40 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN ISO 6507-1 testing. These labs commonly handle Metal, Drinking water matrices. Most frequently tested analytes via this method in United Kingdom: Hardness. From the accredited scope text: “EN ISO 6507-1: 2023 A Brinell Hardness (HB 1/10 and HB 1/30) BS EN ISO 6506-1:2014 A Charpy impact testing up to 300 joules and from 233 K to ambient temperature BS EN ISO 148-1:2016 A Micrographic de” “EN ISO 6507-1:2023 A Flattening test BS EN ISO 8492:2013 Tensile and tensile shear test BS EN ISO 17660-1:2006 Metallurgical Testing Phase Volume Fraction (Ferrite Count) ASTM E562-19e1 A Corrosion Te” “EN ISO 6507-1 ASTM E92 MID Vickers Hardness (Low Force and Microhardness) (HV0.1, HV0.2 and HV0.5) BS EN ISO 6507-1 ASTM E92 ASTM E384 MID Proof loading: Bearings and bushes Proof Loading (Forces up t” “EN ISO 6507-1:2023 Dimensional Tests Relative Rib Area BS EN ISO 15630-1:2019 BS EN ISO 15630-2:2019 BS EN ISO 15630-3:2019 Effective Cross-sectional area Projected and relative rib area BS 4449:1997”
Gateshead, GB
EN ISO 6507-1:2023 ASTM E92-23 GAT Vickers Micro / Low force (Hv0.3, 0.5 & Hv1.0) BS EN ISO 6507-1:2023 ASTM E384-22 GAT Impact: Charpy at -80°C to ambient temperature ASTM E23- 25 ASTM A370-24a BS EN ISO 14
Hereford, GB
EN ISO 6507-1:2023 ASTM E92-23 Brinell (HB10/3000 and 2.5/187.5) BS EN ISO 6506-1:2014 ASTM E10-23 Rockwell (B and C scales only) BS EN ISO 6508-1:2023 ASTM E18-24
South Glamorgan, GB
EN ISO 6507-1 A Charpy V-notch impact Temperatures at -196°C and -80°C to Ambient BS EN ISO 148-1 A WELDMENTS Mechanical and Metallurgical Tests Bend, Fracture, Hardness, Tensile, Charpy and Macro- ex
Derby, GB
EN ISO 6507-1:2018 D Vickers Hardness Test (10 kg and 30 kg) BS EN ISO 6507-1:2018 A, C Vickers Low Load Hardness Test (0.2 kg, 0.5 kg & 1.0 kg) BS EN ISO 6507-1:2018 A,C Vickers Hardness Test (5 kg) BS E
Wolverhampton, GB
EN ISO 6507-1 ASTM E92 CON Vickers – Micro (HV0.2) BS EN ISO 6507-1 ASTM E384 CON Impact: Charpy at -196°C and -120°C to ambient temperature including % shear and lateral expansion BS EN ISO 148-1 ASTM A370
Norfolk, GB
EN ISO 6507-1 ASTM E92 Tensile at ambient temperature (Forces up to 600 kN) BS EN ISO 6892-1 ASTM E8/E8 ASTM A370 ASTM B557 Impact testing: Charpy (-196°C and -123°C to Ambient Temperature) BS EN ISO 148-1
Rotherham, GB
EN ISO 6507-1:2023 Tensile (Ambient) (Forces up to 50 kN) BS EN ISO 6892-1: 2019 ASTM E8/E8M-24 Plastic strain ratio (r) ASTM E517-19 Strain hardening exponent (n) ASTM E646-16 Metallurgical Tests Grain siz
London, GB
EN ISO 6507-1: 2023 A Brinell Hardness (HB 1/10 and HB 1/30) BS EN ISO 6506-1:2014 A Charpy impact testing up to 300 joules and from 233 K to ambient temperature BS EN ISO 148-1:2016 A Micrographic determination o
Glasgow, GB
EN ISO 6507-1:2023 Mechanical Fasteners (Nails, screws and Staples) Withdrawal Force BS EN 14566:2008 + A1:2009 (Clause 5.4) Pull Through Force BS EN 14566:2008 + A1:2009 (Clause 5.8) Drilling Time Test BS EN 14566:2008
Southampton, GB
EN ISO 6507-1 :2023 Mechanical, Metallurgical Tests Weldments, Steels & Aluminiums Tests designated in specified welding codes as detailed below: Bend, Fracture, Hardness, Macro- examination BS EN ISO 5173:2023 BS E
Radstock, GB
EN ISO 6507-1:2023 A Flattening test BS EN ISO 8492:2013 Tensile and tensile shear test BS EN ISO 17660-1:2006 Metallurgical Testing Phase Volume Fraction (Ferrite Count) ASTM E562-19e1 A Corrosion
Oldham, GB
EN ISO 6507-1:2023 ASTM E92-23 A Brinell Hardness (HBW 1/30 and HBW 10/3000) BS EN ISO 6506-1:2014 ASTM E10-23 ASTM A370-24a A Rockwell Hardness (HRC, HRB) BS EN ISO 6508-1:2023 ASTM E18-24 ASTM A370-24a A
Warrington, GB
EN ISO 6507-1:2023 A Impact: Charpy V-notch Temperature range Ambient to -70°C and -196°C BS EN ISO 148-1:2016 ASTM E23-24 A Tensile (Ambient) Force up to 600 kN BS EN ISO 6892-1:2016 A END
Newcastle-upon-Tyne, GB
EN ISO 6507-1:2023 ASTM E92-23 END
Kent, GB
EN ISO 6507-1:2018 A Impact: Charpy V-notch (Temperatures -50°C to ambient) BS EN ISO148-1 :2016 A Tensile: Ultimate tensile strength only ( Forces from 2 kN to 500 kN) BS EN ISO6892-1 :2019 Method B A
Sheffield, GB
EN ISO 6507-1:2023 ASTM E92-23 Corrosion Resistance to pitting corrosion ASTM G48-11(2020) (Method A) Inter-granular corrosion ASTM A262-15 Practice E(2021) ASTM G28- 22 Method A BS EN ISO 3651-2:1998 Method A De
Sheffield, GB
EN ISO 6507-1:2023 including case depth BS EN ISO 2639:2002 (Withdrawn) Rockwell C BS EN ISO 6508:2023 ASTM E18:2024 Metallurgical tests Grain size determination ASTM E112:2024 Inclusion content ASTM E45:2018a
South Yorkshire, GB
EN ISO 6507-1 ASTM E92 Vickers Micro-hardness (HV0.3, HV0.5 and HV1.0) BS EN ISO 6507-1 ASTM E384 Impact: Izod BS 131:Part 1 Charpy (V and U notches) (temperatures, -196°C and -120°C to ambient) BS EN ISO 1
Wolverhampton, GB
EN ISO 6507-1:2023 Dimensional Tests Relative Rib Area BS EN ISO 15630-1:2019 BS EN ISO 15630-2:2019 BS EN ISO 15630-3:2019 Effective Cross-sectional area Projected and relative rib area BS 4449:1997 (Withdrawn) BS 4
West Midlands, GB
EN ISO 6507-1:2023 ASTM E92-23 A Vickers HV10 BS EN ISO 6507-1:2023 ASTM E92-23 B Low Force Vickers HV0.3, 0.5 and 1 BS EN ISO 6507-1:2023 A Micro Hardness HV 0.10 ASTM E384-22 A Hk 0.3, 0.5 BS EN IS
West Yorkshire, GB
EN ISO 6507-1 ASTM E92 Rockwell Hardness (HRC, HRBW, HRA, HR15N & HR30N) BS EN ISO 6508-1 ASTM E18 Bend BS EN ISO 7438 ASTM E290 Shear BS EN 28749
Burton on Trent, GB
EN ISO 6507-1:2023 ASTM E92-23 Rockwell (B & C Scale) BS EN ISO 6508-1:2023 ASTM E18-24 Impact: Charpy at -196°C and -80°C to ambient temperature (Including lateral expansion & shear) ASTM E23- 25 ASTM A923-23 M
Powys, GB
EN ISO 6507-1:2023 Impact: Charpy V-notch ( -50°C to Ambient) BS EN ISO 148-1:2016 Tensile: Ambient Temperature – (UTS Only) (Load 0.2kN up to 300 kN) BS EN ISO 6892-1:2019 Weldments Tests designated in specific w
South Yorkshire, GB
EN ISO 6507-1:2023 Metallurgical Tests Grain size (Comparison & Linear Intercept Methods) ASTM E112-24 BS EN ISO 643:2024 ASTM E1181-02(2023) ISO 14520: 2000 ASTM E930-18 Decarburisation depth by microscopical me
Derby, GB
EN ISO 6507-1: 2023
Tyne & Wear, GB
EN ISO 6507-1:2023 Charpy Impact (V notch) (-101ºC to ambient & -196ºC) including lateral expansion and percentage shear BS EN ISO 148-1:2016 ASTM A370-24a ASTM E23-25 Izod (ambient) BS 131-1:1961 (2007) Bend BS EN I
Wolverhampton, GB
EN ISO 6507-1:2023 ASTM E384-22 Micro Vickers (Hv0.3) BS EN ISO 6507-1:2023 ASTM E92-23 Brinell (HBW 10/3000) BS EN ISO 6506-1: 2014 ASTM E10-23 Rockwell (B & C Scales) BS EN ISO 6508-1: 2016 ASTM E18- 24 I
Worcester, GB
EN ISO 6507-1:2023 Chemical Tests Elemental analysis Low Alloy and Stainless Steel Boron, Carbon, Chromium, Copper, Molybdenum, Manganese, Nitrogen, Nickel, Phosphorous, Silicon, Sulphur, Vanadium. Documented in house
Aberdeen, GB
EN ISO 6507-1 ASTM E92 Altens Brinell hardness (1/30 HBW) BS EN ISO 6506-1 ASTM E10 Altens Rockwell hardness (HRBW and HRC scales) BS EN ISO 6508-1 ASTM E18 Altens
Derbyshire, GB
EN ISO 6507-1:2023 ASTM E92-2023 B Vickers micro hardness HV0.1 BS EN ISO 6507-1:2023 B Brinell (HBW 1/30, HBW 10/500 and HBW 10/3000) BS EN ISO 6506-1:2014 ASTM E10-23 B Rockwell (B and C Scales) BS EN ISO 650
Abingdon, GB
EN ISO 6507-1:2023 ASTM E92-23 Impact: Charpy (V- notch) (-196°C and -50°C to Ambient Temperature) BS EN ISO 148-1:2016 Percentage shear Lateral Expansion BS EN ISO 148-1:2016 Tensile: Ambient Tempera
West Midlands, GB
EN ISO 6507-1:2023 ASTM E384-22 ASTM E92-23 Impact:- Charpy (-196 °C and -120 °C to ambient temperature) Including lateral expansion and percentage shear by comparison BS EN ISO 148-1:2016 ASTM E23-24 ASTM A370:2024a
Sheffield, GB
EN ISO 6507-1:2018 Tensile: Tensile test up to 1000kN (ambient temperature) BS EN ISO 4136:2022 WELDMENTS Test designated in specified welding codes, as detailed below - Bend, Fillet Fracture,Macrostructure & Microstructu
Derbyshire, GB
EN ISO 6507-1:2023 Low Force Vickers HV 0.3 HV 1 BS EN ISO 6507-1:2023 END
Lancaster, GB
EN ISO 6507-1 ASTM E92 MID Vickers Hardness (Low Force and Microhardness) (HV0.1, HV0.2 and HV0.5) BS EN ISO 6507-1 ASTM E92 ASTM E384 MID Proof loading: Bearings and bushes Proof Loading (Forces up to ± 400k
West Midlands, GB
EN ISO 6507-1:2023 ASTM E92-23 Impact: Charpy V-notch (-196°C and -85°C to Ambient) BS EN ISO 148-1:2016 ASTM E23-25 ASTM A370-24a Tensile: Ambient Temperature (Load up to 600 kN) BS EN ISO 6892-1:2019 AS
Biggleswade, GB
EN ISO 6507-1:2023 ASTM E92-23 Main Lab Brinell (HBW 10/3000) BS EN ISO 6506-1:2014 ASTM E10-23 Main Lab Impact Charpy V notch including % shear and lateral expansion (ambient to -60°C) ASTM E23:24 ASTM A37
West Midlands, GB
EN ISO 6507-1:2023 Low load Hardness (Vickers HV0.5) BS EN ISO 6507-1:2023 ASTM E384-22
Sheffield, GB
EN ISO 6507-1:2023 ASTM E92-23 Brinell (HB 10/3000) BS EN ISO 6506-1:2014 ASTM E10-23
Staffordshire, GB
EN ISO 6507-1:2023 Tensile testing (forces up to 50 kN) BS EN ISO 6892-1:2019 Method A2 Neutral salt spray corrosion of coated metals BS EN ISO 9227:2022+A1:2024 Resistance to cyclic corrosion BS EN ISO 11997-1:2017 Cycle B
This page is a fixed slice of the register: every EN ISO 6507-1 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.