9 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform ASTM E21 testing. These labs commonly handle Metal matrices. From the accredited scope text: “ASTM E21-20 Impact: Charpy V and U notch (-196°C and -101°C to ambient temperature) BS EN ISO 148-1:2016 ASTM E23-24 ASTM A370-23 Brinell testing (HBW 10/3000 & 5/750) BS EN ISO 6506-1:2014 ASTM E10-2” “ASTM E21-20 Stress Rupture Plain and notched stress rupture (Temperature range 600 to 1000°C) (Forces >10KN) ASTM E139-11(2018) ASTM E292-24 BS EN 2002-005:2007 Impact: Charpy (V-notch) and (temperatu” “ASTM E21-20 A Pipes and tubes Crush & Flattening BS EN ISO 8492:2013 BS 6323:Part 1:1982 (Withdrawn) ASTM A370-24 A Fasteners (Including Bolts, Screws and Nuts) Proof Load and Tension BS EN ISO 898-1:” “ASTM E21 CON Fracture Toughness: CTOD and K1c (in the temperature range -196°C and -120ºC to ambient, three point specimen) BS 7448-1 ASTM E1290 (withdrawn) ISO 12135 ASTM E399 ASTM E1820 CON Metallur”
Hereford, GB
ASTM E21-20 Tensile (temperature range -80ºC to ambient and -196 ºC) (Forces up to 600 kN) Documented In-house Methods 6-6823 and 6-6824 Physical Tests Dynamic Young’s Modulus of Elasticity at ambient temperature A
Wolverhampton, GB
ASTM E21 CON Fracture Toughness: CTOD and K1c (in the temperature range -196°C and -120ºC to ambient, three point specimen) BS 7448-1 ASTM E1290 (withdrawn) ISO 12135 ASTM E399 ASTM E1820 CON Metallurgical T
Banbury, GB
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD. 19 Wildmere Rd. Banbury, United Kingdom OX16 3JU Steve Atkins Email: s.atkins@wmtr.co.uk www.wmtr.co.uk MECHANICAL Valid To: Ju
South Yorkshire, GB
ASTM E21 Proof and Tensile strength (temperature - ambient) (forces from 0.2 kN - 2000 kN) Documented In-House Method MTP2 Bolts, screws and nut Tension and compression To documented plans agreed with clients. BS EN ISO 898
West Midlands, GB
ASTM E21-20 A Pipes and tubes Crush & Flattening BS EN ISO 8492:2013 BS 6323:Part 1:1982 (Withdrawn) ASTM A370-24 A Fasteners (Including Bolts, Screws and Nuts) Proof Load and Tension BS EN ISO 898-1:2013 BS EN ISO
South Yorkshire, GB
ASTM E21-20 Impact: Charpy ‘V’ & “U” notch (-196°C and -80°C to ambient) Lateral expansion and % Shear BS EN ISO 148-1:2016 ASTM E23-25 ASTM A370-24a ASTM A923-23 Method B Izod BS 131:Part 1:1961(Incorporating Amendment
Aberdeen, GB
ASTM E21 Altens Tensile (temperature range 10ºC to -196 ºC BS EN ISO 6892-3 Altens Charpy impact at temperatures between ambient and 100°C and - 130°C and at -196°C BS EN ISO 148-1 ASTM E23 ASTM A370 Altens
West Midlands, GB
ASTM E21-20 Impact: Charpy V and U notch (-196°C and -101°C to ambient temperature) BS EN ISO 148-1:2016 ASTM E23-24 ASTM A370-23 Brinell testing (HBW 10/3000 & 5/750) BS EN ISO 6506-1:2014 ASTM E10-23 ASTM A370-23
Sheffield, GB
ASTM E21-20 Stress Rupture Plain and notched stress rupture (Temperature range 600 to 1000°C) (Forces >10KN) ASTM E139-11(2018) ASTM E292-24 BS EN 2002-005:2007 Impact: Charpy (V-notch) and (temperatures from -80
This page is a fixed slice of the register: every ASTM E21 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.