Registers refreshed 2026-11-08.See refresh dates
Japan

ALPS ALPINE CO., LTD. EMC TEST LAB Furukawa

6-3-36 Furukawa Nakazato, Osaki-City, Miyagi-Prefecture , 989-6181, Japan, Osaki-City, Miyagi-Prefecture, Japan

A2LA 2015.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
7
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 7 standard numbers and the 7 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methodsSome clausesExclusion

Limits written next to it

ISO 11452-4 (2005, 2011, 2020 [excluding clause 6.2])

Some clauses. Written next to it on line 1 of A2LA certificate 2015.01.

ISO 11452-4 (2005, 2011, 2020 [excluding clause 6.2])

Exclusion. Written next to it on line 1 of A2LA certificate 2015.01.

ISO 11452-4 (excluding clause 6.2)

Some clauses. Written next to it on line 1 of A2LA certificate 2015.01.

ISO 11452-4 (excluding clause 6.2)

Exclusion. Written next to it on line 1 of A2LA certificate 2015.01.

ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fieldsExclusion

Limits written next to it

ISO 11452-8 (2015) (excluding section 8.3.2)

Exclusion. Written next to it on line 1 of A2LA certificate 2015.01.

ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads

Read from the A2LA scope document we downloaded on 2025-12-02. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines
A2LA

ISO/IEC 17025

Active

2015.01

The scope document we hold says it is valid until 2027-02-28.

View scope

Accredited scope, certificate 2015.01

LineMethodMatrixRange
1ISO/IEC 17025:2017; ISO 10605; ISO 11452-4; ISO 11452-2; ISO 11452-8--
2ISO 7637-2; ISO 7637-3; ISO 16750-2; SAE J1113-25; ANSI C63-to 40000 MHz
3ISO/IEC 17025:2017; ISO-ILAC-IAF Communiqué dated April 2017; IEC 17025--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

6-3-36 Furukawa Nakazato, Osaki-City, Miyagi-Prefecture , 989-6181, Japan, Osaki-City, Miyagi-Prefecture, JP

38.57760, 140.95597

Open in Maps

Labs with overlapping accredited scope in Japan

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.