mm: Transmission S12/S21 Phase (°) 8510C with 85052B
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
-70 4.2 5.3 7.6 27
-60 1.5 1.9 2.8 9.9
-50 0.59 0.76 1.2 3.1
-40 0.37 0.47 0.9 1.7
-30 0.31 0.4 0.83 1.4
-20 0.29 0.4 0.82 1.4
-10 0.29 0.39 0.81 1.4
0 0.24 0.38 0.81 1.4
10 0.23 0.38 0.81 1.4 | See scope document |
| 35 | - | S-Parameters (Reflection & Transmission)Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 35 of 40
Parameter/Range
Frequency
CMC2, 5 (±)
Comments
S-Parameters (Reflection &
Transmission) 3
(2 to 50)
GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type 2.4 mm: Reflection S11/S22 Linear Magnitude (ρ) 8510C with 85056D
rho (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz (26.5 to 50) GHz
0 0.0081 0.013 0.016 0.032
0.1 0.0081 0.013 0.016 0.032
0.2 0.0081 0.013 0.016 0.032
0.3 0.0082 0.03 0.016 0.032
0.4 0.0084 0.014 0.017 0.033
0.5 0.0089 0.015 0.019 0.035
0.6 0.0096 0.016 0.021 0.037
0.7 0.011 0.019 0.025 0.046
0.8 0.012 0.022 0.029 0.046
0.9 0.014 0.026 0.034 0.053
1.0 0.016 0.031 0.041 0.062
Type 2.4 mm: Reflection S11/S22 Phase (°) 8510C with 85056D
rho 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
0 ---- ---- ---- ----
0.1 7.4 9.4 19 31
0.2 3.8 4.9 9.5 15
0.3 2.6 3.4 6.5 11
0.4 2.1 2.7 5.1 8.3
0.5 1.8 2.4 4.3 7
0.6 1.7 2.3 3.9 6.4
0.7 1.7 2.3 3.7 6.1
0.8 1.8 2.4 3.7 6.1
0.9 1.9 2.5 3.8 6.2
1.0 2 2.7 4 6.5
Type 2.4 mm: Transmission S12/S21 Linear Magnitude
(dB) 8510C with 85056D
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
-70 0.82 1.2 5.2 8.8
-60 0.28 0.39 1.5 2.5
-50 0.089 0.14 0.43 0.73
-40 0.046 0.094 0.21 0.36
-30 0.035 0.079 0.16 0.27
-20 0.034 0.078 0.15 0.27
-10 0.033 0.077 0.15 0.27
0 0.031 0.077 0.15 0.27 | 2 to 50 GHz |
| 36 | - | Fiber OpticShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 36 of 40
Parameter/Range
Frequency
CMC2, 5 (±)
Comments
S-Parameters (Reflection &
Transmission) 3
(2 to 50)
GHz
See tables below
(Interpolate CMC’s between
cardinal points listed)
Network analyzers with
calibration/ verification
kits
Type 2.4 mm: Transmission S12/S21 Linear Magnitude
(dB) 8510C with 85056D
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
10 0.031 0.077 0.15 0.27
Type 2.4 mm: Transmission S12/S21 Phase (°) 8510C with 85056D
dB 45 MHz to 2 GHz (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz
-70 5.3 7.6 27 46
-60 1.9 2.8 9.9 17
-50 0.76 1.2 3.1 5.3
-40 0.47 0.9 1.7 2.9
-30 0.4 0.83 1.4 2.4
-20 0.4 0.82 1.4 2.4
-10 0.39 0.81 1.4 2.4
0 0.38 0.81 1.4 2.4
10 0.38 0.81 1.4 2.4
V. Optical Quantities
Parameter/Equipment
Range
CMC2, 7 (±)
Comments
Fiber Optic3
Power – Measuring
Equipment & Measure:
(800 to 1000) nm
(1000 to 1650) nm
Wavelength – Measuring
Equipment & Measure
Linearity (1310 to 1550)
nm
OTDR Length
3
(-80 to +10) dBm
(-90 to +10) dBm
(600 to 1270) nm
(1270 to 1650) nm
(1310 & 1550) nm
(0 to 60) dB
300 ft
0.15 dB
0.1 dB
0.59 nm
0.093 nm
0.58 nm
0.15 dB
0.17 ft
81634A power sensor
81624B power sensor
86142B optical spectrum
analyzer
86120C multiwavelength
multimeter
81654C laser source
8156A optical attenuator,
81654A laser source
Calibrated fiber optic cable | 2 to 50 GHz |
| 37 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 37 of 40
Parameter/Equipment
Range
CMC2, 7 (±)
Comments
Irradiance
Up to 4000 W/m2
1.4 %
Pyranometer
VI. Mechanical
Parameter/Equipment
Range
CMC2, 5, 7 (±)
Comments
Balances3
(1 to 500) g
Matrix value x R
Class 6 weights
Unit Under Test Resolution
0.001 g 0.01 g 0.1 g 1 g
1 g 0.83
2 g 0.85
5 g 1.0
10 g 1.5 0.83 0.83
20 g 2.5 0.85
50 g 1.0
100 g 1.5 0.83
200 g 2.5 0.85
500 g 1.0
Torque Equipment3
(2 to 200) ozf·in
(1 to 10) lbf·in
(5 to 50) lbf·in
(40 to 400) lbf·in
(100 to 1000) lbf·in
(25 to 250) lbf·ft
(60 to 600) lbf·ft
(650 to 2000) lbf·ft
2.3 %
2.3 %
0.3 %
0.3 %
0.31 %
0.3 %
0.29 %
0.65 %
CDI Suretest system
Scales3
Up to 1000 lb
0.82 x R
Class 6 weights
Force3 – Measure &
Measuring Equipment
(0 to 200) lbf
(200 to 1000) lbf
(1000 to 10 000) lbf
0.42 lbf
2.9 lbf
22 lbf
Mark-10 load cells | ||
| 38 | - | Pneumatic Measuring Equipment; Avionics Instrumentation; Temperature; HumidityShow page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 38 of 40
Parameter/Equipment
Range
CMC2, 5, 7 (±)
Comments
Pressure Gages,
Transducers &
Calibrators – Measure &
Measuring Equipment3
Pneumatic Measure
Pneumatic Measuring
Equipment
(-14.6 to 0) psig
(1 to 15) psia
(0 to 30) psig
(30 to 100) psig
(100 to 1000) psig
(1000 to 5000) psig
(5000 to 10 000) psig
(-12 to 100) psig
0.013 psi
0.0092 psi
0.017 psi
0.047 psi
0.46 psi
5.8 psi
9.6 psi
0.041 psi
Fluke 700PV4
Fluke 700PA4
Fluke 700P05
Fluke 750R06
Fluke 750R08
Fluke 700P30
Fluke 700P31
Fluke 719
Avionics
Instrumentation3
Altitude
Air Speed
(-2000 to 80 000) ft
(0 to 1050) knots
3.7 ft + 0.085 %
0.058 knots + 0.013 %
Raptor Scientific
PPCM
Avionics
Instrumentation
3
Altitude
Air Speed
Up to 60 000 ft
(0 to 32) inHg
Up to 50 knots
(> 50 to 1000) knots
(0 to 68) inHg
3.4 ft + 0.02 %
0.000 92 inHg + 0.0067 %
0.25 knots
0.16 knots
0.0019 inHg + 0.0066 %
Fluke 7750i
VII. Thermodynamics
Parameter/Equipment
Range
CMC2, 7 (±)
Comments
Temperature3 – Measure
(-197 to 660) °C
0.012 °C +
0.000 062 °C/°C
Fluke 5626 PRT, 3458A
Humidity3 – Measuring
Equipment
(10 to 90) % RH
1.1 % RH
Rotronic HP32 w/
HCA2A probe | See scope document |
| 39 | AMS 2750F | - | - |
| 40 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2737.02) Revised 7/30/2026 Page 40 of 40
2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs
represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually
using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration
performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device
and to influences from the circumstances of the specific calibration.
3 Field calibration service is available for this calibration. Please note the actual measurement
uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found
on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of
calibration and for other possible adverse effects such as those caused by transportation of the
calibration equipment. The usual allowance for the actual uncertainty introduced by the item being
calibrated, ( e.g., resolution) must also be considered and this, on its own, could result in the actual
measurement uncertainty achievable on a customer’s site being larger than the CMC.
4 The stated measured values are determined using the indicated instrument (see Comments). This
capability is suitable for the calibration of the devices intended to measure or generate the measured
value in the ranges indicated. CMC’s are expressed as either a specific value that covers the full range
or as a percentage or fraction of the reading plus a fixed floor specification.
5 In the statement of CMC uncertainty, the value is defined as the percentage of reading unless otherwise
indicated; L represents the length of displacement in inches and R represents the resolution of the unit
under test.
6 This scope meets A2LA’s P112 Flexible Scope Policy.
7 The type of instrument or material being calibrated is defined by the parameter. This indicates the
laboratory is capable of calibrating instruments that measure or generate the values in the ranges
indicated for the listed measurement parameter. | ||
| 41 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; ANSI/NCSL Z540.3-2006 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Other Locations
1 other site in this organization
Labs with overlapping accredited scope in United States
- Hoffer Calibration Services, LLC (a Subsidiary of Hoffer Flow Controls, Inc.)Elizabeth City, NC · under 1 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- ACR Technical ServicesNewport News, VA · ~100 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- TRESCAL, INC. - Richmond, VAProvidence Forge, VA · ~147 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- SP HB Instrument Calibration LaboratoryPocomoke City, MD · ~206 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- MSI-Viking GageDanville, VA · ~285 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.